Having problems with your Acer AL1916W 19" LCD Monitor ?

Monitor problem The monitor was working just fine. Now it won't show anything on screen.I checked it out on several computers and it still doesn't show anything. When I turn it on the green light comes on then it shows the orange light. It never shows the acer logo when turned on. My cables are ok cause they work fine with other monitors. This monitor is only few months old so it can't be old age


Answers :

Hi...there,
\015\012It's turns blue to power safe mode (yellow) it's prevent futher damaged to your monitor. It's seems you got a busted backlight inverter. Need to replaced a new one...Since you only got it for a few months, send it back to Acer for a replacement of a new backlight inverter... Have a nice day!
The monitor was working just fine. Now it won't show anything on screen.I checked it out on several computers and it still doesn't show anything. When I turn it on the green light comes on then it shows the orange light. It never shows the acer logo when turned on. My cables are ok cause they work fine with other monitors. This monitor is only 1 year old so it can't be old age
Repair Help & Product Troubleshooting for Acer AL1916W 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor problem The monitor was working just fine. Now it won't show anything on screen.I checked it out on several computers and it still doesn't show anything. When I turn it on the green light comes on then it shows the orange light. It never shows the acer logo when turned on. My cables are ok cause they work fine with other monitors. This monitor is only few months old so it can't be old age


Hi...there,\015\012It's turns blue to power safe mode (yellow) it's prevent futher damaged to your monitor. It's seems you got a busted backlight inverter. Need to replaced a new one...Since you only got it for a few months, send it back to ... Acer AL1916W 19" LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

Liquid Video monitor goes black after 30 seconds


I acquired one of these at a flea market. Same problem, same solution as skotkolr's. The "runs for 30 seconds" or cycles on and off is caused by the run capacitor for the switching power supply controller IC. It's usually 47uF/25V and can be found on ... Computer Monitors

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

MAG Innovision LT916S monitor problem


Hi this is the way how to examine\015\012what's wrong with your monitors. After you turned it on and the screen went black, you have to check that if you can see the image on the screen or\015\012not by shining a flashlight into the screen, not ... Mag Innovision 19" LCD Flat-Panel Monitor LT916S

My Lg Monitor wont show screen (Power Button Flashing)


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG Flatron L1750S 17" LCD Monitor

Monitor will not turn on- was working fine a week ago!


Hi this is the way how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen\015\012went gray or stopped working, you have to check that if you can see the image on the screen or\015\012not by shining a fl ... Gateway FPD1960 19" Flat Panel LCD Monitor

Picture goes black on Mag Innovision LT765b


I used to repair LCD monitor from Dell. It works for me. You might be using\015\012these following steps to examine what wrong with your monitor. After you turned PC on and\015\012monitor stopped working or went black, you have to check that if ... Mag Innovision LT765b 17" Flat Panel LCD Monitor

Fans turn on .. now what


It has a fan problem. You need to check if all fans are working properly.Also install open manage server administrator on the server from Dell support website and check for hardware logs if you can see something wrong?You will see the roo ... Dell PowerEdge 1800 Server

Nothing on the screen at startup


If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

Monitor Turns Black


This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

I have a problem with my toshiba a135. All the power lights are on but my screen is blank. can you tell what the problem is?


Hi.\015\012\015\012\015\012To start do the simple reset described below, this is the first step in troubleshooting.\015\012\015\012\015\012Disconnect the power adapter cord and remove battery, wait ten minutes, connect the pow ... Toshiba Satellite A135-S2276 Notebook

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Blank screen i have 3 samsung 740B 17" monitors its been 2 years and i have 2 down,both source buttons light up telling me power is good.ive tried different monitor with the same cpu and it works fine. i have 7 work stations at my work 4 have dell monitors running for 5 years +, and 3 are samsung,which i only have 1 left working now. only had them for 2 years. just woundering if theres anything i can try or are they garbage?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 740b 17" LCD Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

No display at startup but showing all lights


First we need to test if the problem should be the LCD screen.\015\012The easiest and most foolproof method for testing your lcd screen is to\015\012hook up the laptop to an external monitor. If the video output on\015\012the external monitor l ... HP Compaq 6735s Notebook

Flashing green power light - Black screen


I had the same problem with an AOPEN 17' lcd that was left behind at a rental property... I plugged it into my dell dimmension 4400 in place of my old analog. It worked fine the fist night, and got up and when turned it on again it had the famed gree ... AOpen F75PS 17" Flat Panel LCD Monitor

I have a 3 yr Dell UltraSharp 1905FP LCD monitor. Recently, when I turn it on, the power on green light would blink continuously for about 1 minute with no picture before the light become steady green and have picture (everything working). Now it is up to 5 minutes. Other than waiting for the monitor to display the video, everything is fine. It acts like it is waiting for something to warm up. Does anyone know what is the problem? Thanks.


Yman1949, Your 1905FP unit is not working as it was designed to do! Here is something you can relate your problem to. The white light needed to see what is on your lcd panel is produced by "cold-cathode-fluorescent-lamps" (2) that require 600-1200va ... Dell UltraSharp 1905FP 19" LCD Monitor

Monitor keeps blank even the power lLED is on green


Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

Samsung SyncMaster 2243 Monitor wont display analog


Have you tried the dvi output yet? All the onscreen menu's work fine correct? It sounds like its possibly set on the wrong input or setting. But it is possible its something more serious. Once I have more input from you I can assist you further. ... Samsung SyncMaster 2243BWT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9380 seconds