Having problems with your PC Laptops ?

How to set the boot sequence on the Sharp PC-9000

\015 How do I reset the boot sequence from within an older Sharp PC-9000? The computer starts up, but shows the error message "cannot find the OS"\015

Answers :

I'm not sure with the BOIS version of this model, but try pressing F12 key when it start loading most of the time you will get option to select boot device. if not goto COMS and change the 1st booting device to hard disk.
Repair Help & Product Troubleshooting for PC Laptops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

How to set the boot sequence on the Sharp PC-9000


I'm not sure with the BOIS version of this model, but try pressing F12 key when it start loading most of the time you will get option to select boot device. if not goto COMS and change the 1st booting device to hard disk. ... PC Laptops

Is the 2400 Toast ???


Sounds like HDD and Cd-Rom are jumpered wrong (If on a PATA interface cable), make sure HDD is set to master, and cd-rom set to slave, alot of the early socket 775 board (mainly abit boards) initialised a few of its devices, shut down, and then start ... Dell Dimension 2400 PC Desktop

My dell 5150 dimension will not boot up and says no boot device available. I have gone into system setup and tried a few things and at one point got a message that said drive 0 not found and now it is back to no boot drive.


Go back to setup and check your boot sequence. It may not be looking for your hard disk. Do you know what Hard disk you have? It may not be wired in there properly if it's in the boot sequence. Set DVD/CD to 1st boot device and put in your installati ... Dell OptiPlex GX280 PC Desktop

IBM T30 laptop- replacing CMOS battery


Provided the laptop booted (albeit to requiring bios set up), all is well. The data such as time needs to be re-entered manually, because since the battery is required to maintain volatile memory, when the battery goes flat or is removed, the data is ... IBM ThinkPad T30 2366 Notebook

Verbatim external drive 500mb prevents bootup


Try changing the boot sequence in your CMOS setup, set your Main hard drive(I think it's IDE 0) and the rest is up to you whethere you will set the CD-ROM or the external HDD as the 2nd boot device. Once the computer starts just press DEL(most generi ... PC Desktops

Harddrive array sequence causing system in booting


If the only drive you changed was the drive that failed and all the others are in the correct sequence, then that's a good thing. \015\012\015\012The next question is, did you have this system setup in a RAID Array and if so, what RAID co ... HP ProLiant ML370 G4 Server

Powers up but never goes to boot up screen


Be sure your hard drive is not dead. When you turn it on put your ear on the palmrest and listen for a small spin up noise. Then you should hear a light click sequence. If the hard drive is bad you wont hear that noise.Bad noise will be more unpleasa ... IBM ThinkPad T30 2366 Notebook

How to boot from cdrom


I believe you hit F10 key to enter bios. Go to the advanced menu and select boot options. You can select in there what order the computer tries to boot from different options. You need to select boot from CD and put it in sequence before the hard ... HP Compaq Evo n600c Notebook

Video hardware error


With another monitor uninstall anything related to your Sharp LCD, boot up a couple of times, then reinstalled as instructed.Hope That Helps! ... Compaq Presario 5000 PC Desktop

Cannot find primary drive 0 (C:) - Dell OptiPlex GX110 PC Desktop


Make sure the boot sequence is set to look for the hard drive first and also make sure that the hard drive is set to cable select and is the only hard drive on the IDE cable and is plugged into IDE slot 0 on the motherboard. ... Dell OptiPlex GX110 PC Desktop

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

Boot sequence / bios password issues with Acer Aspire 5100


Hoping you are using some version of windows OS. Go to safe mode... press the power button to boot and while booting keep pressing F8 which will allow you to go to safe mode and reboot the machine if you are able to sucessfully able to go to safe mod ... Acer TravelMate 2300 Notebook

My matser hd oin is aet to master. My slave is set


The first thing you need to do is edit the boot.ini filehttp://support.microsoft.com/kb/289022This will explain how to do that.This part is only a ... Symantec Norton Partition Magic-8.0 (10256717) for PC

Replaced the hard drive, won't reboot. give me blue screen- f1 to set-up, f10 system recovery. Does nothing.


During the boot sequence hit delete several time and the cmos setting will pop open, make sure your drive is recognized.set to auto detect and see if it finds it.make sure your drive jumpers are set to master or slave. for the new drive m ... HP PC Desktops

000021a error I'm getting the 0000021a error. I'm rtying to reload the OS but it doesn't recognize the CD/ROM even though the order is correct to go to it first. Tried to boot in safe mode and it's telling me I have a video driver error. Seems like a lot more than just that.


If your system does not boot, is due a:1) Order Bios (Put Cd at the first place)\015\0122) The CD used is not a bootable CDAre you using a bootable cd?Assuming your system is set to boot from the CD-ROM drive ... Dell Dimension 4600 PC Desktop

IBM 300PL Model: 6862-V20 Booting Sequence cleared problem


Boot in bios and reset the intrusion to read and clear it out alot of times the bios will use its backup when cleared clear the ir setting as weel and remove any passwords in the security setting in the bios if you are using a pov card you may have t ... IBM LENOVO VIDEO CARD 3D PRO 4210 00N3439 Graphic Card

New HDD Install Prob


Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

After booting process done. Screen goes blank and Keyboard not working only Mouse cursor is dispaly and working on the blank screen in My acer Laptop.


Try booting the system to Safe mode. To boot to safe mode:Restart\015\012the computer. As soon as the BIOS has finished loading, F8 key on your\015\012keyboard. When Windows Options menu appears, scroll to select the Safe\015 ... Acer Aspire 5610 Notebook

FATAL ERROR MESSAGE/DELL OPTIPLEX GX150 DESKTOP/WINDOWS XP PRO


It sounds like the system is not booting from the CD-ROM and therefore is repeatedly trying to use the same set of files it has already copied to the harddrive. Check the boot sequence in the BIOS and verify that it will boot from the CD-ROM before t ... Dell OptiPlex GX150 SF PC Desktop

This Acer AST 160 I'm working on crashed...


Computer stops at verifying dmi pool data.\015\012Issue:\015\012Computer stops at verifying dmi pool data.\015\012Cause:\015\012This issue can be caused by any of the below reasons.\015\012\015\012Corrupt boot files o ... Acer Aspire T160 (AST160UA3400) PC Desktop

Yea sorry, forgot that tid-bit of info. It,s the W3118 eMachine / Gateway FIC K8MC51G


This issue can be caused by any of the below reasons.-Corrupt boot files on the computer.-Settings for hard disk drive are not correct.-Floppy diskette or CD in computer causing issue.-Boot devices not set properl ... E-Machines eMachines Desktop PC

Restart after erasing hard drive


I had to nuke my HDD a few weeks ago and reinstall after I had a nasty virus attack on the Acer Aspire 3690. I experienced the exact same thing you did. The main problem I discoverd is that you need to change your MBR (master boot record) to "stand ... Acer Aspire 3690-2196 Notebook

Emergency Room: Code Blue


If its a very old game then it might still run on dos. dos is the old operating system. you could run two opperating sytems if you want to do that then read this that i found on runing two opperating sytems\015\012\015\012First you need t ... Legacy Interactive Emergency Room: Code Blue for Windows
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4744 seconds