Having problems with your PC Desktops ?

Can u possibly tell me where i might be able to download a schematic for an EMachine desktop computer model #T2742? It is out of warranty and was donated to our church and we need to know where to reconnect the main pwr switch wires and LED indicater (on/off) wires to the circuit boards ( 1 ea of red, white, blue).


Answers :

Hi dallasblue08,
\015\012
\015\012Here's a diagram of what your looking for:
\015\012
\015\012The following eMachine models share the same motherboard (and thus the same front panel layout):
T2742 T2796 T2798 T2824 T2885 D2823 T2862 T2896 T2898 T2958

284ecac.png

Hope this helps!
\015\012
\015\012Mark
Hi!
\015\012
\015\012Try this and see if it answers your questions. may at least give you an idea of what to do.
\015\012
http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm
\015\012

\015\012HERE ARE THE DIAGRAMS STRAIGHT FROM TECH SUPPORT, HOPE THEY HELP, PLZ POST ANYWHERE THERE NEEDED.. \015\012 \015\012http://e4allupgraders.info/dir3/phfilesz/manuals/l7vmm2.zip \015\012http://support.gateway.com/s/Checklists/BPC/ck2007050376.shtml \015\012 \015\012and yes the motherboards die when the power-supply does usually, they made them like this to make more money so ppl would have to either buy a new computer or new mother board and power supply which isin't much price difference, i went through several emachines lately same problem.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can u possibly tell me where i might be able to download a schematic for an EMachine desktop computer model #T2742? It is out of warranty and was donated to our church and we need to know where to reconnect the main pwr switch wires and LED indicater (on/off) wires to the circuit boards ( 1 ea of red, white, blue).


Hi dallasblue08,\015\012\015\012Here's a diagram of what your looking for:\015\012\015\012The following eMachine models share the same motherboard (and thus the same front panel layout):T2742 T2796 T2798 T2824 T288 ... PC Desktops

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

TRYING TO HOOK UP MU POWER BUTTON NEED TO KNOW


Hi there\015\012The front panel connectors are\015\012 mainly,\015\012\015\012\015\012\015\012\015\012harddisk activity connector\015\012power switch connector\015\012 ... eMachines T6420 PC Desktop

Had to remove the wiring harness connecting the front power button on my e machine. Wires are marked hdd/led(red&&white) power led(green&white) and power sw(black&white. Need to know where to reconnect. Tom


Check on motherboard you find some pins on corner of motherboard.Read carefully on motherboard you can read Hdd _LED , PWR_sw etc near those pins. ... PC Desktops

Power Switch trouble


Hi, I have seen this problem before and it was related to circuit failure, let us hope this is not the case! From your posting I understand that your computer won't turn on now. So the next step is to reseat the components inside the tower. \015\012\ ... HP Pavilion a450n PC Desktop

Installed an Upgrated Mother Brd,in my Hp Desktop Tower,but the power Switch receptacle in the New Mother Brd has 16 pns


You need to track the wires from the case front panel to thier locations: one will be your power switch, one your reset, one hard drive activity light, and one your power light. You want to note and label which light or switch they go to then go to t ... PC Desktops

Had to replace power switch on emachine computer need to know where wires go


I'd like you to look at this motherboard, and compare it to yours. It's an Intel Seabreeze T3 motherboard. My data states it was used in many computers, and the eMachines T3830 being one of them. ... E-Machines eMachines T3830 PC Desktop

I need a diagram for wiring a new power supply to a Gateway 509ge.


Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks


On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

My emachines T3828 will not power up. I changed the power supply, but that didn't help. my next suspect was the power switch. I found that the wires wer a little loose. Thinking that the power switch wires were one unit, I pulled them. Imagine my surprise when I saw that they wer actuall three seperate wires, One black and white, One blue and wdhite, and one red and white. I need to know how to reconnect them, and in which order. I also noticed that a green light comes on. I assume this is for t


Hello there,The green light on the motherboard is there to indicate that you are in fact getting power to the board, which is good. The wires you refer to are in fact the power switch, reset switch, and probably some type of ... E-Machines T2742 PC Desktop

Front panel leads Emachine model T2862


E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops

Where does the pwr sw plug go to on the motherboard


There is no way to tell you exactly where it goes without knowing the make and model of the motherboard. However all motherboard label the connection point on the board itself. What you are looking for is usually located in the lower right hand corne ... Gateway DX4200-09 PC Desktop

EMachine no power


Ok for a start the power switch is not green and white that is the power led, you need to look for a red and black wire normally marked on the connector and motherboard as pwrsw or pswitch.\015\012if you believe it to be the switch unplug the c ... E-Machines eMachines Desktop PC

My a730n will not turn on and the green led power light on the back is flashing


This indicates there is a problem with the Power Supply.You have a weak voltage power rail.Components inside the power supply have failed.Most of the time this due to the power supply, as well as the inside of the computer is ... HP Pavilion A730N (PJ510AA) PC Desktop

Removed monitor for cleaning


Unsoldered the master power switch and the reverse scan button (micro switchs) from the mother board and traded each others place, (the reverse scan switch into with the master power switchposition and vice versa.) Allowed the two confused wires to h ... Toshiba Satellite A135-S4427 Notebook

Motherboard pin config


All motherboards have a print beside the pins, \015\012Speaker= "speak", \015\012"pwr s" =powerswitch, "HDDled" red light on front, rst = reset switch [not allways used] "pwr led" Green led, the case wires are usualy marked on the plug ends with th ... Systemax Ascent PC Desktop

Wiring a P4M80-M4 mother board


You can download the manual for the motherboard here, just click on the "manual" link:http://www.biostar.com.tw/app/en-us/mb/driver.php?S_ID=246This will list the front panel connections, which are 2 pins. Each of the jumpers ... PC Desktops

Wiring internal board of labtec computer speakers


The shielded wires are for ground, so they get connected together. Plug the wire into the PC and run some music. Then touch each wire to the others. You only have a couple of combinations to try...red-to-green and white-to-yellow, or red-to-yellow an ... Labtec LCS 1040 Computer Speakers

Reconnecting power swith, LED light for power and hard drives on emachine


Yes that is true if you look at your wires ahnd you will see that one says hdd and one says spkr and so on now look closley at the board and you will see the same thing on the moboard if you are not abloe to read it you should be able to go ... E-Machines eMachines Desktop PC

Motherboard E210882 on Emachines Model W2888 pin configuration


Here is a link to the manual,It is in PDF format ... PC Desktops

No power and auxiliary power led on in orange


Could be a bad power supply, bad motherboard, bed device such as a disk drive dragging your system down, or a bad card plugged into the motherboard. Easiest thing is to remove devices such as PCI cards and hard drives one at a time to se ... Dell OptiPlex GX620 PC Desktop

Need to re-attach power button cable, hard drive


The manual for your computer is available from emachines, p.168 shows the info you need (replacing the front I/O panel)\015\012 ... E-Machines eMachines Desktop PC

Emachines t3830 I need the schematic for MB I umployed the wire for the push bottom without looking at the way they were plug. Now I do not know the correct aligning of the push bottom wires.


If you look at the motherboard there is usually a diagram labeled "FRONT PANEL HDR" that will tell you which pins are for: HDD LED, PWR LED, RESET, PWR ON. etc. The chart / diagram may be a few inches away from front panel header.the fol ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9081 seconds