Having problems with your PC Desktops ?

How to Factory reset Firebox X20e edge - PC Desktops


Answers :

To set the Firebox X Edge e-Series to the factory default settings:
\015\012
    \015\012
  1. Disconnect the power supply.
  2. \015\012
  3. Hold down the Reset button on the back of the Edge.
  4. \015\012
  5. Continue to hold down the Reset button, and connect the power supply.
  6. \015\012
  7. Hold down the Reset button. When the yellow Attn light stays lit, the Edge was successfully restored to the factory default settings.\015\012
    \015\012This process can take 45 seconds or more.
  8. \015\012
  9. Release the Reset button.
\015\012\015\012Do not try to connect to the Edge at this time. Before\015\012you can connect to the Edge, you must start it one more time. If you do\015\012not, when you try to connect to the Edge a web page appears with this\015\012message: Your WatchGuard Firebox X Edge is running from a backup copy of firmware. You could also see this message if the Reset button is stuck in the depressed position. If you continue to see this page, check the Reset button, and start the Edge again.
\015\012\015\012
    \015\012
  1. Disconnect the power supply.
  2. \015\012
  3. Connect the power supply again.\015\012
    \015\012
    \015\012The Power Indicator lights and your Edge is reset.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to Factory reset Firebox X20e edge - PC Desktops


To set the Firebox X Edge e-Series to the factory default settings:\015\012\015\012Disconnect the power supply.\015\012Hold down the Reset button on the back of the Edge.\015\012 ... PC Desktops

Left hand Edge distortion on screen.


Change monitor frequancy from grafics properties\015\012only 60 Hz ... Dell P793 17" CRT Monitor

Dell Optiplex GX260 desktop-how to reset factory settings in BIOS


Sir try to remove the pill battery its in the inside of ur box that return it that might give an error said that u shud configure again ur time and date but that is easy but taht will increase teh speed and gives a reset to full factory defaults ... Dell OptiPlex GX260 PC Desktop

Dell latitude d620 needs factory restore


Resetting\012 a Latitude D620 laptop to the factory settings allows the \012user to restore the Latitude D620 to the original operating condition as\012 if it was just \012taken out of the box. Dell system includes a restore utilit ... Dell Latitude D620 Notebook

I have a dell 4600 that I got from my daughter . which I had to re-install and It has a password in the bios for the set up and my daughter dont know


\015\012 \015\012Hi katmbutts;\015\012 \015\012 \015\012Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware ... Dell Dimension 4600 PC Desktop

Compaq FP 5315 Moniter


Have you checked the computer bios?\015\012\015\012 \015\012\015\012In case an item was changed in the BIOS, such as the primary display device setting, use the following steps to reset the BIOS back to its default configuration:\0 ... HP Compaq FP5315 15" LCD Monitor

Rebbot to factory settings - PC Desktops


Hi bgreenejr,\015\012 \015\012Are you referring to the BIOS or OS? \015\012 \015\012If you’re referring to the BIOS settings, you can do this by accessing it and ... PC Desktops

Dell UltraScan P1110 flat-screen monitor BLURRY?


The button you pressed is the reset button and according to the documentaton "returns the monitor to factory defaults".\015\012\015\012Here's a link to the Dell support page for your monitor:\015\012\015\012 ... Computer Monitors

I have a black border on top of my screen


There are two things which could have caused this. One, the Monitor settings have changed or the computers display settings have changed.\015\012\015\0121. Resetting the monitor to default.Push the 'MENU' button to ope ... Dell E153FP 15" LCD Monitor

Emachine laptop D620: reset password after system restored


Insert OS cd in drive and start reinstalling by selecting repair mode\015\012now once all files are loaded system will reboot when you see the Installing Devices progress bar, press SHIFT + F10this will give you access to your acc ... eMachines M6811 Notebook

I lost one of the recovery disc..how to get another one...


If u have OS installed on hard drive there is a separate partition on hard drive that hold OS files in a safe place in case u lose ur recovery disk u can get ur system reset to Factory Default without recovery disk if u want to factory re ... PC Laptops

Computer will not boot to desktop


I) u said that your computer is going to safe mode menu, if it is really goes to safe mode, then try to click the safe mode option and see whether ur able to go onto the screen or desktop       (or) ... HP Media Center m1180n PC Desktop

We r having a problem with a software we purchased from shockwave. The game is called saints and sinners bowling The graphics flash and when u roll the ball u only c the result u don't c the ball rolling down the lane. My computer is far less advanced that my dads computer and this game works fine on mine. One other thing, is the game works fine for several hours after I reset the computer then lets say when I shut the game off for a few hours it does the same thing. I have thought about resetti


Hello, Jason.If your problem began after Windows XP SP3 was installed, I'd suggest using System Restore to roll back your system to an earlier time. Go to Start - Programs - Accessories - System Restore.You had mentioned Facto ... Gateway GM5088 PC Desktop

My emachines EL 1200 desktop stopped working during bad storm


You can try to reset the computer by removing all power sources and letting it sit for a time. Then powering it back up and see what happens. That's called a hard reset. \015\012I am guessing that the storm surge damaged your motherbo ... PC Desktops

Blue screen when I close the top of my laptop or shut it off


This error relates to video drivers. to fix this. restart your computer and as soon as you see dell keep tapping the F8 key in the top row to get advanced boot options. and then select "Enable VGA Mode" and press enter 2 times. then the computer shou ... Dell Inspiron 6400 Notebook

Problems with Dell Inspiron 530s Desktop Computer how do i reset


You dont have to factory reset it, if the PC was performing ok before, you can simply restore to previous settings. ... Dell Inspiron 530s Desktop Computer

I want to restore my neighbor's Mirus Desktop; and via MS Recovery Console: diskpart I see a 6.25 gig-byte hidden partition; and I assume this is the restore partition. What keyboard key combination at Boot-Up do I use to restore this system to Original Factory Setup? -chris Note: This is an AMD Sempron 3000+; but it runs at 1.8 Gia-Hertz as opposed to the 1.6 GHz choice I picked below.. which seemed to be the closest match I can find.


#1: Shut down your computer. You must first shut your computer down to\015\012initiate the factory restore.\015\012\015\012#2: Start up your computer and as the computer logo appears (such as Dell or\015\012HP) hit "Ctrl>F11" simultaneously. This ... AMD Sempron 3000+, 1.6 Ghz (SDA3000AIO2BA) Processor

Evo d500 desktop


There are a few programs out that can be used to reset xp and vista passwords but most are corporate software like bestbuy has MRI software that can reset or you can call HP and order recovery software approx 20 bucks ... Compaq Evo D500 PC Desktop

Reset bios to factory settings in dell optiplex gx520


Hi,\015\012\015\012The BIOS password may be cleared from a Dell Optiplex by removing the password jumper (PSWD) from the motherboard.\015\012Can click the link below to see how its done or follow the steps below :--\015\012 ... PC Desktops

Cannot get into belkin load program to change password and code


If what you are referring to is a Belkin Wireless Router you may need to login from the Internet Explorer browser and type in the IP address of the router. Typical routers are set to 192.168.1.1 but if this does not work for yours you may need to do ... Belkin PC Desktops

I install xp on toshiba satellite l300 psl pgl but becames slow


Its hard to do if you dont have OS or recovery disk to reset as factory settings.by the way, if your computer still runs (but slowly) then you can clean up all just to make it faster.for it:reboot your PC and keep holding F8 u ... Toshiba Satellite Pro L300 Notebook

Hi I have a netopia 3341 router DSL with ethernet hookup and a linksys wrk54g wireless g. When I hook up my desktop it has XP on it, I get nothing. The linksys was given to me and worked at its previous location. I tried getting the laptop to work too but it says it gets no signal. I think its something with the isp address but dont know how to go about setting it right. If you could explain I would appreciate it. Thanks


Ok so the wireless router you got given, was that simply unplugged from it's previous home and then plugged in at yours? In order for it to work (to connect your pc) it will need to be reset back to factory and then reconfigured..It shou ... PC Desktops

How do I reset bios on emachine d3415 - E-Machines eMachines Desktop PC


When you say reset...do you mean that you want to restore the bios back to their original factory settings?  \015\012\015\012That can usually be done from the bios (reboot, press either F2 or F10...the screen that displays upon boot will l ... E-Machines eMachines Desktop PC

Reset factory settings


If you don't have the original recovery disks that came with the computer, and it is still under warranty, than I would call Dell, and ask for the recovery CD's for that particular computer. Either that or you must buy a new operating system disk, in ... Dell Inspiron 531s Desktop Computer

I just got a Zyxel Prestige 660HW-61 model # 401315, and at first it would connect to my desktop, but the wireless would not connect on my laptop. I contacted my DSL provider, who also provided me with the router, and they said it was a glitch. Today they told me to shut the router off and turn it back on because the problem was resolved. After I shut the router off and turned it back on I could no longer connect to my desktop and the connection showed up on my laptop as lockon and is now unsecu


Try reseting the prestige, theres a reset button in the back, hold it down for 30seconds it will restore the zyxel to factory defaults and it should work instantly.\015\012\015\012\015\012you can find the user manual from here ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3778 seconds