Having problems with your PC Desktops ?

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.

Answers :

Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:

* Off entirely.
* Switched on, plugged into a computer but no video signal being received - usually displays "analog power save mode" or "digital power save mode" for a few seconds, then blanks. Comes back to life the moment a video signal is received. This state is the default in full power saving mode.
* Switched on, not plugged into a computer. Some monitors don't display anything, some go into power saving mode, some fly "CHECK SIGNAL CABLE" or a similar message around the screen. Picture is restored when the signal cable is plugged back into the computer
* On fully, receiving an image, and displaying.

Hope this helps.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.

Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

When I turn my computer on the monitor stays off. I press the monitor's power button and the orange light above it goes off, obviously turning it off. I press it again and the light turns blue, the words "Analog Power Saving Mode" coming up on the screen. A few seconds after, the screen goes black and the light turns orange again.

Or just plug the video lead into the onboard connection (vga) if that doesnt work try hitting f1 when your pc is loading as sometimes the bios may be set to run in pci (graphics card) but will tell you at startup to press f1 to continue but you wont ... LG Flatron L1750S 17" LCD Monitor

Monitor shuts off during boot. Let the machine boot full up, hit the power button, the monitor flashes windows for a split second, and goes back to power saving mode

Hey there Celius,Chances are the 'Refresh Rate' somehow got set too high for the monitor. On flatscreens , the result is a black screen.If you have an old monitor (crt type) hook that up temporarily and reboot.\015\012 ... LG Computer Monitors

Gateway monitor FPD1975W won't display

Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor


Hello, Sorry to hear that you are having problems with your monitor. While the monitor is turned on and plugged up to your computer system, try looking very closely at sharp angles from above, if you can barely see your desktop the problem is ... Chi Mei Corporation CMV-T39D Monitor

My monitor shuts down after one second. - Dell Dimension 3100 PC Desktop

Dell monitors automatically go into power-save mode after a preset\015\012amount of time when the computer is inactive. The Dell monitor will go\015\012completely black, instead of showing a screensaver. This doesn't mean\015\012that your ... Dell Dimension 3100 PC Desktop

No picture on monitor 997M

One reason that this is happening could be that it is on Power saving mode. This happens when the LCD monitor detecs an incorrect timing then thats the time that the LCD goes blank and the power botton starts to blink.\015\012\015\012what ... Microtech Computer Monitors

3yr old got ahold of monitor

Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Lg monitor won't come on

Try connecting the LG monitor to the VGA port on the HP tablet instead on the docking station. ... LG L1920P 19" LCD Monitor

I have a samsung 15 inch LCD TV. When I turn the

Kcs36dd, Lcd TV's also have, just like LCD monitors, an AC to DC voltage power supply. It is called a "switch-mode-power-supply" and generates the DC voltages required for all the other important electronic circuits inside the unit. 98% of all 14" to ... Samsung 153b-sliver (Silver) 15 in. Flat Panel LCD Monitor

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv

Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen

The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

My LG flatiron W1943TB turns on, says analog power saving mode, goes black and then the power button flashes.. but the monitor is hooked up to my dell notebook bc my LCD died

Hi erin mckinle,\015\012\015\012That is probably it's, uh, analog power saving mode. When the screen goes black and the power button flashes, make some mouse gestures or hit some keys that would not affect anything (try spacebar). That should b ... LG W1934S-BN 19" Monitor

I only get power saving mode on my screen then screen goes black

Inside the power pack is a pulse IC chip they fail and cause all kinds of havoc also caps can cause issues unaccounted for, I would start at replacement of the IC about 2 dollars on E bay, and replace any bad capacitors you can see, they look domed o ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Dell monitor dialog box says monitor is in the power save mode

Actually, it most likely is not the monitor which is in "power save mode", it is the computer itself.\015\012\015\012When you cannot get a computer out of "power save mode" by any other means, typically the cause is that ... Dell Dimension 2400 PC Desktop

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?

Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Analog Power Saving Mode Problem!

Have you checked you power saving options in Control panel. If this is a desktop, unless you are a energy miser, I would change your power saving options to never on all options, turn off hibernation and suspension for when you are playing game ... LG 22" FLATRON LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz

Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Screen went black

When you close the lid, there is a small pin that engages the case and flips a switch to tell the laptop the case has been closed. The monitor will ALWAYS turn off then, because otherwise, the heat build up would burn the screen! Do not try to defeat ... Dell Inspiron 710m Notebook

Problem w/Dell E176FPf monitor stuck in power save mode

Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

E manchine e17tg turn on power you get just a

Mrmadgbull, How long will e17tg display the WIN-desktop before it goes to BLACK screen? Is it 1, 2 ...4, 5.....20 seconds? How old is unit? Does unit have internal ac to dc SMPS or external (lay on floor) SMPS? Did problem occur suddenly? What do yo ... E-Machines E17T 17" Flat Panel LCD Monitor

LG Flatron W2252TQ Monitor stuck in digital power saving mode

Raymond, (did) you solve the problem?i've got exactly the same problem and i've read more similar complaints on the internetgriris ... LG W2252TQ Monitor

Screen stays blank

I'm seeing the same problem as the original poster. that delaying the power-on helps, seems to be related to the video mode - it fails in the vga text mode the bios boots up with, but works fine with the later activated graphics mode. switching to te ... iiyama Vision Master Pro 450 Monitor

When the PC starts the monitor does not come out of the power standby mode

Hi The problem is to do with a 680uf capacitor that tends to bulge and fails.this stops the monitor staying on when trigerd to do so,change this and happy day. ... LG Flatron L1715S 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8767 seconds