Having problems with your PC Desktops ?

Need jumper settings for a Maxtor model 94098u8 hard drive

Answers :

Here are your jumper settings.If this solves your problem please rate as fixed. If tou need more help just add a comment and I'll be glad to help you further. Thanks.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell Dimension 2400 - Adding second HD

I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

New larger hard drive can only be detected as Primary Slave

Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

Old HD to a "new" PC

I had the same problem hector, I don't know if you figured it out yet, but you can't have a hard drive and an optical drive (dvd/cd/ect..) on the same IDE cable. It just won't work, the only explanation I've heard that made much sense to me was that ... Gateway GT5408 PC Desktop

Hi this bhaskar here i have IBM think pad but in swiched on message is enter pass word


Hi i have a 10.1gb Maxtor model 31024H1 IDE hard drive and i need the jumper setting for slave

Slave is NO jumpers at all \015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012(Master) - The vertical jumper over the J50 pins is configuring the drive as a Master. The horizontal jumper over the J48 and J46 pins ... PC Desktops

Drive failed to boot up next time it was turned on have tried conncting as a slave computer recognises drive but say its 138mg when its 40gig, and there is nothing showing on the drive! have tired running Seatools for windows and all the test say there are no problems with the drive. I have in stall a nerw 250gig drive (Seagate) with NTFS file system and the problem one is a Maxtor with fat file system .

Hi silverend,I have some questions and some recommendations for you...The original problem of the system not booting might have been temporarily compounded by moving it to a different system as a secondary or slave disk. You' ... PC Desktops

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory

I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

Swap two hard drives

Jumpers on disk drives are the little plastic squares fitted over metal pegs back near where the IDE connection is made on the drive. Sometimes, an abscence of a jumper implies a certain setting. To change the jumper settings, you physically move t ... IBM ThinkPad T22 2647 Notebook

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below

Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

How do I change jumper settings on Maxtor hard drive, model: 51024h2, hda: 02a, pcba: 61a?

Hello,\015\012\015\012Here's the manual for your drive.\015\012\015\012http:// ... PC Desktops

Maxtor 120gbyte diamond drive appears to only have 32gbytes reformat?

Ok, the Jumper settings would have zero affect on the drive reading properly. The bios can have an affect if the settings in the Bios are set to only read a portion of the drive itself. Most standard set ups in the Bios are AUTO, which means they aut ... E-Machines eMachines Desktop PC

Transfer data from Dinension hard drive to XPS hard drive

If you have no experience with this, it might be easier to just copy the data from your Dimension to a external usb harddisk and then to the XPS. But i will try to explain it.I've looked a bit around: your XPS hard drive is a SATA drive, ... Dell Dimension 4600 PC Desktop

Jumper settings for a Maxtor Model 52049U4 internal hard drive

Look on the label on the drive itself ... PC Desktops

Have maxtor 40gb hd want to add 2nd WD hd in DEll dim8200

(if both drives on the same cable):\015\012 Your boot drive goes at the end of the primary data cable.\015\012Your second drive goes on the middle connection of the same cable.\015\012 The red stripe on the data cable needs to be c ... Dell Dimension PC Desktop

Toshiba 5205-s503 won't start up

In my 15 year career in electronics, among other companies, I have most notably worked for United Technologies as Test Engineering Technician and as an Electronic Failure Analysis Technician for Jabil (Circuit.) I am unemployed due to US electronics ... Toshiba Satellite 5205-S503 Notebook

2nd hdd how do i install a 2nd hard drive in the ultrabay 2000.i bought a hdd caddy for the ultrabay and put a 20 gig hdd in for extra storage.but when i turned my laptop on it wouldnt bootup. said operating system not found etc. what do i do?i have a ibm a31 i have a t21 2647-47u thinkpad with ultrabay i am trying to install the 2nd hdd. can you tell me the jumper setting for the 2nd hdd device 0 device1 or cable sel.thanks for any help you give

Both hard drives will need to be jumpered to a master and a slave or both have to be jumpered to cable select. normally the jumper setting are either on the label of the drives or are marked on the bottom of the drives near the jumper drives. if th ... IBM ThinkPad T21 Notebook

What kind of hard drive do I need for an acer aspire 4315? From what I have found it needs to be 68 pin, is there anything else? I have replaced a few hard drives and this is an easy fix (much easier than digging into my Thinkpad and replacing the power jack!!). I am just not familiar with this model, she brought it over with her from the Phillipines.

A hard drive with 68 pins is a wide SCSI-3 hard drive device.\015\012SCSI drives need a SCSI controller (eg in this case an Adaptec SCSI-3 controller) and the SCSI ID of each hard drive can be set from 0 to 7. The ID setting on the hard drive i ... Acer PC Laptops

What hard drive will work with my NEC PowerMate 5250?

You would need to get the manual for this computer as the manual should state in it what type of hard drive it supports in terms of capacity and what connector types it needs ie IDE or SATA ?Also are there any bios updates for this comput ... NEC PowerMate 5250 PC Desktop

I have a maxtor 6L080M0 hard drive that has crashed The return code is 7 Is there any way to fix this problem.

If the following determines you have hard drive failure then you may have to purchase a new HD. Follow what is recommended from the manufacturer below. READ EVERYTHING.\015\012\015\012According to Seagate the makers of Maxtor, you have a ... PC Desktops

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Hard drive problem

Although I covered most of the ways to speed up Windows boot time in another article, I encountered a unique roadblock recently that made me write this article. During the last week I was asked by a customer to upgrade one of their office ... PC Desktops

I own a maxtor hard drive model 92041u4 and I need the jumper settings. It is a master

Http://eshop.macsales.com/Tech/manuals/idehdsettings/Maxtor72.pdf\015\012here is the manual for the jumper settings ... PC Desktops

Need jumper settings for a Maxtor model 94098u8 hard drive

Here are your jumper settings.If this solves your problem please rate as fixed. If tou need more help just add a comment and I'll be glad to help you further. Thanks.\015\012 ... PC Desktops

Dell Latitude D600 with new Hitachi 30GB Drive Not Recognizing

XP install is not detecting any hard disk.\015\012No jumpers are required for laptops, can only have one hard drive in a laptop.\015\012Check the BIOS for the hard disk configuration, make sure that it is set on Auto (detect).\015\0 ... Dell Latitude D600 Notebook

Frezes at verifying DMI settings. Already changed MB and Power supply. Lan connection only flashes green once in a while should be constant. Tried on a working terminal and does the same.

The Desktop Management Interface (DMI) is a newmethod of managing computers in an enterprise. Themain component of DMI is the Management InformationFormat Database, or MIFD (the DMI Pool Data). Thisdatabase contains all ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0033 seconds