Having problems with your PC Desktops ?

Installed new equipment, now monitor is blank

\015 Recently bought a new mobo, vid card, cpu, fan, and ram to upgrade my computer. I installed everything , switched it on and got a blank screen on my monitor. I have checked everything I can check and it works out fine. The monitor works with other computers and everything else seems to be powering up correctly but I still get nothing but a blank screen when i turn it on. My mobo has integrated video and I also bought a graphics card, and I get the same thing with each. I thought it might be a faulty mobo or I zapped it so I sent it back, got a replacement and the same thing is happining. I also bought another mobo thinking it might just be that and I am still haveing the same problems. As far as I know everything is compatible with each other and there is enough power getting to everything to power everything up, however I have begun to suspect that it might be my CPU. I had just the CPU, fan, ram, and speakers plugged in (also had the monitor plugged directly into the mobo) and I tried to run it then, hoping to get anything on the screen. Still nothing. It remains blank (like if the power was off) the entire time. Also, I am not getting any beeps from it either. So does that mean that something is wrong with the CPU? I have checked the connections on everything more times then I can count so I know everything is plugged in the way it is supposed to be. I even tried unplugging the RAM to see if I could get an error beep or anything, and still nothing, so I'm at a loss here. Also, I just bought a brand new PSU. I have tried it on both mobos with the same results. I'm going to list my specs below, any insites anyone has that can help would be greatly appreciated.PSU: 650WMOBO: Biostar MCP6P-M2 (website: Biostar MCP6P-M2 - motherboard - micro ATX - GeForce 6150 - Socket AM2)CPU: AMD Athlon 64 X2 5000+ Socket AM2Video Car: GeForce 9500 GTRAM: 2G DDR 2 667 MHz\015

Answers :

Just dump everything and buy a branded new PC....
\015\012u will be increasing ur BP....it;s not worth this much effort....
\015\012the kind of work u have done...it seems ur an expert so u urself work it out what's wrong...and where did u make a mistake...
\015\012
\015\012i guess ur CPU and MB are not getting along....some issue with ur integration.....of all parts....
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Installed new equipment, now monitor is blank


Just dump everything and buy a branded new PC....\015\012u will be increasing ur BP....it;s not worth this much effort....\015\012the kind of work u have done...it seems ur an expert so u urself work it out what's wrong...and where did u ... PC Desktops

What driver do i need for my acer desktop monitor


It will most likely not be the monitor at fault, but the video card in your computer.\015\012\015\012If your monitor is working like a monitor should, then it is a bit of technically dumb equipment. It can only do what the video card tell ... PC Desktops

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

New HDD Install Prob


Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Display Problems I have tried to install a new PCI video card and cannot get it to work. The card is an Nvidia GeForce FX 5200 with 256mb of Ram. I have tried all 3 PCI slots, but the screen remains blank, though the PC appears to start up as normal. I have both uninstalled and disabled the onboard Intel graphics, but unless I plug the monitor back into the onboard serial connector - the display remains blank. I am running the original CRT Dell Monitor. Does anyone have a solution or is my mothe


Enable your onboard graphics and plug your monitor into the onboard. start up your pc and install any needed drivers for the secondary graphics card. right click on your desktop and go to your display properties you should see a faded out screen that ... Dell Dimension 2350 PC Desktop

Want to install new WD hard drive into my old computer


You say you see data on disks on your existing system, yet they appear blank when trying to install? Please try to dig a little deeper and find your setup file. Data wouldn't disappear unless your running NTFS now and the disks are FAT. ... Sony VAIO PCV-RX450DS PC Desktop

Blank monitor after installing new video card


One thing you can try is to go into the Bios and load the default Bios settings. Sometimes that helps in reassigning interrupts and I/O addresses with new hardware. ... Dell Precision 380n (380TNMIN) PC Desktop

Dell LCD Monitor


Maybe your new monitor cant handle the resolution settings your old monitor was using, try installing your old monitor, or one you know can use the setting you have defaulted, then lower the resolution, and then try the new one again, or boot the new ... Computer Monitors

No' it's not powering up at all now, can you help' after changinng ac-adapter & battery


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

Acer will not boot up even with it being plugged in, no lights, noise, nothing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5100 Notebook

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook

My Toshiba Satellite 2415-S205 is dead as door nail, no lights, etc. I checked power supply, power jack and connection on board, all is OK. Now what, send into the shop for repair? Ted


Here are some suggestions I compiled, some you have done, thought I would throw it out there for you...\015\012\015\012 ... Toshiba Satellite 2415-S205 Notebook

My on button just blinks on and off but when I push it to turn it on..nothing happens..its like it isnt getting any connection


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5520-5908 Notebook

Dell latitude d500 had a power socket problem, but now resolved pc will not boot-up, drive spins-up, then nothing, completely dead display i think most likely scenario is mobo is fried, but open to suggestions how tio get this working again


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Latitude D500 Notebook

Whilst in use went completly dead canot resart


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Pavilion dv6000z Notebook

The screen is not going on all that shows up is a black screen with a white slash mark flasing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Inspiron 2200 Notebook

I have power out of adapter but laptop is completely dead; no lights come on at all.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Toshiba Satellite A45-S150 Notebook

My acer travel mate 5710 just blipped and closed down. NOw will not even switch on. any advice how to fix? The green power light does show for one half second when I press the button but does not function to 'on' mode.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

My loptop is an Averatec 7100. How can I test the motherboard? I took it to a computer repair shop and they said is the motherboard, I want to know how can I test it on my own.


This is more of a system diagnosis that an actual motherboard testing procedure, but since all components attach to the motherboard in one way or another it could count as a prcess of elimination......\015\012\015\012 ... PC Desktops

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

I do not my computers oprated - PC Desktops


Hi,\015\012 You have easily operate your computer. The steps given below....\015\012\015\012Materials Needed: \015\012- CPU- keyboard- monitor- mouse- speakers- printer- Operating S ... PC Desktops

LG f700b raster problem


If the lines are slanted, you are seeing 'retrace' of the horizontal sweep.\015\012The distortion at the top is probably caused by a failing electrolytic capacitor in the vertical deflection circuit or in the power supply filtering for that circuit.\ ... LG Flatron F700B 17" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7257 seconds