Having problems with your PC Desktops ?
Scsi disk only working at 34mbps
\015 Its an ultra 320 hooked into an ultra 2 lvd/se card the card can work at 80mbps and the drive at 320 so why is it only working at 34 i have windows xp 64bit installed and ideas to get the full 80??\015
You may never acheive the full bus speed as most manufacturers have a habit of giving their specs a little tweak and most mainboards may have conservative bus speeds too.\015\012You also have electrical losses in cables, low bus speeds and slower read/write speeds.\015\012Most people have at least 2.5 gig internet access speed but they will never reach that speed, most can only get as high as 50 or 60 meg due to cable losses and other restrictions.\015\012you may also have component issues which may be slowing things down too.. but to be honest, if you can get to about half what the specs tell you, you have done well..
Repair Help & Product Troubleshooting for PC Desktops
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Would a SCSI disk and a IDE disk work together?
This solution works on WIN98 and I don?t see a reason why it wont work on you\015\012If there is something that you were missing you might want to check with anther expert. This solution is a little complex so I hope ill be able to explain it well en ... Cybertron Intel Pentium 4 2.66GHz Serial ATA RAID Server / 512 MB DDR400 / 2x 80GB Drives (TPCSERP42600I)
Scsi disk only working at 34mbps
You may never acheive the full bus speed as most manufacturers have a habit of giving their specs a little tweak and most mainboards may have conservative bus speeds too.\015\012You also have electrical losses in cables, low bus speeds and slower rea ... PC Desktops
Just got new PC. Need to install High-speed scanner (Canon DR-5080C SCSI). Installed SCSI card, booted up, Windows XP detected new hardware, wizard couldn't find driver even on the mfgrs OEM setup disk. Downloaded therightdriver.exe file from Canon, expanded it, pointed wizard to it, couldn't find driver. Device Manager says device is working properly, it just doesn't have a driver. Installation from OEM Setup file appears to work (shows no errors), but still no driver. Readme on OEM disk
Did install the drivers for the SCSI card itself? Not sure what system you are using .. need more info. ... PC Desktops
Poweredge 1800 server
Hey,I looked over the spesifications for the poweredge 1800 servers, go ahead, it will work perfectly but there is one problem in the windows XP setup, you will need to insert / load SCSI or SATA drivers for the hard drive With a floppy d ... Dell PowerEdge 1800 Server
Xw 8200 workstation no work, red light and beeping
Check this link regarding the beep ... HP xw8200 PC Desktop
Highest Priority Problem: HDD moved from old machine works but is physically damaged . Trying to clone/ recover using DataLifeguard and Acronis. Been trying for days and always fails although the damaged drive will still start windows. The bios is showing my SCSI as primary and HDD or DVD as secondary depending on jumper config but it will still boot to drive not showing in bios. I finally got it to boot with DVD removed and old/new HDD on IDE cable (showing SCSI (with no MBR) as master and slav
If the hard drive is physically damaged , that means that hard drive motor has blown, or that drive heads are broken.\015\012\015\012In that case you cannot use such software as DataLifeguard and Acronis, and you risk that your SC ... IBM eserver xSeries 232 8668
How to install Adaptec SCSI driver when installing XP -Z Pro 6223
You have to use sata xp cd to intall that driver no need floppy disk. ... IBM IntelliStation Z Pro 6221 PC Desktop
I took out all my my old SCSI drives and put in 4 new ones. Now I can't do anything!
I had the same problem.There is a cd that came with the server called "IBM RAID Support" that is a must have to reconfigure the hard drives.It took me a week to find the ISO image.I will upload the cd via FTP and send you the link. ... IBM Netfinity 5500 M20 4RY (86624RY) Server
While Booting My Desk top Precision 360 of DELL.I have SeagateST373453LW SCSI Hard disk.At start up disk is recognised but capacity is not. If I am Verifying or Formatting my drive throug Ctrl/A for configuration utility, It go on formatting till 5 hrs it does not end. And the problem persists.
There are a couple of things here..First I am going to assume this is the LSI card that came with the Dell.1. Since it is a RAID card, the formatting you are seeing may be referring to the RAID structure. Does the configurat ... Dell Precision 360 PC Desktop
Seagate freeagentGo does not work with windows server 2003
Symptoms The problem I encountered after connecting the drive to the eSATA card was the following error in the Windows System event log: Source: DiskEvent ID: 7Description: The device, DeviceHarddisk2, has a bad block. At firs ... PC Desktops
I can't make the SCSI raid matrix on my Hp XW8200 to work
What about the cable connection is it one? ... HPHEWLETTPACKARD Refurbished HP XW8200 XEON 2.8GHZ 1GB DDR2 400 250GB SATA CD NVS280 XP PRO HPHEWLET... (C52468999BFM2) PC Desktop
MY DELL LAPTOP READS A DISK ERROR OCCURRED - Dell PC Laptops
I think it may say a little more than that but its a good clue to start with.\015\012\015\012If you can manage to boot into windows then run "CHKDSK /f /r"\015\012\015\012find the RUN command from the start menu and in the box ... Dell PC Laptops
Does not see hard drive
Configure the bios settings, hdd should be scsi. maybe your current settings is sata or ide. if not work check the scsi controller if have installed driver or compatible to your unit. ... IBM IntelliStation Z Pro 6223-31U PC Desktop
Connect ide or sata drives to a dell poweredge 2600 for additional storage
Yes and No.. \015\012\015\012The standard machine only allows SCSI, (no IDE or SATA or SAS connectors...\015\012\015\012However SCSI drives are not cheap.. so\015\012\015\012To overcome the power issue (you will no ... Dell PowerEdge 2600 Server
Installing a Seagate Dive into an Armada M700
Here at my shop I have run into this exact same problem on several P3 Compaq's and a few Toshiba's. I found that some of these machines, not all, but some, will not accept the 5400RPM drive, but will take the 4200RPM drive just fine. It's just ... Compaq Armada M700 Notebook
Cd dvd drive will read but wont write
This could be due to a common issue. I would suggest you try this method first.The following is a link to the Microsoft documented solution for issues with DVD/CD drives, explaining a step-by-step procedure. In the event that the first pr ... Dell Dimension C521 PC Desktop
Pioneer dvd-rw dvr-k17 problem
I had the same problem, it occurred right after windows installed sp2 and my laptop showed no dvd player with any program, I restored my laptop to the previous day before the update and it worked fine again, after that I just let windows update by it ... PC Laptops
My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.
Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops
Hot keys are not working on my Asus laptop - PC Desktops
Http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspxThis is because of The Human Interface Device (HID) is not configured to wake the computer when you press a key on the keyboard or mouse.RESOLUTION ... PC Desktops
Install XP on SCSI HDD - Instellistation Z Pro 6223-CTO
Have you tried putting the drivers on a flash drive.\015\012\015\012It is a method I have used to get drivers into the windows install.\015\012Try it with the "press F6 to install drivers" during the text setup phase bu ... PC Desktops
Dead 6300 poweredge
... Dell PowerEdge 6300 Server
Just purchased IBM Intelistation 6221..installing windows????
Hi!\015\012try this. reboot your cpu, then press the CMOS setup key (del), then select load default setting, then go to hard disk detection settings, select the LBA setup. I believe you know how to manipulate the CMOS setup configuration. if still do ... IBM IntelliStation Z Pro 6221 PC Desktop
Hi i formatted my sata hard drive and now my laptop will not reconignize it is there any thing i cando about this sata raid control drivers or something? gateway modle# MX8715
It is almost impossible to downgrade from Vista to XP unless you have the Business or Ultimate version of Vista. \015\012From what I understand the first thing you should have done is If the system has SATA (Serial ATA) hard drive, locate the d ... PC Desktops
Have a HP DV9500 laptop and I am trying to remove Windows Vista and install windows xp. When I get to the blue screen to start the install it says it can not locate my hard drive and the only option available is to quit the install. Is there some kind of protection on the hard drive?
Hi.\015\012\015\012I will explain you the issue.\015\012\015\012The notebook is preinstalled with a SATA hard drive which needs seperate drivers to be installed inorder to get the hard drive detected. The drivers for the SATA ... PC Desktops
Boot sequence manual - PC Desktops
When you hit the power button on your computer a whole lot of stuff\015\012happens. We call this the boot process. In the days when I first\015\012started using computers there was literally a "boot disk", a floppy\015\012(5.25" not a 3.5") disk that ... PC Desktops