Having problems with your PC Desktops ?

Need to set Samsung HD080HJ/P as slave, what pins do I need to jump


Answers :

Hi
\015\012
\015\012remove all the jumpers then it will work as slave
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

Have rs480m motherboard need the 2pin sequence to hook up the hard drive ''e-machine t6520''


I assume you are looking to connect another hard drive in your computer.\015\012Most desktop computers have two IDE controllers.\015\012The 1st controller will have the "C" drive set to Master (MA) and there maybe another drive CD or DVD ... E-Machines T6520 PC Desktop

Need to set Samsung HD080HJ/P as slave, what pins do I need to jump


Hi\015\012\015\012remove all the jumpers then it will work as slave ... PC Desktops

I nee to reset a jumper on my new dvd burner.But don't see what I am looking for


On the back of the drive, you can see a set of jumpers next to the IDE connector, You should see a jumper already there. From the right, the first 2 pins are for the master drive (MA), the next 2 pins are for the Slave (SL) settings, and the 3rd set ... PC Desktops

How do you set a samsung ide hd to master mode


Hello arrowllc\015\012\015\012That will depend on (1) the model hard disk drive (HDD) and (2) whether or not the HDD is the only drive on that IDE channel.\015\012\015\012If you'd still l ... PC Desktops

Emachine ET1331G-03w Documentation


Hi there,To install an IDE CD rom, you will need to open your computer and you will see an IDE Slot, your computer usually has two of them either directly next to each other or under each other, there is usually one white one and one blue ... E-Machines eMachines Desktop PC

How to install a second dvd player in my compaq


The computer needs to be opened up to properly install the CD or DVD drive into the computer. The method for opening the case will vary depending upon the case. Most new systems will use a panel or door on the side of the system while older systems m ... Compaq PC Desktops

My Samsung LCD TV/Computer Monitor just went deadOnly 14pins/15


It sounds to me like the monitor/TV needs to either be replaced or sent in for repair but there are a few things we can test. \015\012\015\012The first thing would be to set the TV to connect a cable line to the TV and see if you can get ... Samsung SyncMaster 204B 20.1" LCD Monitor

I have a dell 4600 that I got from my daughter . which I had to re-install and It has a password in the bios for the set up and my daughter dont know


\015\012 \015\012Hi katmbutts;\015\012 \015\012 \015\012Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware ... Dell Dimension 4600 PC Desktop

I want to put in an additional dvd-rom drive in my desktop in the expansion slot. Do I need software for this. I have a Phillips dvd-rom drive from my old desktop..year 2005? thanks


Windows xp vista or W7 should auto install any drivers needed for DVD/CD playersthe one thing you will need to, if you keep your existing drive when adding the additional drive is set one to slave and one as master.At th ... Gateway GT5220 PC Desktop

I just installed a 2nd hard drive, but the system isn't recognizing it...i checked device manager and it isn't there... is it something i need to do in the bios? if so, what do i do? thanks alot m


If the drives are connected with an IDE strap,Ribbon cable, then the drive that has the operating system on it needs to be set as masterand the second drive needs to be set as slave.Read the manual for the drive, the settings are in ... Dell Dimension E310 PC Desktop

I am preparing to use a Western Digital WD800JB-00JJC0 hard drive for the first time. I will be using the unit as an external drive back up after loading acronis software on my PC. I see on the unit sticker a digram showing "Standard Settings" 'slave'; 'master w/ slave present'; and 'single or master'. Q. Are these diagrams alternative representaions of the J8 jumper settings, which currently has a jumper across pin #1 and pin #2 of the J8 jumper? Q. Do I need to remove or change the curr


Please see picture show what you need to setting, is there helpful? \015\012 ... PC Desktops

Installing dvd drive


When you connect two drives to a IDE cable, one of the must be 'master' and one 'slave', whichever is master will show up first and slave will be second.If you're only using one drive, it needs to be set for 'single', (which may or may no ... Systemax AOL Optimized PC (100607) PC Desktop

My matser hd oin is aet to master. My slave is set


The first thing you need to do is edit the boot.ini filehttp://support.microsoft.com/kb/289022This will explain how to do that.This part is only a ... Symantec Norton Partition Magic-8.0 (10256717) for PC

Sata as boot and install eide drive as d:or e:


You can slave the EIDE hard drive off of the CD Drive, as long has it is also EIDE. There should be a flat grey ribbon cable plugged into the back of your CD Drive. That IDE ribbon cable should have 2 connectors on it, one of them should be plugged ... PC Desktops

2232bw samsung DVI in problem


There is nothing broken, but you must become aware of the different standards in DVI connectors. 1)DVI-D which you have, does not have the 4 analog control pins around the alpha bar meaning it only works on digital devices.2)D ... Samsung 226BW Monitor

Where do i plug in a second hard drive on the motherdoard on a hp pavilion a1220n


It will be either a SATA port which is small approx 1/2cm by 2cm or a PATA port which is a whole lot larger approx 1cm by 7cm and has little pins. If you choose PATA you will have to configure it as a SLAVE to y ... HP PC Desktops

Toshiba Laptop A60-S166 fdisk won't recognize hard disk? ACPI Bios Version = 1.40 Bios setting Drives I/O where it says Built in HD = No Drive Built-in ODD = Secodary IDE(170/IRQ15 Won't let me get into this bios setting box. Tried 3 different hard drives. Thank you from Ken Walker [email protected] Phone 731-645-6349 Thank you, please help if you can?


Hmmm. Unusual report, "secondary optical disk". Sounds like you have a primary and secondary IDE setup. Something desktops had, but rare for laptops. Because of this, I would try setting the HD to "master". Most IDE HDDs have some extra pins beside t ... PC Laptops

When I attempt to log on to my computer, I get message "Loading personal settings", but it immediately changes to "Logging off"...I can't even log on.....HELP!!! I am using an emachines w4685....


Hi, My Name is ArmyMason, I am here to help you. Are you seeing any flash of Blue Screen before it reboots? If not it sounds like you have a boot virus. If you can't boot to Safe Mode best the way to fix this is to pull out the hard drive and p ... eMachines W4685 PC Desktop

Hi i have a 10.1gb Maxtor model 31024H1 IDE hard drive and i need the jumper setting for slave


Slave is NO jumpers at all \015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012(Master) - The vertical jumper over the J50 pins is configuring the drive as a Master. The horizontal jumper over the J48 and J46 pins ... PC Desktops

Reloading windows xp


Replacement Drive? If you are talking about a Hard Drive the answer is: You can buy any hard drive as long as it is the same type from any computer store. Take your Hard Drive to the store and tell the sales person that you want another hard drive ... Dell Dimension 4600 PC Desktop

Computer TV output (RCA) - no colour


I had the same problem and nothing worked for me until I changed laptop settings to NTSC_M\015\012So, briefly what I have: S-Video to S-Video cable, laptop (Thinkpad R51, Windows XP, with Intel(R) extreme graphics controler ) and T ... PC Desktops

Battery wont change


A problem is just like a mountain. You don't jump over the mountain, you climb it in steps, one step at a time.1.How old is the battery? 1 to 2 years old, you can expect it to be at the end of it's Life Cycle. Batteries are rated in so ma ... Dell Inspiron 1525 Notebook

I would like to know pin set for dule hard drive


You can set one to master and the other to slave or both to cable select. it depends on the manufactuerer which exactly the pins need to be place. check on the sticker on the drive should tell you which needs to go where.hope htis helps ... HP PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7144 seconds