Having problems with your PC Desktops ?
No signal from wirelss mouse and unknow charging
\015 Hi, I have a digitech mouse and keyboard combo, (DMM-WKBM),\015\012Two problems:\015\012\015\0121) I cant tell if that batteries charege because when i dock the mouse on the charger, the light comes on, and after about 10seconds starts flashing, slower and slower..... and then pretty much seems to be off all the time.\015\012\015\0122) When trying to connect the mouse with the reciever, It isnt picked up, i thought it may be the batteries so i tried two other sets of batteries... It onl recieves signal from themouse when the blue connect light is searching for it, and then i can only move thecursor very jerkly and cannot click, but that soon stops and i have no use of the mouse at all.\015\012\015\012What would theproblem be?\015
It could be interference from other electronics that are too close, mouse too far from receiver, or it could be a faulty reciever. If it has more than one channel try this first. If not contact the manufacturer as Digitech is really good at backing their products. Hope this helps.
Repair Help & Product Troubleshooting for PC Desktops
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
No signal from wirelss mouse and unknow charging
It could be interference from other electronics that are too close, mouse too far from receiver, or it could be a faulty reciever. If it has more than one channel try this first. If not contact the manufacturer as Digitech is really good at backing t ... PC Desktops
Hello, I have a Gateway model GT5662, stock setup - Will not boot
Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC
My mouse is wireless. I bought it at a yard sell and didn't come with instructions. How do I get it to work?
For any wireless mouse you need also a receiver to transfer the signal from the mouse to the PC. If you don't have the receiving unit, you cannot do anything with your mouse. If you do have the receivign unit, mostly plugging it in makes windows reco ... PC Desktops
Newer monitor to older xp pc
If your monitors are displaying "no signal" they aren't receiving input from the video card. If your PC has two video outputs (onboard) try charging to the other output to see if it will come on. Also reseat your video card in its slot. Also, what ca ... PC Desktops
Various Problems with Pavilion dv9205us RECALL?
Locate an HP certified repair facility near you and let them work on your behalf, a lot of times they can make a big difference in how the manufacturer handles a problem such as yours... ... HP Pavilion dv9000z Notebook
Compaq Presario V2000 touchpad/battery charging problems
I noticed you were talking about over heating issues. Does the mouse issue happen when the computer is on for a period time?I know with some laptops there is software for the "gadgets" on the mouse pad. If you have software related to it. ... HP Compaq Presario V2000 Notebook
I have a logitech cordless mouse that does not charge when placed
Either ur cradle or ur battery hav been damaged...\012\012try changin it... ... Computer Utilities & Maintenance
MY mouse has a red light that continously flashes. I charge it at night and all day the red lit flashes. Time for a new mouse or what?????
You need to tell us more then "MY mouse"... but I'll try to help.First: there must be button to power off/on your mouse, switch to off and then on. If red light continues to flash clean connections on mouse and on dock (where you charge mouse), ... PC Desktops
What signal is sent over the center pin of the power adapter?
The problem isn't in the psu - it's in the laptop. The centre pin supplies a trigger voltage with a simple carrier which tell s the BIOS about the power characteristics of the unit. Missing that signal, the BIOS assumes that even though there may be ... PC Laptops
Mouse wont work , I have put new batteries in & have also looked in control panel which says it is working ... Red light is on. HELP...
Recommendation: \015\012\015\012\015\012\015\012Make sure that the mouse is connected physically to the correct port and that it is not\015\012 loose.\015\012Check the mouse wire ... PC Desktops
I have a Sigma optical mouse and my neighbour through the wall has recently bought a different remote mouse for their pc. Every time I use my pc at the same time as them there seems to be a conflict with the mouse and their mouse seems to override mine on my pc. Is this possible that my remote mouse can be picking up their signal? And if so how do I get around this (apart fom using a standard mouse)?
Quite possible. As your mouse (from my research, anyway) doesn't have any way of changing the wireless signal channel or frequency, you may find it easier just to opt for a new mouse. To ensure it doesn't conflict, you may also want to think about ge ... PC Desktops
Don't know what to do next with Acer Aspire One!
I'd let it charge for atleast 12-24 hours if its not documented. If its not fully charged and then discharged for the first use you can dramatically reduce its effective charge hold.As for your WIFI router connection you will need to cons ... Acer Aspire One PC Notebook
Replacement USB charging cradle for Logitech Mouse
It sounds like you are talking about a wireless unit, and I am going to assume that it has stopped charging.....Try this first before you purchase a new cradle for it....Take a pencil eraser and clean the terminal prongs on the cradle, just as if you ... PC Desktops
The receiver doesnt light up when pluged into the usb port
Sound like the receiver is down try other usb ports to charge your ipod if it works well it is your new mouse receiver thats capoot ... PC Desktops
Gateway MT3421 Laptop start-up Issues
Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook
Logitech MX Revolution Mouse turns on and the baterry light blinks after being dropped, what needs replaced and where can I find the parts?
Unfortunately, the only parts sold by Logitech for this device are the dongles. The MX Revolution is equipped with a non-removal rechargeable Li-ion battery. Try placing it back in the charging cradle to recharge the mouse. Make sure the mouse is sea ... PC Desktops
My touchpad mouse has stopped working. Hardware and driver are completely okey but it still does not move. The strange matter is that the mouse works only in case of pressing "mute button" on the laptop in addition to touch pad (simultaneoulsy). moreover, the enter key has stopped working and there is a continuous beep while turning on the computer (for about several seconds). Is there any relation between these events? please help me specially with my mouse.
The beep(s) you're hearing are most likely the POST (Power On Self Test) error signal(s). When your computer is first turn on it runs a series of test call the POST. This signal is indicating that there is something wrong with the computer hardware. ... Dell Inspiron 6400 Notebook
Cursor stops working when power cord is plugged in...
It sounds as if the power coming through your ac adapter may be causing interference with the touchpad, meaning perhaps an electrical signal is crossing into your mouse or disrupting its signals. \015\012\015\012You could try to download ... Dell Inspiron™ E1505 PC Notebook
The mouse pointer on my HP nc6320 jumps around intermittently and is very difficult to control. This problem only occurs when the laptop is fully charged and is running off the battery. If the battery is charging it's fine and also there is no problem when the laptop is running from the battery. Any ideas what could be causing this? Thanks in advance and Happy New Year 2010! Alan
Hi Alan, \015\012\015\012From your description I understand that the cursor jumps intermittently. This happens when the sensitivity of the touchpad is more or high. Try lowering the touchpad sensitivity.\015\012\015\012Here ar ... HP Compaq nc6320 Notebook
Have Garmin 265W. Lose signal for up to 45 min.
Ok here' the most likely cause. LOW BATTERYYou need to properly charge the battery with the AC charger or the USB. NOT the car charger, this is only a maintenance trickle charge.Some windscreen types restrict connections. If your sc ... PC Laptops
Irq dma err
IRQ's (Interrupt Request) LinesIRQ's are hotlines to the main computer (CPU) that allow devices connected to the computer to signal the CPU that they need immediate attention. If you're a Batman fan, think of IRQ's as the Batphone - getting his atten ... PC Desktops
Another keyboard skipping until I removed the dead battery, now it works.
Turn off the touch pad mouse, there is a button to do that. If the problem is still present then remove the mouse driver and go to Synaptic web site and download the most current driver. HP is the place to get the driver though. For some strange reas ... HP Pavilion zd8000 Notebook
Replaced battery in mouse, although connection lights are flashing & I have reset, neithet mouse or keyboard working
HiMake sure that everything is plugged in properly and charged up. If you are sure that the mouse and keyboard have charge then try using them. If they do not work then try using a standard wired keyboard/mouse. If these work then you know that ... Belkin PC Desktops
I want to know if when you charge the new rechargeable batteries in a wireless mouse should the mouse be switched to the on or the off position.. Thanks.
Hi,\015\012\015\012You can charge it whether it's on or off. I recommend charging it while it's off. ... PC Desktops
Dead My computer dead when electricity was down. i test power supply to another computer, it works. i put windows xp and install, on the mouse and keyboard stops functioning and fail to command installation.
\015\012\015\012Check your Keyboard-Video-Mouse (KVM) switch. If the system is connected to a monitor, mouse, and keyboard through a Keyboard-Video-Mouse (KVM) switch, or console selector switch, then disc ... IBM NetVista PC Desktop