Having problems with your PC Desktops ?

Need to reprogram

\015 I have an Oregan Scientific weather station and need to reprogram it. The model no. is RMR613HGA.\015

Answers :

Even the manual isn't clear if you can find one. Here's how to do it.

1) Sit your remote next to your base station with the battery cover off.
2) Select which channel you're going to use, i.e., 1, 2 or 3 by sliding the switch on the remote.
3) Press the channel button on the base station and select the same channel.
4) On the base station press and hold MEM and CHANNEL for 2 seconds. (IOW, the MEM button on the back and the Channel button on the front.) This will cause the channel number displayed to have the signal symbol displayed and animate to the very right of the channel number.
5) Press the RESET button on the remote once with a toothpick.

The numbers should appear on the base station. If at this time you decide to sync the base and remote to a different channel, you've messed up. It's best to removed the batter from the remote and wait about an hour (or until there is no display on the base station), then start all over again with the channel you want without changing. The key to all of this, once the numbers are displayed, ignore them for about an hour after you mount or remout your remote as not only may the number not appear accurate, they may go blank again. If the next day they are blank and you are certain you are on the right channel, leave the remote alone and use the MEM and CHANNEL method for the base station, then wait, wait and wait. It will usually resync.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to reprogram

Even the manual isn't clear if you can find one. Here's how to do it.1) Sit your remote next to your base station with the battery cover off.2) Select which channel you're going to use, i.e., 1, 2 or 3 by sliding the switch on the remote. ... PC Desktops

I have an old IBM thinkpad that needs reprogramming..

You can use any Operating System disk (such as Linux, Windows, etc) to reload your laptop. The trick is you have to go to the IBM website (lenovo.com) and download the drivers for your system after loading the Operating System. For your laptop, it ... IBM ThinkPad T22 2647 Notebook

No color red displays.

If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

I found a laptop and its mark is gateway but i want to know how to reprogram it because i don't know the password to it i want to know how i can reprogram it

If it is a newer laptop you should report it. The newer systems have a LOJAK style program in the bios that allows the owner to track its whereabouts regardless wether or not the system has been reprogramed. But as far as doing the programing goes y ... Aspire Acer AS5315-2856 Laptop

HELP! Cannot start my laptop.

You need to enter in save mode when you start the computer keep push the F8 key until go to save mode and unistall that program them rub a disfrgment disk to ensure that al part are in there place.. and tha it.. good luck.. it dosont work you need to ... Acer Aspire 5500 5570-2609 Laptop

How to replace the computer module for the 2002 odyssey van?

You will need to locate your ecu use Google by typing in your make and model and year etc then you will need a new ecu and a suitable diagnostic computer to reprogram any electronic functions that may need calibrated ... PC Desktops

Won't boot up. won't turn on.

1. Check if your hard drive is been detected from your system using the bios. 2. If your hard drive is detected, you need to set it as the first boot device. 3. If you have windows xp loading screen but it stops and just restart, you need ... Acer Aspire 5735 Notebook

Bios flash failure

Not good new i am afraid :(Your bios chip needs reprogrammed. If its a removable one u are in luck and can buy a replacement but most laptop are soldered on ones so it will need to be done professionally.Never flash bios when ... Sony VAIO FR130 Notebook

How do i reprogram a 2wire 2071-A - PC Desktops

First, get the modem/router's setup and user manual from http://www.2Wire.com/pages/driversanddocumentationsupport.php?did=6After studying those, read the instructions athttp://support.2Wire.com/index.php?page=view&article=21 ... PC Desktops

My 2003 dodge stratus was missfiring. I checked all of the wires going from the coil to the ecu and it was fine. I decided to change the ecu. I got a used ecu, the numbers match exactly. It started up for about 3 seconds and died. the red alarm light came on. The car wont turn over now when i try to sart it. Could this be because i didnt have the vin programmed into the computer?

I believe that when you change out the ecu that you have to reprogram it with a scan tool. And of course when you did it you disconnected the battery so when that is done in addition to changing the ecu , stored operating parameters are lost and the ... PC Desktops

Reprogram my lap top

You can use the recovery disc or windows setup cd to restore the laptop to the original state and the problem will be gone.\015\012\015\012if you don't have either.. the windows setup cd is not sold separately so I suggest you try to get ... Aspire Acer AS5315-2856 Laptop

Receiving "Load Error!" on bootup. Tried using the recovery disk which seemed to be working fine, but still receive the same error. I've run the recovery disk several times with the same result.

If you had run recovery disk for several times and still have the same problem then you must go to other solution. Reprogram your computer operating system, this is last thing you have to do. You need your operating system installer. Setup a fresh co ... Toshiba Satellite A45-S250 Notebook

I had a bad virus on my desktop (model M1100) and need to restore to factory settings without a disk. I can get into the recovery screen but i don't know the acer password

If you want to restore it and remove the virus, u need to reprogram your mobile ... Acer Aspire M1100-U1402A Refurbished AMD Desktop PC - AMD Athlon X2 4400+ , 2GB DDR2, 320 SATA II, D

Computer doesn't stay booted

You need to replace the RAM ... ... HP Compaq Presario S3000nx (DC475A#ABA) PC Desktop

Updated firmware for cd/dvd drive SN324F now the drive is not working and unavailable on my Samsung v25 laptop pc?

First thing you need to do is to enter your BIOS usually by pressing either <Delete> or <F12> during boot up (Depending on your BIOS) next look at the page that has your hard drive and optical drive information, If your CD/DVD is shown on ... PC Desktops

I have a Dell Inspiron 1525 that won't turn on at all. The adapter is fine, it has been tested and it works with other computers. There is just no energy going through the computer. It worked perfectly fine in the afternoon: I shut it down and closed the lid. In the evening, I tried to use it and noticed that there was no power going through it. The computer was completely dead. Why won't it power up? The computer was stationary so there was no hard bumping. Any help will be greatly appreciated!

I have exprince about this problem and i solve many times only u need to update bios... how its diffcult ...coz u need to open laptop and remove ic then u have a programmer for reprogramming ... bios file i can send u that's if u send some 1 they w ... Dell Inspiron 1525 Laptop

My Roland RD 500 electric keyboard has a sustain problem. It sustains on its own without pushing down the sustain petal. Really it seems to be working opposite, when I push the petal down it stops sustaining. Has my computer been messed with or do I need to reprogram something?

I would agree with you. I do believe the computer will have to be reprogrammed. You can get a program called "system restore". It will erase all the data and memory completely. you will than have to order a new program disc. ... PC Desktops

Do not remember the old code and need to use this again.

Did some research and it looks like the default arm/disarm code is 0# ... PC Desktops

Singlle long beep on booting up my Biostar M7NCDPro motherboard with nothing on screen

If you get one continuous beep (Long and Non-Stop) \015\012\015\012This could happen if:\015\0121. The Power supply is damaged or bad. \015\0122. The BIOS is corrupted. Try resetting the CMOS using JCMOS1 jumper on the motherboard o ... PC Desktops

Vaio desktop won't even start up!!!

It does that to mine to but I leave it like that, it never affect my pc any way. but if your really want to get rid of that you need to reprogram your pc, by having vista or xp. booting is the best. but before you do the booting you need to back up ... PC Desktops



I Have an hp ze4300 laptop. it will not boot up?

Seems the laptop doesn't start up properly, the bios maybe corrupt or you have a hardware fault. the bios may need to be reprogrammed and parts need to be tested to see what the problem is.Theres not much we can do ... HP Pavilion ze4300 Notebook

Serial showing incorrect serial/ need tool 2 correct it

Contact your Hp auth agent and get them to reprogram the eprom - it is a program only supplied to auth Hp agents - called setconfig and it is a real pain to use.glenn ... HP Business Notebook 6715b

I have the same problem. I get a box with "not optimum mode. But what I need is a picture of the mainboard with the 50 ohm resistor between pin5 and pin6.

\015\012hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done w ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Toshiba Satillite A100 "TBX Error"

This needs BIOS Reprogramming. Go to the nearest service station for the Chip to be reprogrammed. ... Toshiba Satellite A100-S8111TD Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4674 seconds