Having problems with your Computer Utilities & Maintenance ?

Burning dvds ive never had any probs with my dvds but latey the picture has started juming so it looks like the picture temporely stops every 1-2 seconds. it looks robotic. no probs with sound though and all my files play perfect on the pc. any advise? cheers, Dave.


Answers :

It could be either a problem with the burning software maybe you are burning the disks to fast maybe the dvd rewriter is on its last legs. or have you recently changed what dvd disks you use.
Repair Help & Product Troubleshooting for Computer Utilities & Maintenance

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Burning dvds ive never had any probs with my dvds but latey the picture has started juming so it looks like the picture temporely stops every 1-2 seconds. it looks robotic. no probs with sound though and all my files play perfect on the pc. any advise? cheers, Dave.


It could be either a problem with the burning software maybe you are burning the disks to fast maybe the dvd rewriter is on its last legs. or have you recently changed what dvd disks you use. ... Computer Utilities & Maintenance

Dell tv/monitor picture goes blank after 1 second upon power-up


The synchro transistor has died. The only option is to have it repaired. Just had it happen to mine, can't tell you thye cost yet though as I have a loan monitor while dell fix it. Of course they will find more than 1 item i bet. But a tch who works ... Computer Monitors

Need Help Using the Presario V2000 Expansion 2 Port


If you have a little plastic cover where the Expansion Port 2 should be, then your specific model doesnt have the port. i know what you mean, when I got my first V2000 i thought the same thing, that there is a port hiding there. my second V2000 had t ... HP Compaq Presario V2000 Notebook

NEED ASSISTANCE w/ DELL PC


When you first turn on the system, listen closely for any beeps. If you hear any try to remember or write down the pattern of beeps. Then go to Dell's site and find the manual for your model and look up the BIOS or CMOS error codes. This will indi ... PC Desktops

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

When I start up, the monitor flashes on, and sometimes for a couple of seconds displays the screen. Then it goes black. If I cycle the power it flashes the screen on for a second then black again. For the second you can see the screen it looks fine. Your thoughts


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is usually caused by parts called\015\012capacitors overheating in the confined space of the m ... LG L1932TQ LCD Monitor

Hdmi to panasonic tv no desktop display only


I can help with getting your desktop onto your TV, but sound from your computer through HDMI can be much trickier.If you only see a background picture on your TV, then your desktop has been either "extended" or "stretched" onto it. It is ... Acer Aspire 3000 Notebook

Blank monitor, flashing power light?


Ok, so the the monitor is getting power, there could be a few faults for this problem, first the power board needs to be checked for bad capacitors, this will involve you opening the tv, at the back you see a few screws have a good route around thoug ... Computer Monitors

I have sound but no picture


Looks like a capacitor failure in the circuitory. You may need to take it to a technician and get it checked. ... Relisys RLT1720 17" LCD Monitor

AG Neovo X-17a


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Neovo AG 17" LCD Monitor

I have a samsung 920nw monitor bought it new. It has worked great for months, this morning I went to turn it on and it only came on for a second then turned off. I have restarted the PC and the monitor repeatedly with the screen only coming up for 1 second then going black w/ the indicator light staying on not blinking. I've connected it to my laptop with the same result and even unplugged it from the PC just to see the check signal cable screen and it still only stays on for 1 second. Please he


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Samsung SyncMaster 920NW Monitor

The picture disapears, though the monitors stays on - every few seconds


Check the cable connections on the back of the monitor and the PC it sounds like the connection isn't made properly make sure they are tight. ... BenQ FP71E+ (Black, Silver) (Silver, Black) 17" LCD Monitor

Viewsonic P225f CRT - clicking "short circuit" sound, shrinks and expands


Just on a whim I'd say open er up and dust it out , and look for bad solder joints.\015\012\015\012That means get out your soldering gun and have a look around the board.\015\012\015\012what you described is "intermitant failu ... ViewSonic P225f (Beige) 22" CRT Monitor

Lcd quit working


There is a 95% chance that your powerboard needs to be upgraded with a few newer-better components.I repair many gateway boards on ebay and this is a common occurence.There is also a slight chance that a bulb is weak and is causing ... Computer Monitors

My Pictures has suddenly slowed to a crawl.


1. The amount of pictures on your hard drive will not cause the slow ups that you are describing.2. You can check your memory by removing one module and see if it helps. If it doesn't, check the other module by itself. I don't think it is t ... Dell Dimension 2400 PC Desktop

Hi, my TW-191 suddenly quit working yesterday. . . it is only 2 years old? When the PC is first turned on the amber light turns green and the screen is displayed then after a few seconds goes blank. Through various trial and error checks I've discovered the when I disconnect the VGA cable and reconnect it the screen will reappear again for a few seconds before going black??? Is the monitor toast? BTW, I've tested my PC with a spare monitor and it works fine.


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Hannstar I-Inc TW-191D Monitor

Power Surge damage. Suggestions on which part to replace.


I would start looking at the power supply, it's usually a separate board where the a/c line plugs into. In many cases i have seen that the problem you described is from a damaged power supply, sounds like something is shorting causing the power supp ... Proview PL713S 17" Flat Panel LCD Monitor

Dell E173FP - After sometime the screen switches off


Sounds like the power inverters went out on alot of these dell flat panels...dell should make it right with these customers i think it is faulty hardware or design ... Dell E173FP 17" LCD Flat Panel Monitor

Burned DVD's great sound but no picture??


The first thing I would be tempted to say is that it is a windows CODEC problem. You need to make sure all of the codecs are installed properly for dvd playback, being that you are getting sound and no video. There is a program called G-Spot that wil ... PC Laptops

Zenith 13in flat screen tv has no picture...


Also check if your cables are fully seated. I've been loosing video but not sound through my digital TV converter box. I finally climbed in and found the cable was loose. ... Zenith L13V36 13" Flat Panel LCD Monitor

Westinghouse L1951W will not display. It was fine but went blank. I can get it to display for a second or two by turning off and on but it goes blank after that. It has power and is connected correctly. I uninstalled and reistalled it but it did not help.


Hello,This sounds like your power supply has blown capacitors. Heat buildup in LCD monitors can cause the power supply capacitors to blow out after 2-3 years of use. Check out our site at : ... Westinghouse Electric LCM-22W2 Monitor

I have 2 Gigabite 19'' - 8ms monitors plugged into a G5 mac. Both was working fine. The right hand screen (second display) switches on with start up and then 2sec later it switches off. Then i can switch it on manually then it displays for 2 sec then switches off again...?


Hello,it sounds like you have a power supply going out. Because of the small spaces inside LCD monitors heat builds up and blows parts called capacitors. If you can solder you should be able to do the repair yourself. Go to our web page a ... Computer Monitors

Gateway LP2207 Monitor/black/clicking noise


It may be fixable, I do quite a few of these though ebay. Power spikes can sometimes travel to bad places .\015\012\015\012If you don’t have the startup\015\012sound when you plug it in, the main board may be bad. ... Computer Monitors

Screen display problem


It sounds like your "backlight" went out. This is a tiny compact fluorescent bulb in the LCD that lights up the screen. There are usually two reasons for this 1) the bulb burns out or 2) the little circuit board that powers the light fails, this is ... Acer Aspire 3690-2196 Notebook

Screen turns on for a second then flashes off. Just saw a post that said this could be a capacitor problem. The Monitor is the 225bw not the 275t


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitorswillblow a power supply. The problem is caused by parts called capacitorsoverheating in the confined space of the monitor. If you are good a ... Samsung Syncmaster 275T Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7338 seconds