Having problems with your Computer Monitors ?

Horizontal view on screen will not re-center

\015 Last nite when I booted up my system, everything on the monitor is shifted to the left. I have used the buttons on the bottom of the moitor (menu, Lightview, <, Source/>, aoutoselect) to move the horizontal view, but the the images still do not center, and I cannot see the left edge of the images.\015

Answers :

I am having the same problem --- just received this item an hour ago. This is not a total solution, but it is a workaround. I shifted the H position to as far right as it would go using the OSD. Even with the H pos at 100, the left 10-15% of the desktop was still shifted off the left side of the display. In this configuration, I was able to use the mouse to call up the "Start" menu, and I reached the control panel. I found that the monitor properly displays every resolution from the lowest offered, 800x600 up to 1600x900. It is only 1680x1050 that does not display properly.
\015\012
\015\012 So I am working around this problem by using 1600x900 while I try to find a fix for the 1680x1050. I'm thinking that this may call for a contact to the acer tech support people.
\015\012
\015\012 Hope this helps.
You want to locate Position or Horiz Position from the Menu screen. Press menu first then Up or Down to select the item you want then Left or Right, I can't be more specific as all monitors are different - but there isn't a single button to center. You could also try the different input settings (Analog, Digital, etc) if the Autoselect isn't working properly.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Horizontal view on screen will not re-center


I am having the same problem --- just received this item an hour ago. This is not a total solution, but it is a workaround. I shifted the H position to as far right as it would go using the OSD. Even with the H pos at 100, the left 10-15% of the desk ... Computer Monitors

Flickering, jittery image, white horizontal flashing lines


... HP Pavilion F1703 17" LCD Monitor

Toshiba laptop running Vista won't connect to Kodak ESP7 Printer


Connecting Kodak ESP 5250 Printer to Windows Vista PC through Wireless Network.After following the initial steps in the Start Here booklet that comes with the printer (unpacking, connecting power, inserting print-head/ink-cartridges and c ... PC Laptops

Trying to connect Inspiron 6000 to TV


If there is no display on your TV, HDTV, or Projector, please make sure that all of your connections are set up properly and that you have enabled the display in the Catalyst Control Center. \015\012The connectors that you will be using would b ... Dell Inspiron 6000 Notebook

The view on my monitor is very truncated - about two inches top and bottom are not filled


This is generic to most displays (lcd or crt). Find the menu button on the monitor (it is a physical button). When pressed, it will display menu of labeled icons on top of whatever image you have on the screen. Arrow or < > buttons will move yo ... LG Computer Monitors

Milk white screen.


Hi,\015\012You are having pixel problem..\015\012Pixel guidance will vary according to the flat panel purchased from Dell. E151FP This has a standard 2 bright pixel defect tolerance before Replacement will ... Dell E151FP 15" Flat Panel LCD Monitor

Elongated desktop and software screen images


Many graphic cards enable you to rotate the screen up to 360 degrees. You could try to post this question again under you graphic card model instead of computer screen model as it is your graphic card that is certainly the problem. ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

CRT Monitor Displays only a thin bright horizontal line


Vertical IC loose connection. Best is to reflux it or resolder. It is in internal circuitry inside the monitor commonly an upside single line IC. And its a minor repair only. But I recommend it to be serviced by a qualified technician. In ... Computer Monitors

Monitor is vertical display instead of horizontal display


The keys ctrl+alt+right arrow should do the trick for you. if not then right click on the keyboard and select properties for options and you will find your graphics software has its own rotational software. good luck with two year old, sounds like yo ... Dell Computer Monitors

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

There is a black 2 1/2inch bar on leftside of screen how do i adjust is?


If your lucky it's just your H-center is off tilt. to check this Press the menu button on your monitor. scroll through the options till you see Horizontal-center option. select this setting and move the screen to the left. The entire screen shoul ... X2Gen MG19MY 19" LCD Monitor

Shows half screen only!


If you can't expand your screen size from the pulldown menu or vertically or horizontally center the picture one or two of the centering coils could be partially burned out. the monitor uses electromagnets around the crt neck to center the picture. ... Compaq MV 540 15" CRT Monitor

Screen is distorted


\015\012hi there,\015\012Below the monitor, on the center are option button, you can explore that in adjusting your screen display. You can widen the display, or tweak it depending on the angle that you need to. Just press the center button and ... Dell E771p 17" CRT Monitor

Monitor resolution I have reset the screen settings, but the icons are still too large, and the red exit button will not show on the screen. The view is warped whenever I open a window. I have changed the DPI settings and adjusted the H and V settings using the menu. Nothing helps. someone else readjusted the screen, forgot what they did, and now wants me to fix the problem.


Sounds like either the trapazoidal is off or the pincushion is set improperly. You should be able to find those settings via the monitors onboard menu. Either one can create such a problem.You might also check into finding the factory ... Gateway FPD2275W LCD Monitor

Red horizontal line on my screen


You have pixels that are dying unfortunately there is no long term fix beyond replacing the screen.there is a way to sometimes unfreeze them but it does require special equipment. Contact your manufacturer and get the number to their loc ... Dell Inspiron 1501 Notebook

CRT Monitor Displays only a thin bright horizontal line


... Zenith L13V36 13" Flat Panel LCD Monitor

I dropped my laptop and now the screen is messed up.


Ack. Sounds like you might need to replace your screen (sounds pricey but is cheaper than a new laptop). You can find second hand/refurbished screens or another Aspire with a working screen being sold for parts on Ebay or ... Acer Aspire 5500 5570-2609 Laptop

Problem with Screen in Horizontally Reduced


Set the screen resolution on the computer to some place like 1024x768. Use the menu buttons to resize the screen screen.\015\012If the monitor is not keeping the settings it can be an indication to get a new monitor. ... Dell E773C 17" CRT Monitor

I just bought a 23 in. hp monitor and i can not get the picture to fit the screen. vertical is fine but the horizontal will not go over. there is about an inch of black on left and 2 or 3 on right side, you cant even get it to center right.


Friend,\015\012\015\012This is what happens when you have clicked a pic from 4:3 camera and are trying to see it on 16:9 ratio. The width is more than the height (the ratio of both sizes). Now, to see the pic in the middle of the screen you mus ... Computer Monitors

My problem is about our lcd monitor, at first it has this vertical black color between 2 sides and i like it because it does not affect the horizontal view in my games,,but now, the black in the 2 sides which serves to correct the horizontal view is gone. leaving my all of my games look greater in horizontal length..in short, a thin character looks fatter in view..hope someone could help me,,


I think your screen is set up for "widescreen".This is also called 16:9.I would browse the monitor's menu (where you adjust the brightness and contrast', and see if you can put it back to 4:3 (4:3 is the ratio of a TV, kinda square" ... Computer Monitors

Black at left and right of monitor


Since this is a CRT monitor, it doesn't have a native resolution like LCD monitors. You need to adjust the veritcal and horizontal sizes to fit the monitor. On the front of the monitor there are some menu buttons. You need to open the on-screen me ... Samsung SyncMaster 753S 17" CRT Monitor

Screen is off-center


Hi there if you press the menue controle button you will come to the main controle screen and scroll down till you see the adjust horizontal aaand press the button again now you will be able to move the screen left or right and set it to your liki ... KDS Visual Sensations 551 (White) 15 in.CRT Conventional Monitor

Can not get a full screen lack 1 quarter inch on both side of the screen


If you have an lcd monitor, depending on the model, there should be an auto adjust function which automatically fills up the screen. If it doesn't, follow the CRT instructions below.If you have a CRT monitor however, if you want the monit ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4434 seconds