Having problems with your Computer Monitors ?

Monitor switchs between digital and analog

\015 My SyncMaster T220 monitor just started 4 days ago randomly beginning to switch constantly between Digital and Analog.. the only way it stop is if i restart my computer. but then it keeps happening and it's getting rather annoying when trying to watch a movie..\015

Answers :

I had a similar problem, the monitor was going blank once in a while (since I don't have a VGA input), so I switched the Auto Source feature to\015\012"Manual" and so far it's working fine for the past 2 days, if I run\015\012into the problem again I'll update this message.

On the side\015\012panel of your monitor, press the top button to access the menu, scroll\015\012down to the setup menu (by pressing the 3rd button down on the panel),\015\012press the 4th button down to enter the setup menu, scroll down to "Auto\015\012Source", use the 4th button to select, "Auto" & "Manual" are your\015\012choices.. press the 2nd button down to select "Manual" then the top\015\012button to exit the menu(s).

This monitor is set up to be able to\015\012do multi display with the software included. Utilizing both Digital and\015\012Analog signals. I'm not using this feature so I'm not sure how\015\012switching the Auto Source off will affect the performance of this\015\012feature.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was tring to Connect Two Computers to One Monitor, but i didnt get it, does someone know how to do so? I bought a KVM switch, USB to use between a new Acer running Win XP and old Dell with Win 98. Could not get the Dell to show up on the monitor, although the correct light shows up on the KVM and the USB mouse lights up when the computer boots. -- Read a few minutes ago about a source switch and found that my flat panel has a menu item to switch from analog to digital input. Could that be the


I guessing that since **-one responded you've given up and returned the whole mess but what the hey.A lot depends on the KVM you're using. There are some high end units that will match different sources to the monitor but most work best ... AOC 19LVWK LCD Monitor

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

Monitor switchs between digital and analog


I had a similar problem, the monitor was going blank once in a while (since I don't have a VGA input), so I switched the Auto Source feature to\015\012"Manual" and so far it's working fine for the past 2 days, if I run\015\012into the problem again I ... Computer Monitors

I need help setting up the DVI input.


Hi,\015\012\015\012There are two ways to do this.\015\012\015\012First and simplest is to simply shutdown the pc, disconnect the analog from the back of your PC and connect the DVI cable to the PC and monitor. When you turn i ... ViewSonic VX924 19" LCD Monitor

LG Flatron W2252TQ 22'' monitor not working in digital mode


Try to set your screen resolution to maximum using Display Settings in windows. Besides, are all software drivers for this monitor loaded and properly installed? Right click My Computer=>Properties. select hardware => device manager. Make sure ... LG W2252TQ Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Kittens were playing pounce/hide and seek around my computer. The LG LCD monitor (L227 WTG) now staying in analog power saving mode and I can do nothing! Right before it got stuck in that, the color went from a sunset of pinks, blues and corals to black clouds and green. :-( Now I can't even get that far to be aggravated by the color changes. I don't know what the kittens did, but my computer does not like it! Help?! Please!


Check to insure that the connections are all securely connected, they could have bumped one loose. Also a lot of monitors have dual inputs, one for analog and the other digital. There is usually a button on the the front of the monitor that allows ... Computer Monitors

No digital signal but analog works fine


Seems like this was already answered?\015\012\015\012But once you've checked against the owner's manual and ruled out the PC, I would suspect the signal / video board inside the monitor. May have gotten a surge or static, etc. ... ViewSonic VA712B 17" Flat Panel LCD Monitor

Digital mode of VX2035wm has stopped working


I recognize the model number as a Viewsonic model. Check the digital input using another computer to make sure it's the monitor.If you're brave enough, do this:Open the unit and check to see if any of the\015 ... Gateway FPD2275W LCD Monitor

When my monitor comes on it displays a blue box that just contains the word analog and then the box goes away


It is not receiving a signal, check the connections. Also most monitors have dual connections, one for analog and the other for digital. If yours is using the DVI Digital connection then you need to switch you monitor to that input. There is usual ... LG W1934S-BN 19" Monitor

Problem with Digital Input


Hi,You may need to switch monitor selection in your Display Properties. You need to activate twin/dual view in your Display Properties. Right click on any\015\012clear area of your desktop, click on Properties, click on Settings tab,\015\ ... Dell UltraSharp 2001FP 20.1" LCD Monitor

Monitor has solid green LED, but no display


... AOC LM-800 18" LCD Panel Monitor

My viewsonic mo9nitor says analog not digital on


To clarify, you know that analog is referring to the VGA 15 pin video input, and digital is referring to the DVI video input, right? You can't have the digital video unless you use the DVI input, which requires a DVI output from your computer (and a ... ViewSonic Computer Monitors

No signal analog


Press the front screen button that has an arrow. It will be switching from analog to digital and digital to analog if you press it again. ... ViewSonic VX2235WM Monitor

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.


OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

No Signal after switching from digital input to analog vice-versa


What type of video connection is on the graphics card?\015\012Test the monitor on a different computer to determine if the monitor is functioning properly. ... Acer X193W LCD Monitor

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Samsung lcd monitor 153V has no display power indicator (green) is ok found 1 ic AE3U1T burnt. is this ic available or has the psu and backlight panel pcb to be changed.. [email protected]


Samsung 153V LCD Monitor Power Supply Repair Tips\015\012 \015\012Troubleshooting Samsung 153V LCD power supply is just like troubleshooting those CRT type. This monitor came in with no power symptom. ... Samsung SyncMaster 153V 15" Flat Panel LCD Monitor

LG Flatron W2252TQ Monitor stuck in digital power saving mode


Raymond, (did) you solve the problem?i've got exactly the same problem and i've read more similar complaints on the internetgriris ... LG W2252TQ Monitor

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

LG FLatron W2252TQ Not working properley in DIgital mode.


... Computer Monitors

My picture is smaller than the screen size.


Dear User,\015\012\015\012This usually happens by selecting the wrong screen resolution or the resolution not supported by your Monitor.\015\012However you can solve this by getting into the "Safe Mode" .\015\012\015\012 ... Samsung SyncMaster 2233BW 22" LCD Monitor

Samsung syncmaster 730b blinking. switches from


Oct 23, 2009\015\012- This is how it went for me..I have a Samsung SYNCMASTER ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4059 seconds