Having problems with your Computer Monitors ?
Sceptre LCD Monitor
\015 Hi. I missing a power adapter that goes to my LCD Monitor and i cant find one online anywhere. It's a 12v 2.5a DC which i figured wouldnt be to hard to find but it appears as though no one carries them. I was wondering if its possible to somehow connect the LCD Monitor to the computers power supply. I know this sounds bold and probably stupid but i think there could be a possiblity.\015
I did not have a power adapter for my lcd monitor but after 2 weeks of searching stores, internet and universal adapters I found the power adapter for my specific monitor on ebay. If that doesn't work I would suggest a universal power adapter.
Repair Help & Product Troubleshooting for Computer Monitors
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Screen went Blank (Black) with no Power Indicator
The VGA cable for a CRT monitor is the same as the VGA cable for an flatscreen monitor. The VGA protocol hasn't changed between the two technologies, so if you tried it with a different known working cable and it still didn't work, then it is the mon ... Sceptre X9G-NagaIV 19" LCD Monitor
The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th
Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor
Sceptre LCD - no display
Sceptre LCD - no display?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any que ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor
No picture or power green light just blinks - Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor
Carrizosas, Tell me more. How old? Approx. total "ON" hours of use? Did it display a "bright, crisp, full color text and graphics and pictures the day before? Does this unit have a lay on floor "BLACK BRICK" ac to dc supply, or only a 3 wire line cor ... Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor
22" Sceptre LCD monitor DVI to HDMI problems.
... Sceptre X22HG-Naga Monitor
I have a 20 sceptre widescreen lcd monitor
Have you tried any other monitor connected to your computer since your current problem? Check your connections, make sure your VGA cable/DVI cable are in good condition. If none of that works try to RMA it to sceptre if your still within the 1 year ... Sceptre X20g-Naga III 20.1" LCD Monitor
Sceptre LCD Monitor
I did not have a power adapter for my lcd monitor but after 2 weeks of searching stores, internet and universal adapters I found the power adapter for my specific monitor on ebay. If that doesn't work I would suggest a universal power adapter. ... Computer Monitors
Gateway LCD powers on but has no picture
I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor
Sceptre X9G Komodo IV
I have a 19" Sceptre Comodo display. After 3 years it got the problem everybody complains about. Took it apart yesterday.There are 4 capacitors in a row on the power supply board (it has a socket for the power cord and is covered by a me ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor
Monitor stays on for a few seconds then goes out
This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor
Need Sceptre X20g-Naga III 20.1" LCD Monitor Driver
... Sceptre X20g-Naga III 20.1" LCD Monitor
Sceptre LCD - no display
It may be the capacitors, since capacitors run about $1.50 or so depending on size you may spend a little over $6 total if you already have soldering equipment or a friend with skills. ... Computer Monitors
I have a Sceptre x22 gamer that has been serving me well for about two years. A week ago I started having trouble getting the monitor to ''Wake Up'' after the computer goes to sleep or when rebooting. It has become so bad recently that I had to turn the monitor on and wait 15 minutes before it would start to display anything. I don't think it is an issue with the inputs as there is usually a blue display that comes up whether anything is plugged in or not. Usually you are able to switch modes wh
My problem with my Sceptre 22 Gamer monitor started today. I had a space lcd which I connected and the spare works fine (not a computer or connection problem).\015\012\015\012It sounds like these monitors are somehow engineered to fail a ... Sceptre x22wg Gamer Monitor
I have a Sceptre X7G Komodo II 17" LCD monitor/built-in speakers
You would need to connect the speakers to your computer. There should be a little jack on the back of the monitor marked audio. This will need to be connected to your soundcard jack for front speakers. Once this cable is connected you should have sou ... Sceptre X7G Komodo II 17 in. Flat Panel LCD Monitor
At start-up, Sceptre X7 monitor flashes on, then goes black. Must turn computer on and off numerous time before monitor will stay on. How can this be fixed?
I just found after hooking one of these Sceptres with the exact same problem up to a computer that already had a lcd hooked up and the computers settings were fine that if you go to the MONITORS menue and change the MONITORS time setting from 15 seco ... Sceptre X7G-Naga 17" LCD Monitor
Sceptre LCD - no display
There is 2 caps in the power supply that are blown \015\012I have fixed 15 of these LCD with the same problem. ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor
Monitor turned black
Check some of the other posts as it is probably just a bad capacitor or two and very easy to fix if you can do that sort of thing. I did and mine is back up and running. ... Sceptre 17" LCD Monitor
Screen goes blank
Yes, its not the bulbs, its the inverters that are build right into the power module and all that is wrong with that is one or more bad capacitors (bulging or burst) so don't waste $100 getting a new module from Sceptre, fix it yourself (if you have ... Sceptre 17" LCD Monitor
Sceptre LCD screen ..replace backlite
The lamps are integrated inside the LCD panel. What kind of problem are you haveing with the monitors? see some pictures here: http://s807.photobucket.com/home/ ... Sceptre X9G-NagaIV 19" LCD Monitor
For the past week, when my Sceptre LCD monitor goes to sleep after inactivity, it won't restart immediately. The blue LED blinks every second or so; eventually, the screen begins to flash the display, and then a few minutes after that, will finally turn on. Sometimes the whole process takes five minutes, sometimes an hour. How can I fix this problem? (I can't find the documentation to say exactly what model this is; if that's important, I can look again.)
Hello there Jake.\015\012\015\012Here's your geek-steer ...\015\012\015\012== CLARIFICATION ==\015\012\015\012When you say "sleep", are you certain it's sleep mode, as oppo ... Computer Monitors
Occasionally, when I turn on my computer, my Sceptre X9G-NagaIV (Black) 19" LCD Monitor screen has a dark pinkish hue to it. Adjusting the monitor's controls don't help. If I unplug the monitor from the computer and/or power source & then reattach it, the monitor returns to normal. Since this has happened several time in the last 6 months, I'm wondering whether I need to get a new monitor or if it's something that could be easily fixed? Thanks.
This could be as simple as the video cable isn't connecting securely. You could try replacing the cable or screwing it tighter. We recently had a red tint on an external monitor for a laptop because the cable was loose; since the laptop moved regular ... Sceptre X9G-NagaIV 19" LCD Monitor
Sceptre 17" lcd monitor is plugged in but no power please help!!
Let's rule out the obvious first. It may be that a power surge has blown out the power supply on the monitor but let's check the outlet as well. Plug a lamp into the same outlet that the monitor is plugged into. If the lamp works, the monitor may hav ... Sceptre 17" LCD Monitor
Comes on picture perfect and then reverts to standby. Responds to initial signals from computer then reverts to standby. Switch it on and off and picture re-appears but again reverts to standby.
I have a Sceptre X9* as well, and I was able to fix it with a few capacitors (470uF -- 35V -- 105ºc)*. The capacitors were very visibly swollen on the top. Changed those out and works perfectly now.The inverter capacitors in LCD moni ... Computer Monitors
From where can i find parts for my sceptre LCD 22" monitor?
You can find the parts for sceptre lcd in a computer shop....where they sell all the parts seperately......try this....definetely you will get it...... ... PC Desktops
X7G-Naga Sceptre 17" LCD Monitor
Try your monitor on a different computer and see if you get the same result, if not, there is a problem with your pc operating system and or video card. If you get the same result, get a new lcd if it is not under warranty. ... Sceptre 17" LCD Monitor