Having problems with your Computer Monitors ?

It says there is no signal to the monitor and then it goes 2 slee;


Answers :

Make sure the monitor cable has a good connection to the PC in back. Also, open it up (with the power cord disconnected) and make sure the video card (if it's an expansion card) is properly seated (all the way in) in the expansion slot.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Monitor malfunction, says VGA Input: No Signal and goes to sleep


From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

It says there is no signal to the monitor and then it goes 2 slee;


Make sure the monitor cable has a good connection to the PC in back. Also, open it up (with the power cord disconnected) and make sure the video card (if it's an expansion card) is properly seated (all the way in) in the expansion slot. ... Computer Monitors

Hp monitor cannot switch from DVI to VGA because of sleep mode


... HP Pavilion F1703 17" LCD Monitor

Cpu says no input vga signal, then goes to sleep


The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. I ... HP GX613AA Pavilion A6300F Desktop PC

Gateway FPD1760TFT LCD monitor


Problem\015\0121. turn on computer\015\0122. monitor receives signal, it looks like its working\015\0123. it goes through some steps and then the monitor says "no signal" and kind of stays in limbo with fans running, etc.\015\ ... Gateway FPD1760 17" LCD Monitor

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

No Signal when desktop wants to load


This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

Monitor goes to sleep no input signal only 1 mo old


Normaly the monitor is not picking up the signal from the PC, it could\015\012be VGA cord is not connected, faulty, or the video card is faulty,or\015\012the monitor is not compatible to the PC. It could be one of my\015\012suggestions. Trouble shoot ... Computer Monitors

Powering up problems.


Try using another monitor that you know works. Then try another video card. The fans are running because the computer is running ---but the monitor is not. Green to Amber means monitor is not on.\015\012A lot can go wrong with loose wires that ... E-Machines eMachines Desktop PC

Picture goes black at random intervals


There are 4 c5707/5706 in the inverter transformer driving circuits, the cause of the problem was due to poor solder connection in the bias circuits of the transistors. Make sure to check that after you install the new transistors otherwise you will ... Dell E173FP 17" LCD Monitor

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

Moved computer & monitor and now monitor keeps saying no input signal and goes into sleep mode


... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

It will say no signal - Computer Monitors


I just ran into this same problem. I built a new computer. The old computer was running an nvidia card at 1600x1200. The new machine has a Radion card. The OS recognizes the monitor properly, sets the resolution to 1600x1200 at which time this mo ... Computer Monitors

AOC Monitor says "no signal" and won't wake up!


This monitor refuses to wake up because it cannot find the signal from the computer. \015\012\015\012When the light is amber, force the pc to shut down by holding the power button until all lights go off. Then, after about 10 seconds, p ... Computer Monitors

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

No video signal


That does not sound likely. how old is your computer? if it is more than about 5-6 years, it may have a blown power supply(basically your computer is dead) this happened to my friend's computer while i was there and he blamed it on me, if you think y ... PC Desktops

Flat screen monitor comes up with No Signal


If it goes to NO signal again, its not necessarily the whole Flat screen that is dead. Just replace the Video logic board with a known good one and it should workMost monitors only have 2 or 3 boardsLogic board, Inverter, Power supp ... Computer Monitors

Input Signal Out of Range


I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4857 seconds