Having problems with your Computer Monitors ?

Monitor dark PRoview PL916s

\015 My montior suddenly went dark the other day, went bright again,\015\012thendark and I can't get it back. Using the adjustments does\015\012notwork...tried brightness, contrast, etc. Not\015\012sure why it is so dark. It happened when the screen saver came onbut\015\012this week was the first time ever it didn't brighten up again. Notsure\015\012if this is a driver issue, video card or something wrong withsettings\015\012or the monitor itself.\015

Answers :

Monitor dark PRoview PL916s?\012 This trouble maybe power supply or inverter boards is defective.
\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
\012 if you have any question,please let us know email:[email protected],we sincerely hope we can help you!
\012 you can also check this boards whether suit you:
\012 AI 0088 Proview 860 ALZ M713W Power Supply for PL916S
Try to contact an expert technician of monitor maybe there is a part of your monitor that is already defective, the controller of brightness and contrast.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor dark PRoview PL916s


Monitor dark PRoview PL916s?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any ... Computer Monitors

LCD Monitor goes off after 2 sec.


LCD Monitor goes off after 2 sec?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have ... Proview PL913B 19" Flat Panel LCD Monitor

I have Monitor Proview PL916S 900P It turns on


This seems to be a Windows XP issues as I can use this monitor on my Windows 7 laptop without any issues. I hook it up to a Windows XP machine and it does this.... ... Proview PL916S2 Monitor

Monitor goes blank less than a second after turning on.


Sounds like either there is a bad connection from the computer to the monitor, or the monitor has a faulty power regulator, causing the monitor to overheat prematurely, and shut off. ... Proview PL926WBi 19" LCD Monitor

Where can you get a power supply for a proview pl916s monitor


Where can you get a power supply for a proview pl916s monitor?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find th ... Computer Monitors

Pl916s proview 19 inch flat screen moniter


Pl916s proview 19 inch flat screen moniter?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 i ... Proview PL913S 19" Flat Panel LCD Monitor

Proview monitor won't keep the screen on


Bzinbby1, Hi, I think I know what's wrong. In fact I already know what's wrong! But I want you to do one test to let me know how bad it really is! Here is the test. I want you to reconnect your Proview to an already fully booted "KNOWN GOOD" pc wit ... Proview PL913B 19" Flat Panel LCD Monitor

PROVIEW PL-456S LCD MONITOR TURNING PINK ON ONE SIDE


Chances are that you are not hurting anything with the lower power supply. What is probably happening is most likely two fold.\015\0121. The light bulbs in the backlight circuit may just be wearing out and need replacement, and\015\0122. the lower cu ... Proview PL 566s 15" Flat Panel LCD Monitor

Proview PL926Wbi O.K. I have a proview monitor that went black and iI have been told nits probably the capacitors on the inverter board. I've also been told that the capacitors bulge when they are bad. There seems to be no visible bulging or bad anything on any board,but on the brown side of the smaller board its a little dark brown under the Q5 & Q6 whatever they are. As far as the caps there is no visible bulging.Are there specific caps that go bad. What are ther numbers.


On modern capacitors 2005 or up the capacitors can go bad and not even bulge at the top. I replaced a few in my moms flap panel monitor and found out that there were more that were bad and they didn't show any signs of damage but put your finger on o ... Proview PL926WBi 19" LCD Monitor

Pl916s proview 19 inch flat screen moniter


I managed to solve the same problem by replacing the six 470uf 25v capacitors. I have notice that the old ones has a bulging top. ... Proview PL916S2 Monitor

ProView PL926WBi Hello, I've got a ProView PL926WBi and pretty sure I need either a new inverter board or parts to fix mine. Both fuses are good and +14 and +5 volts coming out of the power supply board are good. Nothing comes out of the HV connectors. Tubes look ok and everything worked fine until one day came home to a dark screen which would not light up. I figured Windows was acting up so I powered all down for a few minutes and restarted. I noticed the monitor light blinking for a bit while


ProView PL926WBi\012 \012 this trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any que ... Proview PL926WBi 19" LCD Monitor

Blue Overlay On Screen


The monitor has to be the problem if you hooked others up with success. Get the monitor replaced. ... Proview PL913S 19" Flat Panel LCD Monitor

How to disassemble 900w


The proview trims have to be slid upwards to remove them once the 4 screws are out of the bottom.\015\012You'll need to lift the top part slighty away from the lcd to allow the sides to slide up.\015\012If you don't slide it , then yes, ... Gateway FPD2275W LCD Monitor

Screen goes dark


It indictes problem with ur crt tube in monitir ... Proview PL926WBi 19" LCD Monitor

19" proview LCD monitor light and signal


How old is this thing? Mine is about 4 or 5 years old... junk it! ... Proview PL926WBi 19" LCD Monitor

Monitor too dark....


Brightness control is through the shortcut keys. You have to make sure\015\012the Gateway multifunction keyboard utility is installed for the keys to\015\012work.\015\012http://support.gateway.com/support/drivers/search.asp?st=pn&param=3501 ... ViewSonic VA702b 17" LCD Monitor

Wierd color issue


Assuming that this monitor is new, it should be under a warranty either with Newegg or the manufacturer. It sounds to me like the polarization film inside the LCD panel itself has a defect. What you are seeing is the "backlight" coming through when ... Acer X193W LCD Monitor

Dark screen my viewsonic vg2021m monitor is dark. One day i looked a t the screen and it was soo dark you can hardly see the screen. When i restart it the screen flashes on the compaq sign then goes dark, then flashes on the windows page,goes dark and the flashes on the sin in page and stays dark. I tried the buttons on the side of the monitor and a box vaguely shows up(again this box is also too dark to see) and i think it says osd locked. Anohter site said to hold the menu utton for 10 seconds


Reset your monitor settings with deafaults with menu.u see some buton on lcd or monitor. ... ViewSonic VG900 19" Flat Panel LCD Monitor

Laptop Screen dark yet computer works with external monitor


Does the fan work ok? and do you have a laptop holder for it or you just have it on a desk ....get a laptop holder for it if you do not have one and as for the rest goto the power mangment area on the computer and see if the monitor might be on sta ... Compaq Presario R3000 Notebook

I have the same issue with my dv1000 "If I press the switch at the top left of the unit ( the one that puts the unit in standby when the lid is closed), the screen comes to life momentarily sometimes for 15 to 20 seconds. I can use with an external monitor and when the screen is dark, I can see that it is operating, but it is too dark to use.". I have changed the inverter and it still doesn't work, how do I check if th einverter I bought as a replacement works and/or is compatible?.


Usually inverters fail in one of the following ways:1. When you turn on the laptop, the screen lights up for a short period of time and then goes dark. You still can see an image but it is very dark, almost invisible and definitely not us ... HP Pavilion dv1000 Notebook

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Dimension of image change when displaying clear or dark image


Same problem\015\012Picked up this monitor about half a year ago, a Viewsonic A91f+, and have been having some issues for a while now concerning what appears to be shifting in the monitor image, but that is about the best I can describe it as.\015\01 ... ViewSonic G790 19" CRT Monitor

Princeton Digital VL1716 monitor - no image and completely dark


Maybe the fuse in the plug socket, maybe the monitor is knackered, maybe a faulty connection to the monitor the computer lead or power lead, if all listed above fail then chuck it in the bin!! ... Princeton Digital VL1716 17" LCD Monitor

Dell E228WFP Monitor failure


To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

Samtron 15" CRT monitor gone dark but readable!


Go to a computer fair and get a flat screen monitor for around $195 dollars. Why even keep this anicent artifact in todays new screens? ... SAMTRON 55V 15" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3101 seconds