Having problems with your X2Gen MG19MY 19" LCD Monitor ?

X2Gen MW19U: Start "Auto Adjusting"

\015 Hi,\015\012\015\012My X2 Gen LCD montior is stating "Auto Adjustment" every 1 minute. Though we are not touching any botton it start "Auto Adjustment". I checked manual and set "Recall" to default company setting but it's not solving.\015\012Can any one suggest solution for this?\015\012\015\012Thanks.\015

Answers :

This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC involved. (Also make sure you are using the proper type of cable - analog/digital - for the connection.) Also suggest switching out cables to eliminate that. Further, you could try to see if the monitor functions properly when attached to another machine. If the machine is not functional and another is, that will confirm that the issue is hardware-based.
\015\012Unfortunately, X2Gen has declared bankruptcy (see http://x2gen.com/) and there is no way to go back to the manufacturer for either support or warranty service. If you are still within a given time frame with either the retailer, or perhaps through a credit card company, this would be your best recourse. Here is the link to the form via which you could file a bankruptcy claim: http://www.x2gen.com/files/Claim.pdf. Hope this may help, if you can't get reimbursed through some other means.\015\012
My experience with this type of issue is that the hardware has gone bad. Particularly with the nature of your problem, it seems that it is not a minor problem, and does not appear to involve drivers or other software-type fixes. If you could get a professional tech to repair it, the cost would most likely be more than replacement of the monitor. Sorry for the bad news, but I don't think there is a better solution.

If the monitor continues to behave in the same manner, I think that is absolute confirmation that you have a "nonnegotiable" hardware issue. If not - in other words, if you see something different with switch of connections/machines, there could be a graphics card/driver or other issue that we could work on further.

Please post back if you need additional assistance, or this does not answer all your questions. Otherwise, thanks for using and rating FixYa!
Repair Help & Product Troubleshooting for X2Gen MG19MY 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

X2Gen MW19U: Start "Auto Adjusting"


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Samsung 731N Auto Adjustment


Samsung told me to push the menu button and then the one with the arrow on it (4 fromt he left) and hold that one down for like 20 seconds. It seemed to work but I am not sure, we will see if it continues to work, if not they said they will get it r ... Computer Monitors

Auto adjusting My monitor keeps going to auto adjust over and over how can i disable it or shut it off? I have the X2gen MW22U and made the mistake of pressing the auto button and now all it wants to do is auto adjust. I can't seem to get it out of auto adjustment no matter what i try to do and the manual is worthless for info. got any suggestions?


Try wiggling the auto adjust button on the front of the monitor, it sounds like the button is jammed against the switch causing it to auto adjust over and over. ... Gateway FPD2275W LCD Monitor

New computer won't start up stuck in auto adjustment mode


You can ask the computer tech what he did to fix you computer and post that info here.Or, check out this tutorial on starting in Safe Mode to find and fix problems. ... PC Desktops

Auto Adjust Every time I turn off and then turn on my Monitor it auto adjusts. Also if I restart my computer again it auto adjusts at the start up. How can I disable the auto adjust feature?


I have found a way to stop flickering of auto adjust - press the menu key on your monitor -factory reset-menu button-all settings. That has solved my problem and hope it helps you. ... ASUS VW192S Monitor

Problem in Auto adjust mode


Auto Adjust work on the basis of resolution to which Windows set. It occurs mostly if Video drivers are not installed. Please check and install video drivers and also try to change screen resolutions from display properties in control panel..... ... Dell E176FP 17" LCD Monitor

Having problem with buttons they are not working


The monitor thinks the "AUTO" button is depressed continuously. If water or something got into the button membrane and shorted it out it could cause this to happen. You would have to open up the screen to try and clean the buttons but that's not a ... Samsung SyncMaster 540N 15" LCD Monitor

My Screen is making a high pitched squeeking noise.


Might be a bad capacitor ... Westinghouse L2046NV Monitor

BenQ fp767 keeps auto adjusting


... BenQ FP767 17" LCD Monitor

Always says: Auto Image Adjust


These are the allowable resolutions and refresh frequencies for your monitor.\015\012\015\0121280 x 1024 @ 60, 75 Hz\015\0121024 x 768 @ 60, 70, 72, 75 Hz\015\012800 x 600 @ 56, 60, 72, 75 Hz\015\012640 x 480 @ 60, 75 Hz\015\012720 x 400 @ 70 Hz\015\ ... ViewSonic VA703B LCD Monitor

Pop up auto adjust in prograss


I had the same problem with my HP LCD. I'll turn on the monitor and it will run auto adjust and set everything to the max making the screen very bright. What I did was remove the button panel board and put it back. Everything works fine since then. ... Dell E173FP 17" LCD Monitor

I have corrupted files in Windows XP and EMachines provides "Restore CDs" But with my NEW LG widescreen monitor the instructions on how to startup the CDs is actually cut off. So when I attempt to load the CDs, all I get is a listing of the folders and files on that CD...it does not AUTOSTART. So there must be a FUNCTION KEY or something to get the program to start, so it can reload a new version of XP on the hard drive. Anybody know how to possibly repair or rewrite Windows XP on this computer?


Hi there! if you can configure your bios set up and go there, priority yout cd rom as first on the list,2nd your hard drive, in able to start and configure your windows set up promptly.How to open your bios set up,after switching on your pc, press F2 ... E-Machines W3052 PC Desktop

How do i do a full reset? I would like it back to factory settings.


Click on Start, All Programs and click HP My Display, Again Click HP My Display and than you can follow the on screen display to reset it.Also you can use the front panel buttonsPower Turns the monitor on and to standby or sl ... HP w1907 LCD Monitor

PC - Immediate Auto-Shutdown


Hi sk8teroy, it could be either. Desktop systems & notebooks will shut down all by their self’s if the CPU starts to over-heat. This is a fail safe so the system does not fry. Go to the link below & download the eSett ... Acer Aspire SA20 PC Desktop

Hi I have been happily using my HP 2159m LCD monitor for approx 3 months now but I accidently pressed the "Auto Adjust" button & it moved the whole image down. (My start bar has disappeared) & no matter what I do, I just cant recenter it. I have tried adjusting vertical position in the image control menu but it doesnt even move. I have tried pressing the "Auto Adjust" button again, all to no avail. Its centers OK in different resolutions but, I want to use the recommended Resolution of 1920x1080


Friend,\015\012\015\012Reboot in Safe Mode. Go to Control Panel->System->Hardware->Device Manager->Display Adapter. Here select the display adapter and delete it. Then reboot the PC. Go again to the same Device manager and select Ac ... HP 2159M Monitor

Planar 2010M auto adjust


This may be related to a power supply problem that these monitor have.\015\012 \015\012I think you need to fix the power supply board inside the display itself. It's giving the logic board and backlights fluctuating power and they have w ... Planar PL2010M 20" Flat Panel LCD Monitor

Cannot turn off Auto Adjustment... message.


We have several of these screens and last week 2 of them started to exhibit these faults after 3 years of use. We have never had a problem with any of them before. ... Relisys TL565 15" LCD Monitor

Brightness and auto adjustment pops up comes forcely


... Samsung T190 19" Widescreen LCD Monitor

Auto image adjust


This problem has existed for 4 or 5 years, and I've seen various solutions posted with inconsistent results. Did the problem beginafter a power failure or surge, by\015\012any chance? In my experience, this can be related to a setting in the BI ... Computer Monitors

Samsung syncmaster 152s repeatedly showing auto adjustment ,blink


... Samsung SyncMaster 152 (Silver) 15" LCD Monitor

Auto Adjustment keeps turning on every few seconds


Hi, I have a HP VS17E Monitor and it does that too only on any window, boot screens, cd boot setups, windows environment, ext. Anyway I was able to fix my problem at least in the windows environment by simply download HP MY DISPLAY software bu ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Auto-adjust not correctly fixing display


Was it always like this if it want go to the start botton on windows all programs accessories then system restore restore it to the date it was normal if that dosent work then re install the disk that came with the monitor if there was no disk try pl ... AOpen F70PS 17" Flat Panel LCD Monitor

Screen monitor images on the righ side is not showig.


Hi afcarrillo,This could be a simple resolution problem. By that I mean that the resolution is set too low, therefore putting things off screen. Here's how you change the resolution:Windows XP Right click the Deskt ... Acer Computer Monitors

I have a Dell monitor and the text is blurry and fuzzy, how do I fix this?


This is actually from dell support website.. hope it will correct your problem...\015\012\015\012\015\0121 Ensure the correct resolution is set for the monitor. Flat panel monitors display the sharpest, clearest images when set ... Gateway FPD2275W LCD Monitor

My desktop is not centered and the fonts are too big. Also my Start button and bottom toolbar have disappeared.


Sounds like your resolution has been set too low.\015\012\015\012Firstly, i'm going to assume you have a 17" LCD monitor, and that you are running Windows XP. (what a guess!) =-]\015\012\015\012Generally, you'd want to right-c ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5010 seconds