Having problems with your WYSE 50 Terminal ?

The wyse 50 terminal does not work properly

\015 1.the wyse 50 monitor displays the following information when computor off.\015\012 frst line: FDX\015\012 second line: a long line\015\012 third line: a cursor\015\0122 a known good wyse 50 monitor displys a cursor only when computor off.\015\0123 the monitor can not displays the data inputed by the computor, but good one can.\015\012thank you very much for your help\015

Answers :

Hello,
\015\012
\015\012Wyse 50/60/150/160 monitors were my specialty!
\015\012
\015\012From what you were explaining it seems to me that you have a bad internal battery and it needs to be changed and a factory reset/ calibration needs to be performed.
\015\012
\015\012I can repair wyse terminals at my facility if you like. The repair cost is not that high and we can also perform the regular repair and adjustments on all wyse monitors if needed.
\015\012
\015\012Please contact me if you have any questions.
\015\012
\015\012Thanks
\015\012
\015\012Rory Cardenas
\015\012Midrange Repair and Parts
\015\012Alsip IL 60803
\015\012708-597-4222 x240
\015\012[email protected]
\015\012AOL IM: RORYMRP
Repair Help & Product Troubleshooting for WYSE 50 Terminal

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The wyse 50 terminal does not work properly


Hello, \015\012\015\012Wyse 50/60/150/160 monitors were my specialty! \015\012\015\012From what you were explaining it seems to me that you have a bad internal battery and it needs to be ... WYSE 50 Terminal

Monitor looses contact with computer


Check the video card if it is properly inserted. ... SAMTRON 55V 15" CRT Monitor

Monitor Samtron after 10min. looses contact with computer


This problem is caused by the Novatek chip on the video board. Soldering a 50 Ohm Resistor across pins 5 and 6 of this chip resolves the problem on both the Samtron and the Samsung monitors. I have just corrected one of these last night by this means ... Samtron Computer Monitors

Gateway GT4022 has issues powering up and restarting


1.Yes the Power On switch is okay. (PS. If you hold down the Power On button for 10 seconds on any computer, it will turn off)2.The heatsink held down by springs on the Northbridge, and Southbridge chipsets, is an excellent idea. Wo ... Gateway GT4022 PC Desktop

My daughter works at home as a Customer Service Rep. for Generation Networks (Ancestor.com). She has a terminal from work and it is configured for her to work from home. She has done that for over a year with a modem from Qwest, an "Actiontec® Wireless-Ready DSL Gateway: Model GT701-wg". But now for the last 4 days she can't log into work. She got a new terminal from work and it is responding the same, she is still not able to log in. She plugs her laptop into the DSL line and it works fine. Soo


"She plugs her laptop into the DSL line and it works fine."NO NEED TO TOUCH THE MODEM if the INTERNET is working fine. The Terminal from work just needs to be set-up properly with the router. Ask Generation Networks tech support about the ... PC Desktops

The system fan is missing or is not working your system has been halted in order to avoid any damag


Good day sir hi, check to see if the power supply, and processor fan is working properly, does it blow hot air. Check your processor fan, make sure that the fan is connected to the proper power port. There are two types of port, the 3 terminal port, ... HP Vectra Xe320 PC Desktop

Keyboard and touchpad


Have you attempted to use an external mouse? - USB - if so does that work?\015\012if it does - Click on START - Control Pannel - Keyboard (& Mouse Respectively) - Click on the hardware Tab - Select the relevant Key Board, Click on Propert ... Toshiba P25-S670 Notebook

Left speaker terminal on the sub doesn't work properly


This is common with the type of powered speakers where the IC package that drives the speakers (the amp) is getting to hot and shuts down. Usually it is damaged and not reversable. There is a lot of reports of this same model loosing one channel or p ... Logitech Z-2300 Computer Speakers

LAPTOP /no power


It states you are not getting no power on your lap top computer :\015\012\015\012No power or computer does not turn on\015\012Cause:\015\012\015\012No power from the computer can be caused by any of the below possibilities.\015\012 ... Toshiba Satellite M40-S417TD Notebook

Problemtic sound deompression sofware for My First Amazing World


\015\012\015\012\015\012\015\012Issue\015\012"[1058]: The sound decompression software has not been installed properly."\015\012\015\012Description\015\012This is a known issue with the Dorling Kindersley software titles and Window ... Dk Multimedia My First Amazing World Explorer/History Explorer Bundle for Windows, Mac

WYSE 3235 thin client needs bios flashed


Holding down the 'G' key while turning the thin client should perform a factory reset. If that doesn't work there is a program called NETXFER that will flash the winterm. You need a PC with a crossover cable or a hub(not a switch) to use the progr ... WYSE Winterm 3235LE (90202401R) PC Desktop

I have had an Optus 3G wireless connection working up to 6 weeks ago, however am now getting "Failed to initialise the modem (dialuppppclientservice.cpp.896). Have made no changes to eeepc during this period. Have deleted and created new network connection but still having same error


What interface does the card use, is it USB? Have you gotten the card working on this computer in the past?First we need to check to see if the device is recognized. When the card is plugged in, do the lights flash? Please open up a termi ... ASUS Eee PC 701SD

Dell dimension E310 CD ROM - not burning cds


Check this out... You might be in PIO which is a transfer mode which is slower than what you really need... Your IDE channels where probably put in PIO from transfer errors so you might have IDE cables that are bunk. Also download Nero demo and see i ... Dell Dimension 4600 PC Desktop

Wyse Terminal I have an old Wyse (WY 60) terminal installed as an elevator control monitor. This unit was recently replaced with a rebuild (by elevator contractor) and everything seems to work however, I cannot get reports to print. Info can be viewed on screen so it is being collected. I suspect problem is in user configuration settings but don't know enough to determine what to change.


Do you have a print screen button, sometimes abbreviated PrtScr on the keytops. I would get the contractor back on site and have them setup the machine so you can print, they left the job unfinished and I would emphasize that when you call back. ... Computer Monitors

I have Wyse V50L termimals that cannot connect to Terminal Server 2008. Connections from XP Remote Desktop Client work fine. The server is configured to not use Network Level Authentication. The V50L terminals can connect if the RDP connection is set to NT4 compatible however, this is not an acceptable workaround since we need support for device redirection (which does not work with NT 4 compatibility settings). Need to know what to do...


Have you tried the latest V50L firmware version? There was a major revision lately?http://www.wyse.com/serviceandsupport/support/downloads.asp ... WYSE PC Desktops

Polk speakers with Windows Vista don't work


I doubt the speakers need a driver. Is there output from the soundcard? Connect the speakers to an alternate audio source, such as the headphone jack of a CD player or radio. If the speakers produce sound, the problem is probably with yo ... Polk Audio AMR50 Computer Speakers

Surround sound speaker outlets are not working


Might be a loose connection problem. A contact cleaner is handy in cleaning the terminals. Try to swap the speaker connections if you don't have a multi-tester to check the resistance of the speakers. If the right front speaker will sound after conne ... Durabrand 5.1 Surround Sound Computer Speakers

Doesn't work on battery - battery is at 100%


The battery terminal has to be worked on or serviced ... Compaq Armada M700 Notebook

Install windows XP


Well this really bugs u out installing Windows XP into a non XP systemAll u need is a slip streamed driver for it.. Now dont be confused.. THE SETUP HAS DETECTED AN ERROR & WILL SHUT DOWN This would be shown when u start i ... PC Laptops

Mouse pad and keyboard wont do any thing, i can plug in a wireless mouse and the mouse will move but the key board still doesent work


Good morning! please check/review the cable connector connections of you're mouse & keyboard, it might be interchanged to its proper port terminal. If still not working, try to use another mouse & keyboard. best regards ... PC Desktops

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

ACER(W~1.SCR has stopped working


Your C drive has become cluttered. Try Check Disk from ACCESSORIES-SYSTEM TOOLS and the chose de-fragment from the same(system tools0. If this does not help, go to start menu and remove all non-essential programs which are not needed all the time, li ... PC Desktops

RE: Emachine T5048 slow from Ducttapeuser


The one main cause of this type of problem is usually heat. You say that the fans are working, did you check to see if your power supply fan is working? Do you feel the temperature inside the PC to be warmed then luke warm?\015\012Also, McAfee ... E-Machines eMachines Desktop PC

Monitor stops display


Sounds like classic symptoms of capacitor failure.\012 Old thread, but in case anyone else is still looking for an answer, the problem is probably bad capacitors on the power board. There was a world-wide problem with capacitors in the early 2000 ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6524 seconds