Having problems with your Westinghouse L1975NW Monitor ?

Monitor gets signal but isnt lighting up i have a old monitor connected and is working fine with it any ideas

Answers :


The Westinghouse L1975NW monitors have a bad habid of blowing the backlight power supply. When this happens the power light will be on but no picture on the screen. We have posted on our web site a free step by step repair so you can get back going. If you can solder then you can repair it yourself. Check our web site at:
www.ccl-la.com/badcaps.htm for the repair guide. If you don't want to do the repair yourself we do have a repair service available for $30 plus return shipping. If you have any questions or need us to do the repair contact me at the email address below.

I hope this helps, If so please rate our solution.

Corporate Computer
[email protected]

- check monitor/ combine with another pc

- could be a graphics card problem

- if driver is needed for monitor, get it from cd or hardware support / google the net, install still using old monitor,
replug new device and reboot
Repair Help & Product Troubleshooting for Westinghouse L1975NW Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nvidia Vetro Geforce 6800GT on E510? Need help setting up max displays MD 219 dual displays

... Max Displays MD-219 (Gray) 19 in. Flat Panel LCD Monitor

Gateway Monitor keeps going black

Alicia, Your monitor digital board is OK. The problem is with the power supply/ Inverter board(s) in back of the LCD/LPD Panel that you look at. You will need to question Gateway to see if they have a swapout program where you send them $30-$60 and y ... Gateway FPD1760 Monitor

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Hello, I have a Gateway model GT5662, stock setup - Will not boot

Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

LG StudioWorks 700s Monitor NO SIGNAL

First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

Nothing on the screen at startup

If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

LCD Screen blinks on & Off at start up up-to about 10 minutes

Okay, forgive me if I go over covered ground but reading the post, I only see your responses, not what was recommended. From everything I've seen the problem lies in one of the following areas.\015\012\015\012\015\012 ... ViewSonic VX922 19" Monitor Flat Panel

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7

Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

X191w blank screen after 2 seconds

Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Hp vs17 has white screen at boot. I have eliminated the chord from the tower and the tower works fine. I have audio, no video. Only a white blank screen. It does not blink or flicker. It just stays white. It happened all of a sudden. I worked yesterday morning, turned off the system for work and on booting after work, well y'all know the rest.

There are three choices here...bad screen, bad connection, or bad video card, if the card is integrated onto the motherboard, then that part of the motherboard could be bad. If you have access to another monitor or a TV with a vga input, try the comp ... HP Vs17 17" LCD Flat Panel Monitor

Dell E228WFP Monitor failure

To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz

Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Signal out of range

Hi, these monitors are dropping like flys and it's due to power supply problems. There is a power supply that needs to supply 5v, 12v, 24v. The 5v and 12v is for the logic boards and the 24v is for the back light. On other boards people have tr ... Soyo DYLM1798 Monitor

Dell Dimension 8400 will not boot period

If you have any idea of opening the computer and try to tighten all the cards once and than try to reboot it. The beeps mean that there is some hardware thing which is loosen. So try to tighten all the cards ram all the wires as much as possible. ... Dell Dimension 8400 PC Desktop

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

I've been trying to use s-video cable to connect

\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

My monitor says there is no signal from my new Dell Studio

I had the same problem and i used the DVI cable and it worked! The VGA slot on the computer was covered and it had a x on it. Maybe they didn't want us to use it... ... Dell Studio Slim-Tower Desktop Computer

Viewsonic VP930b color problem - Red tint

Can not get the red out of my monitor. I have tried all the settings that are offered from the front of panel. ... ViewSonic VP930b 19" LCD Monitor

Monitor has no picture

Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel

X2gen mw19u 19'' widescreen monitor going black

X2GEN - MW19U, same problem as described in the other posts. A week ago after a reboot it did not turn on. Pressed the power button, it turned off. Pressed it again after about a minute, all was fine until this morning. Same as before except t ... X2Gen MG19MY 19" LCD Monitor

Westinghouse lcm 19v5 won't power on period

I have a Westinghouse LCM-20v5 that would have problems powering on, and then it would power on for about 1/8 sec and lose the picture. It died 1 year and a few months after purchase. That sucks. LCD screen problems are often caused by the interna ... Westinghouse LCM-19v5 Monitor

DVI cable not working

If you still have your old monitor plug it back in for a bit and load the drivers for the new monitor (from the disk which came with the new monitor). Right click on your desktop and choose properties and set your display resolution to something lik ... PC Desktops

Dell LCD monitor has flashing lines, color distortion; random

I'm not an expert but I will give you a couple suggestion, who knows might help might not. It's worth shot.\015\012 First open your internet explorer, when webpage comes up, go to the top of you screen and click Tools, Internet Options, Advanc ... Computer Monitors

Blank screen after boot up

This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

StudioWorks 700s Monitor No Signal

Try to connect the monitor to a different desktop/laptop, to see if it works at all.\012\012Try a different monitor on your computer, to see if the video-card in your computer is the problem.\012\012Or, spend $50 to $100 to bu ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1607 seconds