Having problems with your Westinghouse L1928NV Monitor ?

L1928nv monitor help

\015 You answered one of my old questions on the same monitor, you were saying something on the monitor cables might not be connected to the cpu right. i don't know what you meen by that. see all i got is the cable that runs to the monitor to the back of the video card. and the video card just hooks into the motherboard, so if you don't mind would you please be more specific on what you meen by the monitor being hooked up to the cpu.thanks a lot man.\015

Answers :

The cable which connects the video card from the monitor in that there may be some problem ....
just try replacing that with another one ....

or your video card might not be connected correctly on the AGP or PCI express slot .... just remove the video card and reconnect it again & then have a check it will work if there is no problem in the cable means .....

if you persist the same problem then there may be some problem in the video card port ... just have a check with that when you remove the video card do does it looks if you see any burnt marks on the video card means there may be some problem in the video card or there may be some capacitor gone on the video near the port so it might not be working ...

so just have a check with these correctly ....
if all the above are in good condition then ....
if you persist the same problem then there is some problem in the monitor .... just check the monitor by putting to another CPU .....

any doubts you can reply me
i am always here to assist you
thank you
rate my solution as fixya ....

Repair Help & Product Troubleshooting for Westinghouse L1928NV Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

L1928nv monitor help

The cable which connects the video card from the monitor in that there may be some problem ....just try replacing that with another one ....or your video card might not be connected correctly on the AGP or PCI express slot .... jus ... Westinghouse L1928NV Monitor

Westinghouse L1928NV Monitor won't turn on

Hello,You have a monitor with a common problem. After a few years some LCD monitorswill\015\012blow a power supply. The problem is caused by parts called capacitors\015\012overheating in the confined space of he monitor. If you are good a ... Westinghouse L1928NV Monitor

Sansung monitor going black!!

Hello, I have done some research about your product. If you have checked all the cables and connections to make sure the pins are not bent and cables are connected properly, etc. You stated that you hooked the monitor up to a different comput ... Samsung SyncMaster 216BW Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz

Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Monitor won't come on

Start with the basics, so check the fuse in the plug, change wall sockets and if this doesn't help unplug the monitor and hold down the monitor's power button for 30 seconds (time it, it'll seem to take forever).\015\012\015\012If non of t ... PC Desktops

Screen So Bright I Can Barely See Anything...

Unfortunately the problem is the monitor has gone bad, more specifically and likely is the backlight which is used to light up the monitor. You could fix it by replacing the LCD, but you can get monitors cheaper than a replacement LCD so it wouldn't ... Computer Monitors

I'm trying to help a handicapped friend of mine with his monitor/computer problem. He has a Samsung 920 NW monitor. The computer boots up but the monitor immediately goes black. The blue on/off button on the monitor is not blinking. I can turn the monitor off then right back on and see the screen for about 1 second when the screen goes black again. Help?

Here's a good link to a troubleshooting guide for monitor problems that may help you to correctly diagnose the cause. Another ... Samsung SyncMaster 920NW Monitor

Blank Laptop Screen

The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Monitor goes blank automatically after about 40 minutes...

Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Moniter keeps blinking analog and digital at the

This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv

Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

What voltage power cable/transformer do i need for an "EXtreme" monitor

I don't know why it specifically say 100 - 240 VAC (That's AC Input), then label the jack as DC IN. So I'd guess it will run on either. Is there a jack or connector for the AC in as well? Most DC inputs are indeed around 12 Volts, this is so they can ... Videoseven Slim Line L15CM (White) 15" LCD Monitor

Acer's x193w killing my eyes..please help

First off, LCD monitors have what is called a 'native resolution' and that is why it is recommended to be at 1440 x 900. That is the resolution they work best at. My first suggestion is to try to move the monitor closer to you. If that is not possibl ... Acer X193W LCD Monitor

Monitor black screen

I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank

The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

Dell m992 crt monitor

If it's getting no signal, make sure the monitor is set for the correct input. This would be either analog (if your cord has blue ends) or digital (if the connectors are white). Depending on wt yhat your monitor is, a button on the monitor will help ... Dell M992 19" CRT Monitor

Dell UltraScan P1110 flat-screen monitor BLURRY?

The button you pressed is the reset button and according to the documentaton "returns the monitor to factory defaults".\015\012\015\012Here's a link to the Dell support page for your monitor:\015\012\015\012 ... Computer Monitors

My computer screen is white

Here are the things I would try:\015\012\015\012First, if you have another monitor I would plug it in to see if the problem is actually your monitor or something else. If you don't have access to another monitor then I would try to reset ... Epson Viewsonic ViewPanel VE150M Monitor

My Samsung 913t says "Check Signal Cable." HELP PLEASE!!!

Cheap CRT monitors can be picked up at Thrift Stores, quick and cheap way to test your computer output. ... Samsung SyncMaster 191T 19" Flat Panel LCD Monitor

Monitor 'no signal detected' issue.

Try going to control panel, click hardware and see if you see the monitor if so click on and click refresh. Make sure you have the disk forthe monitor in case it asks for it. You can also go online and download them first. ... Computer Monitors

No' it's not powering up at all now, can you help' after changinng ac-adapter & battery

Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

Cant get it to turn on/ panasonic CF-51 toughbook laptop.

Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

I have a Princeton VL1918 LCD monitor. Need help

Hello,\015\012\015\012You have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of he monitor. ... Princeton Digital VL1918 Monitor

My Samsung LCD TV/Computer Monitor just went deadOnly 14pins/15

It sounds to me like the monitor/TV needs to either be replaced or sent in for repair but there are a few things we can test. \015\012\015\012The first thing would be to set the TV to connect a cable line to the TV and see if you can get ... Samsung SyncMaster 204B 20.1" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6457 seconds