Having problems with your Westinghouse 22" Widescreen LCD Flat Panel Monitor ?

Hi, I have a new L2210NW monitor. The serial number is 5520B82002975. I have used it for a week without any problems. Only today I turned it on and picture is faded. I am using a DVI cable plugged into a Dell E3400 laptop via a Dell docking station. It has the DVI signal. I swapped to VGA to see if it was the cable. Same result. I checked the power cable is connected properly and the jacks. Disconnected everything and put it all together. Same result. I checked all the OSD s


Answers :

Try to set your display resolution to the maximum.
one more thing, try to configure your display to use the DVI monitor.
since the unit worked well in the few weeks, it could be an updated software conflicting with the device drivers. try to restore your registry settings to the date when it was still working fine. Lastly, if all the things were'nt working above, try to see if there is a manual display buttons that you might have accidentally pressed causing the picture quality to fade.

Regards
Repair Help & Product Troubleshooting for Westinghouse 22" Widescreen LCD Flat Panel Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Solid amber power light


Your Monitor is not connected properly http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspxConnecting Your Monitor1. Turn off your computer and unplug the power cord.2. Connect the white conne ... PC Desktops

Inoperative monitor This has now (4 years old - 3 months apart failures) happened on both monitors: Screen displays what Dell calls Self Test Feature Check. This box with 2: Digital Input.... with 4 color bars roams across the dark screen. Online Dell support talks about Cables and video card from computer, but when the inop monitor is moved to the other Dell computer, same problem. When any good monitor is moved to the computer that had the inop monitor, every other monitor has worked. "Digital


Here are a couple things to try.\015\012\015\0121. try the input select button on the monitor (The minnus button) without pressing the OSD menu button 1st, see if it changes to analog.\015\012\015\012 ... Dell UltraSharp 1703FP Flat panel TFT 17" Monitor

Hi, I have a new L2210NW monitor. The serial number is 5520B82002975. I have used it for a week without any problems. Only today I turned it on and picture is faded. I am using a DVI cable plugged into a Dell E3400 laptop via a Dell docking station. It has the DVI signal. I swapped to VGA to see if it was the cable. Same result. I checked the power cable is connected properly and the jacks. Disconnected everything and put it all together. Same result. I checked all the OSD s


Try to set your display resolution to the maximum. one more thing, try to configure your display to use the DVI monitor.since the unit worked well in the few weeks, it could be an updated software conflicting with the device drivers. try ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

DVI problem with latest drivers


Do you mean GA-7VAX? Make sure you update all your drivers from here: http://tw.giga-byte.com/Support/Motherboard/Driver_Model.aspx?ProductID=1392 ... Dell UltraSharp 1900FP 19" Flat Panel LCD Monitor

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

Dell LCD monitor has flashing lines, color distortion; random


I'm not an expert but I will give you a couple suggestion, who knows might help might not. It's worth shot.\015\012 First open your internet explorer, when webpage comes up, go to the top of you screen and click Tools, Internet Options, Advanc ... Computer Monitors

I have just installed a Acer LCD #X223W moniter. What do I need to do to get my speakers to work with it? Is there a missing port or do I need a new cable. This moniter has a HDVi cable but the Computer doesn't have a port for it? What or which way do I need to go? Thank You for any help you may have!!! RG


Did you give the correct model of the Acer monitor you have? When I looked up the X223W monitor, I see a monitor with a DVI-D port and VGA port. Only the VGA cable is usually included in the box. If your computer has a VGA port (most olde ... Compaq Presario 5000 PC Desktop

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

My Kogi L7EH-TA monitor will not function when hooked to my new Dell Inspiron 537.


Do you get a No Signal on the monitor? IF so, the problem is in your computer, or you have a bad monitor cable. (Cable from monitor to computer) Try the monitor on a known working computer, and use that working computer's moni ... Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

ViewSonic VG2030wm speakers not working


You are unable to get an image on your ViewSonic monitor, first check\012that the necessary cables are attached correctly and that the proper\012drivers are installed. ViewSonic offers drivers for download directly\012through its website (see Resourc ... ViewSonic VG2030wm LCD Monitor

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

Dell 410XPs + Dell 3007WFP monitor issues


The 7900GS does have Dual-Link DVI connectors, but many of them did not support full Dual-Link capability that is required for the 30" display.\015\012\015\012Your Video Cards may not support the display, I would try them elsewhere or rep ... Dell Dimension XPS PC Desktop

Dell m992 crt monitor


If it's getting no signal, make sure the monitor is set for the correct input. This would be either analog (if your cord has blue ends) or digital (if the connectors are white). Depending on wt yhat your monitor is, a button on the monitor will help ... Dell M992 19" CRT Monitor

When turn on computer, screen is black, - Dell Dimension 8400 PC Desktop


Probably itz either minor case of improper ground/cpu fan/faulty power cable..or major case of faulty or defective main board/ram/daughter or addon card(s)....plz do check the following as in order:.. ... Dell Dimension 8400 PC Desktop

ViewSonc VX924 LCD Monitor


Check the information at Viewsonic's website regarding their warranty:http://www.viewsonic.com/support/warranties/limited-warranty/If you have your proof-of-purchase and it shows the monitor is less than a year old, it would b ... ViewSonic VX910 19" LCD Monitor

Dell Dimension 5100 will not power up. Was working fine, turned power off, will not turn back on. Power supply tested OK, tried different power switch and ribbon cable connector, replaced mother board battery. Nothing worked. LED on motherboard indicates power.


Have you checked your monitor? Try your monitor on another PC and check it is OK. Once you change the MB battery you effectively "Kill" the PC, as all the settings in the BIOS are removed and must be reprogrammed. You must enter the BIOS, and select ... Dell Dimension 5100 (D51L1) PC Desktop

Dell Inspiron Vostro 530s won't boot.


Hi,I work for Dell, If the power button led light is flashing amber or amber (the Power supply is faulty) The Yellow light you saw inside the motherboard is the "Flea Light" (that is one way you could check if there is still power on the ... PC Desktops

Dell xps 420 won't power up - Dell XPS 420 (dxcwqc1_4) Intel Core2 Q6600 Quad-Core (8MB L2 cache,2.4GHz,1066FSB) 1000GB/2000MB PC Desktop


I gotta know 1st what is ur system\015\012configuration..is all ur system is getting power on..is there any sound coming out of the system..assuming that the bios has not been flashed in a wrong\015\012way & u r a professional.. ... Dell XPS 420 (dxcwqc1_4) Intel Core2 Q6600 Quad-Core (8MB L2 cache,2.4GHz,1066FSB) 1000GB/2000MB PC Desktop

Completley blank screen on boot up


You didnt mention the brand of the screen. this may be a input issiue if it has DVI and Svga and so on. check the menu to see if the monitor can be shifted to the other source. take the cable off and make sure no pins are loose or bent. then put cabl ... NEC PowerMate ES SlimLine PC Desktop

I have just installed a crucial x1600 pro graphics card,when i fired up the computor the monitor displayed multi coloured vertical lines and a box appeared saying it was in analog mode, how do i configure the targa visionary monitor to digital mode. regds A Gough


I'm assuming "it" is the monitor rather than the video card, and that you are using some flavor of windows as your operating system. 1. Digital vs Analog mode is determined by the cable input plug on the monitor that use. Your cable fr ... PC Desktops

Monitor Problems We have a Dell PC that supports 2 monitors. Since July of last year, we've been successfully running one 20" LCD via a DVI cable and one CRT monitor using its integrated cable. Out of the blue, the LCD went dark. The green light turned to amber and nothing. I ended up removing the DVI cable from the LCD and using a regular monitor cable instead and it worked fine. The only trouble now is that I can only use one monitor instead of two. Do you think it's a bad DVI cable (do they j


Borrow a DVI cable from some friend and test it, just in case.If you want to use multiple monitors, ensure you are using the right settings. Go to control panel>> Display, open the Display properties box, click the last tab at ... Dell E207WFP LCD Monitor

MONITOR ISSUES THE PICTURE ONLY STAYS ON FOR A FEW SECONDS, AND DOES THIS EVERY TIME I TURN THE MONITOR ON. THEN IT GOES BLACK


There could be a problem on the monitor itself if it frequently turns itself off, try to unplug the VGA/ DVI cable and check if you can see the self test feature. If not, the monitor needs to be replaced. If you are still covered by the warranty, jus ... Dell E152FP 15" Flat Panel LCD Monitor

Dell 1905 stayed in analog power mode, bought a new LG2250 set it up and it stays in analog power saver mode. I can't see anything on the computer


Firstly check the connecting cable from the screen to the computer at both ends. Ensure that the thumbscrews that keep the connector in place are tight. Has the PC been moved recently? Any chance the cable could have been put in the wrong place ... LG Flatron L1750S 17" LCD Monitor

Moniter My moniter will not stay on and when I turn the computer back on, it says AVG and has the picture of the AVG cord. I assumed that the AVG cord had a short in it or something but when I bought a new one, it still did not work.


First please check whether the Monitor powering ON or notthe see the colour of light of the monitor i.e, its green or orange or not glowing next see that all the lights showing but constantly flickering or else just see u r VGA or DVI Cable whi ... E-Machines eMachines Desktop PC

Monitor screen changes from regular color to a green tinted screen?


My wife just bought a Dell LCD monitor at a yard sale. I checked the connections and the only thing that works it bending the VGA cable around. It looks like one of your wires inside to VGA cable has split. The only way to fix the problem is either f ... Dell 1503FP 15" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9561 seconds