Having problems with your Westinghouse 22" Widescreen LCD Flat Panel Monitor ?

Out of Range message displays when PC boots

\015 The only thing that shows up on the screen when booting is an "Out of Range" message. No other information is displayed.\015

Answers :

To resolve this behavior, either change the refresh rate, or change the video adapter settings.

\015\012To change the refresh rate:
\015\012
    \015\012
  1. Restart\015\012the computer, and while it is restarting, press F8 until the Startup\015\012menu appears. Press 3, and then press ENTER to start the computer in\015\012Safe mode.
  2. \015\012
  3. Right-click the desktop, click Properties, and then click Settings.
  4. \015\012
  5. Click Advanced, click Adapter, and then click Adapter Default from the Refresh Rate list.
  6. \015\012
  7. Click OK, click OK again, and then click Yes to restart the computer in Normal mode.
\015\012\015\012You can set the colors and screen area to your preferences under Display Properties.\015\012


\015\012\015\012To change the video adapter settings:
\015\012
    \015\012
  1. Restart\015\012the computer, and while it is restarting, press F8 until the Startup\015\012menu appears. Press 3, and then press ENTER to start the computer in\015\012Safe mode.
  2. \015\012
  3. Right-click the desktop, click Properties, and then click Settings.
  4. \015\012
  5. Click Advanced, click Adapter, and then click Change.
  6. \015\012
  7. Click Next, and then click Display a list of all the drivers in a specific location, so you can select the driver you want.
  8. \015\012
  9. Click Next, click Show all hardware, and then click Standard display types under Manufacturers.
  10. \015\012
  11. Click Standard Display Adapter (VGA), and then click Next.
  12. \015\012
  13. Click Yes, click Next, click Finish, and then click Yes to restart the computer.
  14. \015\012
  15. After the computer starts, right-click the desktop, click Properties, and then click Settings.
  16. \015\012
  17. Click 256 colors, click Apply, and then restart the computer.
  18. \015\012
  19. After the computer starts, click Start, point to Settings, click Control Panel, and then double-click System.
  20. \015\012
  21. Click Device Manager, click View devices by type, and then click Display adapters.
  22. \015\012
  23. Click Standard Display Adapter (VGA), click Remove, and then click OK.
  24. \015\012
  25. Install all updated monitor drivers.
The settings that you have for you tower needs to be changed if you have a old monitor connect that to the tower then right click on your screen go to settings and set it real low once this is done connect the new monitor up and set where you would like it,

The out of range is just letting you know that the settings thats set the monitor can see
Repair Help & Product Troubleshooting for Westinghouse 22" Widescreen LCD Flat Panel Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Out of range message


That message appears when the Windoze display settings exceed the monitor capabilities. If you will boot into windoze safe mode (F8 at boot) and correct the display settings, the message should clear at the next boot. Afterwards you can right click o ... Amptron AMV 17V5 17" LCD Flat Panel Display 500:1Analog 15-pin D-Sub, Digital 24-pin DVI-D Silver with black... Monitor

My ViewSonic computer monitor keeps displaying a Vga Not Support Message upon booting then the message Out Of Range comes up on a completely dark screen. Need Help


It sounds like the computer is trying to use a resolution that the monitor cannot handle. Boot into safe mode by pressing the f8 key during boot up and select safe mode. Once booted, right click on the desktop and select properties. In settings lower ... ViewSonic VA721 17" LCD Monitor

Out of Range message displays when PC boots


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Attention out of range is displayed on ibm 2 74 monitor


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... IBM E74 17" CRT Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

Out of range message on my monitor.


Boot your computer to safe mode and change the display settings to either 800x600 or 1024x768 then save and reboot once it comes back up you can change the display setting to what you prefer.\015\012To get into safe mode press F8 on you keyboar ... Computer Monitors

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

In the middle of my screen a blue box is showing and in it this reads OUT OF RANGE H. FREQUENCY 68.7 KHz V. FREQUENCY 85.0Hz What does this mean and how can I fix it this was a gift...


That message appears when the Windoze display settings exceed the\015\012monitor capabilities. If you will boot into windoze safe mode (F8 at\015\012boot) and correct the display settings, the message should clear at the\015\012next boot. Afterwards ... Envision H22W 22" Monitor

Chimei CMV 938D 'Out of range' error message only when using DVI Connector on specific resolution and color depth


I know this sounds obvious but- I had the same problem, and turns out the cord want plugged in quite properly at the back of the monitor. This may not fix every problem, but, I suggest you check the cord pligged in at the back of the monitor is firml ... Envision EN-7100e 17" Flat Panel LCD Monitor

When I switch my windows XP Home Edition on instead of the usual gradual build up to Desk Top & icon programmes etc. I get the usual large black screen but instead of the windows motif appearing I get a deep blue oblong about 6"x1" with a message ("OUT OF RANGE") (H:27.8K V: 61.9) The H27. 8K Flashing Red This happens every time when switching on and the only means of closing down is to turn the power off. I have a Lap Top connectd to the Desk Top


The results you are seeing are actually from the monitor itself. It's telling you the vertical and horizontal sync frequencies to help you troubleshoot your lack of display.\015\012\015\012You'd usually see this happen when someone has se ... Packard Bell PC Desktops

"out of frequency range" message nothing works


Try booting to the ENABLE VGA mode off the F8 menu\015\012if you can get to the desktop and then you can go to display properties and see if you can reset the resolution to normal. If no go, try updating the video driver ... HP Compaq FS 7550 17 in.CRT Conventional Monitor

Input Signal Out Of Range


Some monitors have low resolution, that if it doesn't support that resolution then you'll expect an "input signal out of range" message on screen. try to boot on "safe mode" if it works then you have to lower your screen resolution at "display proper ... HP Pavilion F1523 15" LCD Monitor

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.


That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Intstalled starlogic moniter to PC and got error message


Hi,\015\012the "Out of Range" message usually appears when the video card is putting out a video resolution or frequency that the monitor isn't able to handle. You should reboot your computer and BEFORE the Windows screen shows up, press the F ... Computer Monitors

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

Computer crashes My computer will switch on for a while but it is slower than usual and if i try and have more than one application running at once or do too much it freezes, switches off and then a display message reads Frequency out of range 4khz/8Hz. Please change the display mode to 1280 x 1024 at 60Hz. The display mode is already at this so I don't understand this message. It has also on occasion not been booting up and only when I have fiddled about in the BIOS set up have I eventually got


You may have to many issues here.\015\012however you may want to see how much memory your computer is using.\015\012press ctrl+alt+del and you should see task manager.. switch around the tabs and you should see how much is actually runnin ... PC Desktops

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

One more prob


Keep pressing F8 during the system boot up and select "safe mode" and press enter ...after you get into the safe mode then go tostart menu>control panel > system> hardware tabdevice managerin this go ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Monitor goes blank on boot up message says out of range when boot to win 7 screen please help franco


Your screen refresh rate is set to high for your monitor.\015\012You will need to startup in safe mode if possible and change the refresh rate, >control panel>display>change resolution>advanced options\015\012\015\012If ... Computer Monitors

Black screen Wasn't on a porn site, but it came onto screen, then screen went black, tried everything. Message says out of range. What does that mean, can you give me any suggestions? Thanks


Seems like a virus or so messed with your display drivers :Reboot and start your computer in safe mode (by pressing F8 at boot)When in safe mode, go to your control panel and add/remove programs and remove your nvidia/ati drivers fr ... Computer Monitors

Running with NT4


You need to go into safe mode and change the 75 Hrz in the monitor properties ... LG Flatron L1715S 17" LCD Monitor

I have an old Medion monitor that I'm trying to use while my regular monitor is getting fixed, but I have a little trouble getting it to work. When I boot the computer it displays the Compaq logo and boot sequence, but windows start up I get a blank screen, and after a little while the message "Signal out of range Set monitor to: 1024 x 768 60 Hz" The same happens when I start in safemode. My OS is Windows XP SP3. The monitor worked just fine with my laptop less than an hour ago, and the graphic


Not matching with the Resulation..Change the resulation with other PC and and fix the HZ 60..will work.. ... Computer Monitors

"Not support Out of range"


You have to boot your PC in safe mode using press F8 key.after that you decrease the resolution in the display setting section.It will help you. ... AOC CT720G 17" CRT Monitor

How to reinstall windows xp if files are missing??


CLEAN INSTALLATIONNOTE: Before proceeding, make sure all necessary backups are completed.* Insert the Windows XP Reinstallation CD into the top CD drive* Remove any external devices from the computer: (except the mouse & ... Gateway 310 Series (158920) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5852 seconds