Having problems with your Westinghouse 19" Widescreen Flat Panel LCD Monitor ?
The monitor turnits self off and on when i put it on
Is it getting signal from the computer? Todays monitors have a neat safety feature built in to them that will shutoff the monitor is no signal is detected in order to save power and avoid screen burn in. If you have no signal from the computer try a different monitor, if that works then you need to repair the monitor, if it doesn't replace your video card.
Repair Help & Product Troubleshooting for Westinghouse 19" Widescreen Flat Panel LCD Monitor
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The monitor turnits self off and on when i put it on
Is it getting signal from the computer? Todays monitors have a neat safety feature built in to them that will shutoff the monitor is no signal is detected in order to save power and avoid screen burn in. If you have no signal from the computer try ... Westinghouse 19" Widescreen Flat Panel LCD Monitor
My monitor shuts off(goes blank for a few seconds
The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor
ACER AL1914 LCD Monitor goes black but green light stays on
The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor
Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?
When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor
Can't set up network w linksys modem
Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops
Wont go to normal start up screen!!!
The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor
3yr old got ahold of monitor
Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors
Philips 190S monitor - Urgent!
The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor
Gateway monitor FPD1975W-UK screen fuzzy lines for a few seconds blue on & off light flashes on and off then screen goes blank also a small current coming through the pc connector cable.
The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Gateway FPD1975W 19" LCD Monitor
LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz
Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor
Monitor wont work properly
It sounds like the power supply in the computer is not putting out the correct amount of juice through the motherboard, and into the monitor. either that or if you have the monitor connected to a seperate video card, than the card could by no good. T ... ViewSonic VA1930WM LCD Monitor
No display on SyncMaster 710N
I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor
I have a new Dell Studio 540 computer and I'd like to hook it up to my Gateway EV910 monitor. I connected everything correctly. The monitor has power, turns on to the monitor self test screen where it tells me everything is okay with the monitor and then the monitor goes to power save mode. I think that I need to put a Gateway driver on the Dell in order to get it to recognize and communicate with my monitor. How do I do that? Where do I get the driver? Help!
It should recognize it immediately, and the only problem that i can think of would be your graphics card not supporting it.\015\012\015\012Here is the driver for it:\015\012 ... Gateway EV 910 19" CRT Monitor
Problem with Acer LCD monitor, one third looks ''burnt''
I'm thinking that you need a new monitor. You already satisfied yourself that it is not the computer by putting the monitor on another machine. ... Acer Computer Monitors
An Out of range box
Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors
I have an HP flatscreen monitor that worked great til the other day. Now it only stays on for about a second and then goes black. If I turn it off and then back on it again will only stay on for a second. Time for a new monitor? This one is only a year old
I,m guessing that what has happened to your monitor is that there are caps (capasitors ) in a few of the monitors on the market today the company bought caps from capxon which is a bad company.... i see a lot of them in all types of systems anyway ... PC Desktops
I have an Envision H170L monitor that goes dark after a few seconds. I did the flashlight test and could see the desktop. Took the monitor apart and went through the board pretty carefully checking for bad capacitors. I replaced one of the 22PF 3KV capacitors that had turned a nice shade of grey from blue. Outside of that, could not find another bad one. I put it all back together, fired it up and kept getting the orignal symptoms. Any suggestions?
Http://www.lcdparts.net/howto/troubleshooting/LaptopCCFL1.aspx OR MONITORtake your plate a part, without desolding anything, reconnect your ccfl's to your invertor , this is how I found that with only 3/4 my monitor ccfl backlights worked ... Envision H170L Monitor
My monitor turns of randomly
Hello cdannyxd I have the same problem as you and the one thing I found out why it dose this is because:1. The monitor is over heating. 2. The board it self has a faulty conductor.3. Or your video card (or driver) is bad. But if it ... Dell E228WFP LCD Monitor
My computer dont have a display - PC Desktops
If its a desktop, run monitor self test, unplug cable of monitor from back of pc, turn on both monitor and computer, if nothing on screen. monitor needs to be replaced., if its laptop, tkae out battery and unplug ac , press and hld power button for 5 ... PC Desktops
Power is on but self display & cpu display not
Probably itz either minor case of improper ground/cpu fan/faulty power cable..or major case of faulty or defective main board/ram/daughter or addon card(s)....plz do check the following as in order:.. ... LG Studioworks 563N 15" CRT Monitor
When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b
The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor
I-INC CY199D lcd monitors will not turn on or off
Find a electronic repair shop and ask them look up the ic number. if they they can read the program of of the old chip, they can put it on a new eeprom. somtimes the chip wont work but can still be read..\015\012\015\012\015\012als ... Computer Monitors
Monitor is blank/dimension 2400
If you put a spare monitor on your computer and everything is fine I'd say it has an electronic problem. If the screen is still blank I would look at the video card or PC itself as the problem. Just for fun check the video cable for bent or missing ... Computer Monitors
I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?
The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor
Added a memory stick to my Dell 2400 Desktop computer and the monitor, mouse, & keyboard won't work
HiThe supported Memory types for Dimension 2400 Series is PC2100 (266-MHz) or PC2700 (333-MHz) DDR SDRAM (non-ECC). Supported Memory capacities are 128, 256, or 512MB and a Max if 1GB (1024MB). The first obvious q ... Dell Dimension 2400 PC Desktop