Having problems with your ViewSonic VX910 19" LCD Monitor ?

When I start my game, monitor goes black and out of range appears

\015 Everytime I begin to load my game. The monitor just goes black and the 'out of range' appears.Does anyone have any ideas what could be the problem?I had some trouble with the same monitor before (I was sent a new one...this was ages ago anyway!)\015

Answers :

If the monitor is ok with other games then the problem may be with the game you are trying to run. Sounds like the game is trying to run in a resolution the monitor is not happy with. Also what type of graphics card do you have? Is it capable of running the game?

Try running the game in a different resolution (which game is it btw?) and if that doesnt work try updating the graphics drivers.
I suspect the game is trying to run in a resolution that is either not supported by the monitor or your video card. If there is a setup/configuration for the game please run it to choose a different resolution.

You can tell the resolution your are currently running by looking in control panel, display, settings.

Your monitor supports a max resolution of 1280x1024, so if the minimum requirements of the game are higher then the monitor simply will not work with the game. If the monitor meets the requirements then lets look at the max resolution of the video card you are using.

Please let us know if this has solved your problem or if you would like further assistance.
Repair Help & Product Troubleshooting for ViewSonic VX910 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor out of range when a game is booted up

The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

When I start my game, monitor goes black and out of range appears

If the monitor is ok with other games then the problem may be with the game you are trying to run. Sounds like the game is trying to run in a resolution the monitor is not happy with. Also what type of graphics card do you have? Is it capable of runn ... ViewSonic VX910 19" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Screen shows different colour grids when starting then goes black with message in right corner "out of range"

Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Monitor displays Msg. frequency out of range, screen is black

Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change y ... Compaq Computer Monitors

Acer AL1917W goes black

I have recently opened my AL1917 (not wide) but it should work the same. First remove the stand. This is done by removing the plastic cover over the stand hinge (which appears to be part of the back cover, but is'nt.) Mine was done with simple tum ... Acer AL1917W LCD Monitor

Monitor keeps blank even the power lLED is on green

Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

Frequency out of range

Try to set the monitor refresh rate to Adapter Default despite of Optimal or lower rate of refresh. For this first download the manual of your monitor and check what is the highest refresh rate your monitor can suport. Then goto the display propertie ... HP Compaq FS7600 17" CRT Monitor

Outof Range error message & black screen

To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message

Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I have a flat screen tv and monitor combi i want to add

Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

I think this problem is with my monitor.

Try checking the settings for the going to sleep and others in your pc windows program that may be shutting it off.You can access it by clicking start and then clicking control panel then clicking monitor or similar menu.Just follow throu ... LG Flatron L1919S LCD Monitor

Wavy lines, goes black during video games.

It sounds to me like the monitor's refresh rate is too low to support your current settings, and the demands of the game. Have you tried adjusting the refresh rate? If I'm right, you should be able to fix the wavy lines that way. I'm not sure how ... Proview PL926WBi 19" LCD Monitor

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv

Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

ViewSonc VX924 LCD Monitor

Check the information at Viewsonic's website regarding their warranty:http://www.viewsonic.com/support/warranties/limited-warranty/If you have your proof-of-purchase and it shows the monitor is less than a year old, it would b ... ViewSonic VX910 19" LCD Monitor

Emachines monitor goes black while CPU is still working

... E-Machines eMachines Monitor E15T4

Monitor goes dark over and over

Try and find the LCD Screen diagram, there is a good chance that your capacitors are failing. The capacitors that will need to be replaced are the ones with either a bubbled top, you will notice these right away once you compare them to the rest. O ... Computer Monitors

The graphic software failed. no display - HP Pavilion dv6000z Notebook

When you turn the computer on, do you see the HP logo? \015\012\015\012If you don't, keep the computer on and try holding the computer screen under an overhead light at an angle. If you see a faint image of anything on your monitor, then ... HP Pavilion dv6000z Notebook

Monitor goes into power saver mode

Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

Problem with compaq MV 520 monitor

Your monitor is operating normally. After Windows starts it is setting the video resolution to something outside of the monitor's range. That's why you see the Windows splash screen, then the message from the monitor about the settings. Most likely t ... Compaq MV 520 Monitor

Monitor went dark

You may have a defective CCFL backlight, it may have the following symptom: Screen flashes on and off or displays reddish pink hue. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture ... Toshiba Satellite A135-S2386 Notebook

Game goes to a black screen then crashes...

You need to check the system requirement s and then go to our start menu, click run on the right hand side, and type in dxdiag and that will show you whether or not the correct sytem requirements for the fulll game. i think its most likely your graph ... PC Game Controllers

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.

That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Monitor image comes up, then blacks out, power still on

Hello David,This is very common problem and is heat/age related, but It can happen to monitors that are no more than a year old. It is usually bad capacitors on on power inverter board. I just fixed two monitors with this problem. This pr ... Rosewill MNTR |LCD 19' 8MS DVI R912E Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9576 seconds