Having problems with your ViewSonic VX2255 Monitor ?

DVI connection fault

\015 Hi \015\012I have a viewsonic vw 2255wmb, and its been working fine. I have it connected to my pc (asusen8800gt graphics card) via a DVI connection. The monitor sits in standby mode and when i turn on the PC up it comes (little blue light turns red and I get a picture). However when I turned it on yesterday the pc powered up but the monitor did not, displaying the message"no digital input" or words to that effect. Idid the usual turn it of check the cables etc but no joy. I then got an old lcd monitor and plugged that into the PC via the same socket but using a DVI-Dsub adapter and an old Dsub cable and it worked fine. i then then disconnected and plugged in the viewsonic in the same way, using its optional d-sub input on the viewsonic and it worked fine also, but obviously not in "digital" mode so the screen is noticably less crisp. I'm going to buy a new cable this afternoon as it's the cheapest place to start failing that i'm lost\015

Answers :

Same problem this morning. wondering if the money i spent was well or not.
not happy.
I had the same problem, you must call Viewsonic to change your screen. The DVI input on the screen is dead.
Repair Help & Product Troubleshooting for ViewSonic VX2255 Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DVI connection fault


Same problem this morning. wondering if the money i spent was well or not.not happy. ... ViewSonic VX2255 Monitor

I disconnected my LCD monitor from my Deskside HP Pavilion 1000 and connected it to my Notebook to check that a fault on my notebook was a screen fault and not a system fault. This proved that it was a screen problem on the notebook. However, when I connected my LCD monitor back to the HP Pavilion PC I keep getting an ''RGB No input Signal'' message. Can anyone help? I'm not very technical unfortunately! Thanks Bill


You have to set the monitor to accept the signal from the correct connector it uses on the pc (most likely DVI) from the menu. ... Computer Monitors

When dvi plug is used screen gets funny bright colored lines


FIX for design fault of ASUS VW222u Problems with monitor using dvi while vga works fine.my ASUS VW222u had the same problem many are reporting after about 8 monthswith ... ASUS VW222U Monitor

DVI output problems with Acer Veriton M464


If you are comfortable with opening the case, you can try this: Unplug the power supply, make sure are constantly grounded (touching metal)remove add-in video card. Locate the "Clear CMOS" jumper (usually 3 pins in a row with two shorted via a plas ... Acer PC Desktops

When i turn on my computer my lgw2242t monitor say's analog and then goes black. However the blue power light stays on.what could be causing this?


Hi!Not sure if this is your problem, but check the following:\015\012\015\012Is your monitor connected to your PC with a DVI cable?\015\012It will look like this:\015\012 ... Computer Monitors

TFT Monitor Dislay fault


This is a hardware issue with the monitor. I hope you kept a receipt with contact information for the seller. Make sure the cable doesn't have any bent pins too on both ends. ... Gateway FPD2275W LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

Monitor displays white screen when connected and powered.


You've done sensible substitutions and it does sound like dead monitor.\015\012The white screen is due to no pixels being controlled at all; what you are seeing is an unpolarized view of the backlight.\015\012\015\012It's conceivab ... Gateway FPD2275W LCD Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

NEC 2190UXP monitor problem cant replace with another monitor


... NEC Computer Monitors

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

How do i connect my compaq pc to tv


Without the model number comptuer, I cannot verify what outputs your comptuer has. Without this, I will provide the various ways a PC can be connected to a TV.\015\012\015\0121. Use a VGA to DVI adapter (HD-15 pin to DVI). Use either a ... Compaq PC Desktops

I have a Dell computer that runs Windows Vista and I want to hook it up to use my TV as a monitor to watch a webcast. Please advise.


The first step is to inspect both your laptop and\015\012TV and identify the connections, easily located on the back of either\015\012component. There are five basic types of jacks, or ports involved:*Composite/phono plug (RCA)*S-Video ... Computer Monitors

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Dear Sir, I have an iiyama Prolite 22" TFT LCD Monitor. As you know there are 2 connection cables. Whilst I can connect direct to the CPU with one of these, The one with the 'two groups of 9 pins and a tab on it (which I believe is: DVI D20 !), I am not familier with. Is there a special requirement whereby this one is usable please? I would appreciate any advice you could give in regard to this. Thank you. Yours truly, David Jones


Hi there,This device will convert a DVI-A connection to a VGA monitor cable\015\012connection for monitors and computers that require it. DVI-D can not\015\012convert to VGA. Only DVI-A can be converted into VGA.Use with ... PC Desktops

Dell 1907fp picture "shifts up"


It is most likely the cable, it is where most faults of this ilk lie in LCD monitors. :-) ... Dell UltraSharp 1907FP 19" LCD Monitor

Benq FP937s Monitor - no display


Usually this type of problem is due to a faulty electrolytic capacitor on the monitor's power supply board or the inverter board that powers the backlight lamps. If you have a soldering iron and some technical skill it's possible to repair this your ... Gateway FPD2275W LCD Monitor

My tft 20' lcd monitor is black but in background you can see the screen, I've only had it since February of this year


Hi there!Just to clarify, it sounds like you're saying that an image appears but that it's so dim you can hardly see it and it looks almost black. If that is the case, the most likely source of the problem is the backlight. Th ... Computer Monitors

L1975NW Monitor will eventually light up a boot up


Your cold cathodes (tiny fluoresent lamps) and, the inverter (ballast) board in the monitor's screen; need to be replaced ... Westinghouse L1975NW Monitor

Screenless in seattle


I had the same screen and I was told that it is a design fault and too costly to repair. ... PC Desktops

I need help setting up the DVI input.


Hi,\015\012\015\012There are two ways to do this.\015\012\015\012First and simplest is to simply shutdown the pc, disconnect the analog from the back of your PC and connect the DVI cable to the PC and monitor. When you turn i ... ViewSonic VX924 19" LCD Monitor

How do i connect my acer aspire 5810T to my tv, thanks


I am assuming that you want to display your laptop on your TV. Since you did not post what TV you have, I am listing multiple ways to connect your laptop to your TV. Just pick the right type connection that works for both your laptop and TV, connect ... Acer Aspire AS5530-5824 Laptop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3809 seconds