Having problems with your ViewSonic VX2235WM Monitor ?

I have a sonicview monitor vx2235wm. I unplugged it from the computer and moved the computer. Now that it is plugged back in it says ''no signal digital'' I moved another monitor to it and it says the same thing on both computers


Answers :

Try booting in safe mode (holding down F8 key while booting) what this will do is load default drivers for your devices and lower your resolution. Once in, you can re-install your monitor.
If this doesn't work, your video card may have become unseated during the move. Open the machine and check to ensure the video card is seated. This can be true with onboard video as well. Ensure the component if firmly in place before connecting your monitor to it. Hope you find this solves your problem. All the best!
Greg
I hate to sound like a dip stick but, you did connect the power cord to power did you connect the monitor to the computer? Was the light on on the monitor? was it blue? Was it orange or red? Did you press the power button on the monitor? Try those things, most generally people forget to either install the cords properly or power up the monitor. Once the monitor is powered you don't normally have to do it again. Hope this works for you. If not send me an email and we can try something else.
Repair Help & Product Troubleshooting for ViewSonic VX2235WM Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

I have a sonicview monitor vx2235wm. I unplugged it from the computer and moved the computer. Now that it is plugged back in it says ''no signal digital'' I moved another monitor to it and it says the same thing on both computers


Try booting in safe mode (holding down F8 key while booting) what this will do is load default drivers for your devices and lower your resolution. Once in, you can re-install your monitor. If this doesn't work, your video card may have become ... ViewSonic VX2235WM Monitor

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Monitor says no input signal


Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.\015\012\015\012Boot your windows in safe mode (tap F8 befo ... PC Desktops

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Monitor says no signal


The cable has two ends, see the other end ... Gateway FPD1975W 19" LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Monitor I purchased a new HP PC with a digital Samsung monitor. IThere is power to the monitor and it worked for a few days but now the power light is flashing. When you hit SOURCE it flashes analog/digital. There isn't an analog option on this PC. How do I get the monitor to operate properly?


Double check the monitor cable, both going to the monitor, and going to the computer. Ensure it's securely connected. If this doesn't change anything, try rebooting your computer. When the power light flashes, it's in sleep mode and doesn't detect ... Gateway FPD2275W LCD Monitor

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

Display failure after having lid closed while running


The solution to your problem is probably not the monitor, follow these steps:1. Connect and boot your computer with 2 different monitors.2. If it does'nt work with either of them the problem is from another computer component.Posibl ... Dell Inspiron 8500 Notebook

Monitor malfunction, says VGA Input: No Signal and goes to sleep


From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

COMPUTER MONITOR SAYS NO SIGNAL


Your monitor may not be compatible with your computer. Is it the monitor that came with the computer or an aftermarket one? One surefire way to tell if your monitor is the problem is the simplest trick in the book. Get another monitor and hook it up ... E-Machines eMachines Monitor E15T4

Will not load.


My old computer had a problem like this, i think the only way to fix a problem like this would be to reformat your hard drive and reinstall your operating system, which would delete everything on your hard drive...if you do not want to lose the files ... Acer Aspire E380-UD420A (ASE380-UD420A) PC Desktop

Computer will not load.


Use safe mode..do a disc clean, defrag..and then reboot...sounds like the operating system headers went unhappy when you moved it(which I highly recommend you NOT do again).. ... Acer Aspire E380-UD420A (ASE380-UD420A) PC Desktop

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

Can't get monitor to connect


There are a few things to look at. It is very obvious that the screen is in good condition since you can see the message on it. Now the problem lies with either the RAM and/or the VGA. If you are using an onboard VGA, try a PCI VGA card. Try to r ... Samsung SyncMaster 2233BW 22" LCD Monitor

I have a desktop pc HP Pavillion a6600f. When i power on the computer i get a blank screen. The monitor says no signal going to sleep. So far I have changed the graphics card, Switched the ram to different slots, and removed the cmos cell. I am open to any more suggestions you have for me. monitor is good i have it hooked up to another computer in front of me please help! operating system windows vista home premium 64. installed update then shut down computer when tried to restart nothing


Perry7575\015\012\015\012Most likely the problem is with Windows its self. I am not sure what is exacting happening but I have been seeing alot of this lately. Something is causing something with the video to get out of wack. I have fi ... HP Pavilion a6600f Desktop PC

Monitor says no signal


Is this a brand new system? What is the make/model?\015\012\015\012This is a peculiar problem, as the computer was working fine for several months after you purchased the computer, then suddenly started this behavior. The fact that you ... PC Desktops

My monitor says no signal


A friend gave me this computer because he got another and was tired of messing with this one ... he says he turned it off one night and it would never boot back up , sso i had a new 160 gig hd which is the same that was in it and i installed it think ... E-Machines eMachines Monitor E15T4

I have s samsung monitor T220 and will not come to show that my computer is connected, I have a message on the screen that says check signal cable with the word digital at the bottom of the message box. The cable was changed and I still have the message. Any suggestions? Thanks in advance


Oh i had the same issue with T220, remove all ur memories , disconnect the monitor , remove the graphic card, clean it and instert it back , insert the memories and then connect the monitor to analog cabl;e first,,, put it on and then shut it down an ... Computer Monitors

My VX924 Green Led Blinks until fully booted to windows


Ok if what im understanding is you tried on another computer and it worked great \015\012the monitor is not your problem the problem lies with your video card\015\012the video card could be outdated\015\012the video card could need ... ViewSonic VX924 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3079 seconds