Having problems with your ViewSonic VG900b 19" LCD Monitor ?

Vga cable and power cord for monitor

\015 What type or name of vga cable and power cord for my viewsonic monitor\015

Answers :

Hello,

The AC adapters are available here:

http://www.ccl-la.com/catalog/product_info.php?products_id=136


And the VGA cables are available from the same site at this link:
http://www.ccl-la.com/catalog/product_info.php?products_id=54

I hope this helps,
BuddyMc
The vga cable is a DB15, 3 ranks with male connector at each end,
\015\012(you can use a vga extention and add a little male to male adaptor at the female end to get finaly 2 males connectors)
\015\012And, the power cord is in fact an ac/dc adaptor, the replacement part is: 12b27-0428 (12v 5A 60w 4 pins) ...
\015\012just type de number 12b27-0428 on internet and you're on ...
Repair Help & Product Troubleshooting for ViewSonic VG900b 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DVI input on monitor not working


Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga ... ViewSonic VX2025wm 20.1" LCD Monitor

Push the on button and nothing happens


I believe you are using a new power supply now.\015\012Before you start, first check if your Power button is OK.To do this, first unplug the power cord from your PC.Remove POWER-Button connector (with black/white or blu ... HP Computer Processors

I need power cords for my monitor


The monitor needs a power cord and a signal cable. The power cord is a standard 3-prong detachable cord just like the one on nearly every desktop computer and many other electronic appliances.The signal cable may be one of two types, depe ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Color dis-order and then flickering display


Try uninstalling and reinstalling the monitor drivers if any are applicable, run a direct X test on your hardware make sure your video card is OK. Try doing a wiggle test on the VGA cable that is plug ed into the back of your computer, that sends the ... AOC CT720G 17" CRT Monitor

Ground Noise Problem Possibly Attributed to Samsung Monitor


Do you have another power adapter to try? Sometimes those go bad, and are pretty cheap to test out (around $35-$50). Otherwise it is the DC-in board on your PowerBook. I replace about 2 of those per month with our clients up here on the PowerBooks ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

Won't power on. No lights at all.


You have done Most of it...\015\012You have tried to swap the Power cords that work fine with the Other Monitors and If that do not work there are 2 things externally that could be bad.\015\012\015\0121-> The Power Button.\ ... ViewSonic VX924 19" LCD Monitor

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed


Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

How do I hook up the moniter to the CPU? - Gateway PC Desktops


First figure out what output video the computer has. These days it can be VGA, DVI, or HDMI. Then determine what video inputs are on the monitor (same list). Then plug in the desired cable. Many monitors only come with the VGA cable. If you do not ha ... Gateway PC Desktops

Moved computer to new location. rehooked all. monitor wont start


Without seeing your make or model on you monitor it is difficult to give you any advice.But with that said.. If your monitor is a flat screen there is a power cord that plugs into the wall the cord is connected to a small box (power converter) ... Star Logic 17" LCD Monitor

Hook up to the CPU


Two cables are needed, Power and Data signal (VGA). Most monitors take the same type of power cord as computer power supplies. (Some computers will allow you to plug in a slightly modified cable that will power the monitor off the computer's power su ... Gateway 7004618 (Black) 17 in. Flat Panel LCD Monitor

Monitor wont power back on, Tried almost everything. Some days it will power up , sometimes is wont. If my timing is perfect and I plug the monitor into power cord at exact time I turn on computer it will work fine and I then try not shut down computer for days. Monitor stays on as long as computer does, but computer is shut down It may be days before Monitor turns on again. I then tried the monitor on a different computer and still nothing. So I have replaced monitor power cord, power strip ev


It sounds like something to do with auto shut down or power saver mode on your monitor. you may have to replace the power supply in your monitor.\015\012It could also be the VGA cable or the VGA connector bent pin.\015\012Step through the ... LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

Hp Pavillion F1703 17 LCD monitor


The VGA cable should be the standard 15 pin connector. But if you are referring to the power cable it is a small round plug similar to that of a laptop. You should have recieved a power cord with a transformer suited to the same voltage and amperage ... HP Pavilion F1703 17" LCD Monitor

Vga cable and power cord for monitor


Hello,The AC adapters are available here:http://www.ccl-la.com/catalog/product_info.php?products_id=136And the VGA cables are availabl ... ViewSonic VG900b 19" LCD Monitor

No power dell 1900fp silver blank screen power ??? help!!


Try swapping the computer power cable and don't connect the vga cable with the system. if you get a power on self test displayed it makes sure that the monitor is fine. if nothing is displayed you can take it for repairs or else call 1-800-624-9896 i ... Dell UltraSharp 1900FP 19" Flat Panel LCD Monitor

Compaq monitor no working properly


Did monitor work's on another pc?\015\012\015\012If YESS so u need to change ur VGA ... Compaq Presario 5000 PC Desktop

What cable do I buy


If it is a dvi monitor then you would need a dvi cable. VGA monitor would need a VGA cable. HDMI monitor would need a hdmi cable. If it is compatible with both dvi & vga and your video card has a dvi output then dvi is a better quality than vga. ... NEC MultiSync 1525X 15" LCD Monitor

No signal on startup


If monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .S ... Princeton Digital VL2018W Monitor

Dell optiplex gx 270 is not giving display - Dell OptiPlex GX270 PC Desktop


If you are not getting display for your Dell Optiplex GX 270, the issue may be one of three possible causes:* The VGA cable connection between the Dell PC and the monitor, may not be seated in the VGA port correctly. To resolve this, just ... Dell OptiPlex GX270 PC Desktop

Moniter My moniter will not stay on and when I turn the computer back on, it says AVG and has the picture of the AVG cord. I assumed that the AVG cord had a short in it or something but when I bought a new one, it still did not work.


First please check whether the Monitor powering ON or notthe see the colour of light of the monitor i.e, its green or orange or not glowing next see that all the lights showing but constantly flickering or else just see u r VGA or DVI Cable whi ... E-Machines eMachines Desktop PC

Princeton VL1715 startup problem


Have you disabled your onboard video in the BIOS? Boot your machine with the vga cord to the motherboard. You need to get into the BIOS. Depending on the make of your machine you need you will need to hit the del key, f2, or even f1. Go to the per ... Princeton Digital VL17151 17" Flat Panel LCD Monitor

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

Flat screen is going out


Replace the VGA or HDMI (whichever you're using) Cable, and the Power Cable (one of the two can cause this problem, or even worse, fry it!)\015\012\015\012Then,...... try connecting the monitor (with new video and power cables to another ... PC Desktops

I have a problem with my toshiba a135. All the power lights are on but my screen is blank. can you tell what the problem is?


Hi.\015\012\015\012\015\012To start do the simple reset described below, this is the first step in troubleshooting.\015\012\015\012\015\012Disconnect the power adapter cord and remove battery, wait ten minutes, connect the pow ... Toshiba Satellite A135-S2276 Notebook

Monitor was in power safe mode, had older monitor and plugged it in and it said nothing wrong with your computer, check monitor cable. card and plug loose no back of tower and also loose on inside of tower. what do we need to replace?


Not completely sure but Ill give it a shot \015\012might be something is going wrong with your monitor \015\012or your monitor ID was not established try these 3 things \015\012 1. right click display after attaching trouble some ... Gateway 700 X PC Desktop

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6990 seconds