Having problems with your ViewSonic VG2230WM LCD Monitor ?

Monitor screen begins as computer is booting up and then screen goes black. Message says there is no signal.


Answers :

If the power light dims or changes color after the no signal message comes up, that means the monitor went to sleep.
While the monitor is plugged in and on and the computer is also on, Try unplugging the VGA cable from the monitor. wait 30 seconds and then plug it back in o see if the power button light comes back to normal color and the screen flashes on.
If not, then the monitor is not getting a signal from the computer.
If using a desktop computer,Try a different cord or try the monitor on another computer.
If using a laptop, you need to activate the laptop to use an external monitor. That can be done through the display settings, OR, most laptops have a shortcut key feature which usually involves pushing the Fn key and one of the F keys at the same time. The F key may say CRT/lcd or have a picture of a monitor and a screen.
If the power light does light back up and still no picture, There may be an internal issue on the monitor
Repair Help & Product Troubleshooting for ViewSonic VG2230WM LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor screen begins as computer is booting up and then screen goes black. Message says there is no signal.


If the power light dims or changes color after the no signal message comes up, that means the monitor went to sleep.While the monitor is plugged in and on and the computer is also on, Try unplugging the VGA cable from the monitor. wait 30 secon ... ViewSonic VG2230WM LCD Monitor

Monitor won't stay on. Error message comes up that says "no input signal", then monitor goes out.


Problem with the monitor, monitor cable, or video output. For monitor, if you have more than one input, make sure it's set to the correct one. Try a different cable. Try a different monitor. Check your video card settings--if you see the BIOS boo ... HP PC Desktops

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

No input data


Generally this means that the monitor is not getting a signal from the computer.\015\012\015\012You can also get this message when a computer goes into standby. Pressing a key or moving the mouse can bring it back. \015\012\ ... HP PC Desktops

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

I turn on my laptop, i get the compaq logo then i seen the press esc. f1, f2, f9,f11, etc but then the screen is blank and nothing else happens what should i do now!! i did the troubleshooting as far as removing the dual memory and only using one then tried the other also i cant hit any of the keys except escape and then the screen goes back to blank no icons no nothing just a black screen.please help asap thanks, jeanie


Jeanie, there is the possibility that your hard drive has failed. Lets try though to boot from the windows install disc. Put the cd in and boot the computer up. If the hard drive has failed the laptop might try to automatically boot the windows prog ... HP Compaq Presario V6000T Notebook

Computer restarts on own and thats all it does.


I have a similar situation, only worse. \015\012\015\012Same brand, Toshiba M1. I also get the loop at the begining but this is during the install process (windows vista). It goes half way and needed to reboot (that is correct). But when ... Toshiba Tecra M1 PC Laptops

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory


I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

When I turn on my computer it begins the boot then goes black


Try booting into safe mode. That will disable all drivers and use generic windows drivers to send commands to the devices. If that still doesnt work, id say that there is a problem with your OS installation. Backup your files using an external harddr ... Dell Latitude D600 Laptop Computer - Intel Pentium M 725 1.60GHz, 802.11b Wireless, 512M PC Notebook

Can't install new OS


You need to install directly from the vista disc when the computer is powered on, put the disk in and it should ask you to press any button to start from cd..if not then the computer is not set to start up from a cd, you can either enter ... Toshiba Portege R100 Notebook

PC or monitor, signal problems


Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

CAN'T START UP COMPUTER DETECTS NO MOUSE OR KEYBOARD


The Blue Screen Your Are Talking About Its UNMOUNTABLE BOOT VOLUME and in case of blue screen mouse and keyboard are not detected as WINDOWS are not loading....There Are 3 Ways To Resolve It But For All 3 Methods We Need The MI ... PC Desktops

Hanns g JC199D will not turn on, comp is on, try to turn monitor


No signal indicates a couple things... i suspect your computer isn't even booting up. reboot the computer while tapping the F8 key.... you should see writing on the screen... boot to safe mode. after it sucessfully boots up... reboot again... shoul ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

HP Pavillion dv9000 fatal error


On the windows boot screen you should be getting choices for safe mode, safe mode with networking, etc ...Select "Disable automatic restart on system failure'And let me know what error message(s) you have ... write it all down ... HP Pavilion dv9000z Notebook

Signal out of range


It's not the monitor, it's the graphics driver. Boot into Safe Mode (F6 at startup before it starts booting to Windows) and have the driver handy for your video card. Install the newest driver for that card, reboot, and you should be good to go. ... Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

Exactly the same problem on boot-up with Likom (Futura) HD19A mon


Ok, if your computer is able to boot until you able to use it yet the screen is showing none yet working too, i suggest you change your data cable from the computer to the monitor. i once had a problem like that. it must have been damaged by high inp ... Microsoft Likom HD19A 19" LCD Monitor

"no signal" the problem started when i first used the screen, i had to wiggle around at the back for ages to get it to come on, now about 6 months later, im trying to use it again. If i reboot the computer loads as normal, the screen works perfectly, until i get to the section in windows where i have to type my user name, the LED light goes from green to yellow and it says no signal on the screen. no matter how much i play around with it, i cannot get the screen to come back on, i cannot even si


If you turn on your computer press the F8 key continiously until you get to a screen that gives you the option to boot in safe mode, select save mode, select your operating system, you will be able to login to your profile, right click on the desktop ... ViewSonic VX922 19" Monitor Flat Panel

Computer having touble booting up


Please see this HP support article for help troubleshooting the monitor. If you have anothe ... HP Compaq Presario S3000nx (DC475A#ABA) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1448 seconds