Having problems with your ViewSonic VG2030wm LCD Monitor ?

Monitor says No signal digital

\015 Have checked connections and even changed cable.\015\012Cannot find monitor manual and therefore do not know functions of various buttons\015

Answers :

Again one time try change the VGA cable
Is ether the monitor or video card uses both DVI or VGA port. There may be a switch on the graphic card that changes it from DVI to VGA, often outside the card.

Also is the computer monitor set to the right setting if it can use both VGA and DVI, if using DVI (of any type) it need to switch to digital, and if using VGA it need to be set to analog. This may be a physical switch or using the settings button. (see manual how to change them)


PS: VGA port is a blue D shaped port with 15 pin holes, and DVI is a white rectangle port with one port being a line.
Repair Help & Product Troubleshooting for ViewSonic VG2030wm LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Blank screen Help. I have a compaq presario sr1103wm. When I turn on the computer the monitor acts like it is getting no power. Also the keyboard lights don't come on. I tried replacing the video card and got the same results. I also tried a different monitor and cable with still the same results. Does anyone have any sugestions. Could it be the mother board?


When you say "When I turn on the computer the monitor acts like it is getting no power", do you mean the light on monitor doesn't come on or it does and it states it has "No Signal"? If it says no signal then it is receiving power just no signal from ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

After starting the computer the screen is black and only displays digital analog on screen and the blue light is flashing. It then displays a box say "check signal digital analog." please help me. Thanx.


This blue light flashing means there is power to monitor bu NO video\015\012signal. No Analog or digital Video . analog is the regular plug for PC\015\012to Monitor, the other is HDMI digital or other digital. Check signal\015\012digital/analog means ... Samsung Syncmaster 940BW LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Viewsonic VA712b issuses


Digital-to-Analog Converter - DAC\015\012\015\012\015\012\015\012\015\012When referring to Audio, DAC is also short for Digital-to-Analog Converter and is the pro ... ViewSonic VA712B 17" Flat Panel LCD Monitor

My viewsonic mo9nitor says analog not digital on


To clarify, you know that analog is referring to the VGA 15 pin video input, and digital is referring to the DVI video input, right? You can't have the digital video unless you use the DVI input, which requires a DVI output from your computer (and a ... ViewSonic Computer Monitors

Cpu says no input vga signal, then goes to sleep


The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. I ... HP GX613AA Pavilion A6300F Desktop PC

I have just installed a crucial x1600 pro graphics card,when i fired up the computor the monitor displayed multi coloured vertical lines and a box appeared saying it was in analog mode, how do i configure the targa visionary monitor to digital mode. regds A Gough


I'm assuming "it" is the monitor rather than the video card, and that you are using some flavor of windows as your operating system. 1. Digital vs Analog mode is determined by the cable input plug on the monitor that use. Your cable fr ... PC Desktops

Problem for LG 22" FLATRON Widescreen LCD Monitor LCD Monitor My monitor says analog power save and shuts off. Day before Yesterday I bought a new computer. I got the above mention problem on by monitor mostly when I connect it to UPS. But after that when I connect the monitor to mains the problem still remains. I have to restart my computer. Also before I bought the UPS on main power supply it gives same problem. Asha Joshi


The monitor is going itself to the Power Saver mode.It is not a problem of the monitor.This happens when there is no signal on the monitor.The monitor will display properly when there is an output signal on it.Please connect it to the computer and ch ... LG 22" FLATRON LCD Monitor

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Vx1932wm-3 monitor has stopped working properly,it will only stay on for around 2sec then lose digital signal and go black,same with analog.cant seem to make it stay on,the light on monitor is blue when it says lost signal, the graphics card is working fine 9400 series nvidia


I had the exact same problem. It's a bad capacitor on your power board. It's most likely the 1000uF 25v one towards the center of the board. I noticed it on mine because the top of the capacitor was pushed out more than usual and it has some residue, ... ViewSonic VX1932WM LCD Monitor

Monitor says no input signal


Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.\015\012\015\012Boot your windows in safe mode (tap F8 befo ... PC Desktops

It is plugged into the computer, and it is powered on, but the monitor screen says that there is no signal. I am certain that the monitor is plugged into the computer. I checked it via control panel and it says that the monitor is working properly.


Have you checked if its on the correct source,, analog or digital press the source button it will cycle to both and if its receiving a signal from the computer it should show a picture.\015\012Good luck ... Acer AL1916W 19" LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Problems with digital cable


Check the source on the monitor, there's a button for it on the front. ... Samsung 206BW Monitor

Can't get monitor to connect


There are a few things to look at. It is very obvious that the screen is in good condition since you can see the message on it. Now the problem lies with either the RAM and/or the VGA. If you are using an onboard VGA, try a PCI VGA card. Try to r ... Samsung SyncMaster 2233BW 22" LCD Monitor

Hi there, my viewsonic monitor VX912 is not getting a signal from my computer. I first checked to see if the connections were good. No joy ther! so I then tried to see if the cable was faulty(my monitor has two inputs:D-SUB a blue cable and DVI which has a white cable) by connecting my laptops TV-OUT port to my TVs PC port. Got a signal but then after a while a message came up saying "unsupported signal please set PC output" and then I lost the signal, so I guess the cable is fine?I did the sam


Is your tv HD, it may have worked on the digital signal, but perhaps it switched to a HD program, and it doesnot support that HD signal, If not it may be a switching problem ... Evesham PC Desktops

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

I have a sonicview monitor vx2235wm. I unplugged it from the computer and moved the computer. Now that it is plugged back in it says ''no signal digital'' I moved another monitor to it and it says the same thing on both computers


Try booting in safe mode (holding down F8 key while booting) what this will do is load default drivers for your devices and lower your resolution. Once in, you can re-install your monitor. If this doesn't work, your video card may have become ... ViewSonic VX2235WM Monitor

RESOLLUTION ISSUES OR GRAPHICS CARD UPGRADE?


Can you please put forth the problem in minimal words? ... HP Pavilion a6650f Desktop PC

I have s samsung monitor T220 and will not come to show that my computer is connected, I have a message on the screen that says check signal cable with the word digital at the bottom of the message box. The cable was changed and I still have the message. Any suggestions? Thanks in advance


Oh i had the same issue with T220, remove all ur memories , disconnect the monitor , remove the graphic card, clean it and instert it back , insert the memories and then connect the monitor to analog cabl;e first,,, put it on and then shut it down an ... Computer Monitors

Nothing comes up on the screen


The monitor connected to the system is set to receive video signals from the DVI port on the video card and it is not getting a signal.\015\012\015\012Possible Causes:\015\012\015\012Monitor is connected via VGA ... Dell OptiPlex GX280 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5364 seconds