Having problems with your ViewSonic VA1912wb Monitor ?

Viewsonic VA1912WB error says analog signal

\015 Windows XP splash screen appears for a second, then screen displays no analog signal and goes blank. Unit has been working just fine, this error started earlier today for the first time. I have checked all cable / power connections, but no luck. Any suggestions?\015

Answers :

I had a Gateway 19" TFT that did the same thing.
\015\012Does the power light stay on? If so, you more than likely have "dry" solder joints at the inverters. Take it apart & shoot a little solder on the inverter solder joints. Good as new now. The solder joints dry out because of the high heat generated. This is a very common problem.
Repair Help & Product Troubleshooting for ViewSonic VA1912wb Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Viewsonic VA1912WB error says analog signal


I had a Gateway 19" TFT that did the same thing.\015\012Does the power light stay on? If so, you more than likely have "dry" solder joints at the inverters. Take it apart & shoot a little solder on the inverter solder joints. Good as new no ... ViewSonic VA1912wb Monitor

Viewsonic VG 2030 WM monitor went to sleep and never woke up again. Now has black screen with blue box and "No signal Analog" error message. Have tried restarting, unplugging, replugging, with same results. This monitor is not even a year old.


This has nothing to do with monitor because its says no signal, meaning its working!!!you need to be looking at the computer for possible hardware failures i.e. graphics card, memory and bios reset etcbest regards ... PC Desktops

Viewsonic VA712b issuses


Digital-to-Analog Converter - DAC\015\012\015\012\015\012\015\012\015\012When referring to Audio, DAC is also short for Digital-to-Analog Converter and is the pro ... ViewSonic VA712B 17" Flat Panel LCD Monitor

My viewsonic mo9nitor says analog not digital on


To clarify, you know that analog is referring to the VGA 15 pin video input, and digital is referring to the DVI video input, right? You can't have the digital video unless you use the DVI input, which requires a DVI output from your computer (and a ... ViewSonic Computer Monitors

Toshiba laptop hooked up to viewsonic monitor analog error


... Toshiba Satellite A135-S4407 PC Notebook

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

HP pc with built-in tv tuner


Have 9, 5 and 13 turned entirely digital as yet, so as to leave you without their signal?From what you say, the tv tuner in your HP receives analog signals better than or instead of digital signals the stations you can receive may be anal ... PC Desktops

I have a viewsonic vg2021, it was working perfectly now when i try and boot up computer it says analog - no signal then the light on the screen goes orange, Please can you asisst urgently...


Hi grazerone,\015\012\015\012That typically happens when there is no video connection between the pc and the monitor. Are both sides plugged in?\015\012\015\012Alternatively you may have put the interface cable into the wrong ... Computer Monitors

Screen flashes on for a second, first says no signal, then flashes input analog next and then goes off


Have you tried cleaning its memory? or is your video card built in? if not try cleaning it (but be very careful you might scratch its terminals) try cleaning your memory using a rubber eraser. then clean the slots with a brush... ... PC Desktops

No signal - ViewSonic Computer Monitors


You don't specify what kind of monitor, CRT, LCD, or even a TV attached to your system, you're using. It's likely the monitor is set to receive a certain kind of signal (either analog or digital) but it's receiving the other one instead. Before proc ... ViewSonic Computer Monitors

After starting the computer the screen is black and only displays digital analog on screen and the blue light is flashing. It then displays a box say "check signal digital analog." please help me. Thanx.


This blue light flashing means there is power to monitor bu NO video\015\012signal. No Analog or digital Video . analog is the regular plug for PC\015\012to Monitor, the other is HDMI digital or other digital. Check signal\015\012digital/analog means ... Samsung Syncmaster 940BW LCD Monitor

Problm with viewsonic va712b


Sounds like the operating mode is at a frequency or refresh rate that is outside the viewsonic operating specifications when in normal mode. possible solution: in safe mode access control panel, system, devices (hardware) and look for display. do a r ... ViewSonic VA721 17" LCD Monitor

Monitor says no input signal


Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.\015\012\015\012Boot your windows in safe mode (tap F8 befo ... PC Desktops

Blank screen Help. I have a compaq presario sr1103wm. When I turn on the computer the monitor acts like it is getting no power. Also the keyboard lights don't come on. I tried replacing the video card and got the same results. I also tried a different monitor and cable with still the same results. Does anyone have any sugestions. Could it be the mother board?


When you say "When I turn on the computer the monitor acts like it is getting no power", do you mean the light on monitor doesn't come on or it does and it states it has "No Signal"? If it says no signal then it is receiving power just no signal from ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Http/1.1 internal server error


You need to be using Internet Explore 6.0 or better or FireFox 3. These 2 are the most common browser, if you are using something else, then you need to find out from your ISP, if that browser works with their network.\015\012you need to call y ... Dell Inspiron 1300 Notebook

Monitor has no picture


Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel

ViewSonic VX2035wm flashes on and off randomly


... ViewSonic VX2035WM LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Viewsonic monitor lcd to laptop problem


... Computer Monitors

Can't get monitor to connect


There are a few things to look at. It is very obvious that the screen is in good condition since you can see the message on it. Now the problem lies with either the RAM and/or the VGA. If you are using an onboard VGA, try a PCI VGA card. Try to r ... Samsung SyncMaster 2233BW 22" LCD Monitor

No analog signal


Sounds like the graphics card is gone belly up. Try the monitor with another pc or just replace the graphics card.Hope this helps ... ViewSonic VX2235WM Monitor

I cannot restart my PC AllI get is a note saying NO SIGNAL ANALOG


I had a problem like that ,my tower got bumped and fell over. the heatsink and processor fell off. i had to remove processor (p4) from heatsink and make sure all the pins were straight and aligned properly. i cleaned both parts with alcohol. i then ... Gateway GT5058 Desktop PC

Error message on Syncmaster- check signal cable


Sounds like it might be a graphics card. if u have an old graphics or vidio card, open the case and remove your card then install the old one. if it works now youll know your card is bad. If u have an old video card and an open pci slot install i ... Samsung SyncMaster 940B Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5399 seconds