Having problems with your ViewSonic NextVision N1700w (Black, Metallic) 17" LCD Monitor ?

Not displaying in DVI or RGB mode and not able to turn-off.

\015 Screen remains entirely black. \302\240Light at power switch remains yellow.\015\012\015\012Have swapped monitors and find PC displays in both DVI and VGA/RGB mode.\015\012\015\012Some small, colored vertical lines still displayed on N1700W monitor.\015

Answers :

Hi
\015\012
\015\012This issue can be due to loose connectors inside the monitor or may be due to a backlight failure. You'll need to check for the connectors inside the monitor and also for any other burnt components that are visible. If you have technical expertise and/or have opened your tv earlier then you can try and check for above things else i'll suggest you get it done from a tv tech.
\015\012
\015\012Please do accept this solution and revert for further assistance.
\015\012
Thanks
\015\012Rylee
Repair Help & Product Troubleshooting for ViewSonic NextVision N1700w (Black, Metallic) 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not displaying in DVI or RGB mode and not able to turn-off.


Hi\015\012\015\012This issue can be due to loose connectors inside the monitor or may be due to a backlight failure. You'll need to check for the connectors inside the monitor and also for any other burnt components that are visible. If y ... ViewSonic NextVision N1700w (Black, Metallic) 17" LCD Monitor

My HP 2009m goes into sleep mode & shuts down


I just bought a 20 inch HP 2009m monitor about 2 months ago.One of the functions within the monitor, is to go to 'Sleep' The Sleep mode is to keep the monitor active, but using very little power.(I always turn mine off w ... PC Desktops

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Trying to connect Inspiron 6000 to TV


If there is no display on your TV, HDTV, or Projector, please make sure that all of your connections are set up properly and that you have enabled the display in the Catalyst Control Center. \015\012The connectors that you will be using would b ... Dell Inspiron 6000 Notebook

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.


This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

I have a Dell GX60 and I changed the display resolution and


So, with The computer, completely turned off, Turn it on, Can't you see the BIOS screen? , or a Dell LOGO?It is when you see this BIOS or Dell logo Screen that you Need to:\015\012\015\012PRESS F ... HP Pavilion F1503 15" LCD Flat Panel Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

No picture or power green light just blinks - Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor


Carrizosas, Tell me more. How old? Approx. total "ON" hours of use? Did it display a "bright, crisp, full color text and graphics and pictures the day before? Does this unit have a lay on floor "BLACK BRICK" ac to dc supply, or only a 3 wire line cor ... Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.


No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

DVI connection fault


Same problem this morning. wondering if the money i spent was well or not.not happy. ... ViewSonic VX2255 Monitor

Lg monitor powersave mode and randomly turning off on ps3


No display , Power on , LED Blinck Samtron monitor ... LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Moniter activation when turning on the cpu


First, I would make sure that the latest drivers for the video card are installed. If the video card is from a major manufacturer, then Windows Update might even provide them.\015\012\015\012Next, try booting the CPU into Safe Mode (hitting F8 when ... E-Machines W4885 PC Desktop

Extenced Display Identification Data from Monitor's DVI Port is Incorrect


... Samsung SyncMaster 245BW Monitor

Samsung SyncMaster 17" LCD Blacks out


If you have a second monitor, you could use your computer until the monitor goes black... then plug in a replacement monitor. My guess is that one will display black too...\015\012\015\012My gut feeling is that your VGA card is on the fri ... Samsung SyncMaster 17" LCD Monitor

Monitor screen stuck at input not supportedhow do I go back ?


Assuming you have not changed the connection to your monitor (from VGA to DVI signal, for example), or that you have not messed around with the display settings, further below may be the situation. Else, you need to access your LCD menu and choose t ... HP Computer Monitors

Year old advent netbook 4211b will not turn on,


When you press power button press F1 or F2 or "del" key if you can see bios screen then you not need to refix RAM memory or reset bios.IF you can see bios screen then lake sure harddisk is detected and SATA is disable then save settings and exi ... Advent Netbook

My hp l1706 wont stay on it goes blank after a few sec when turn on please help me out how can i stop this


Huntpercell, You won't !! The unit's "switch-mode-power-supply" is in what is known as "SHUTDOWN" mode because it has detected a FAULT with itself or the "cold-cathode-fluorescent-lamp's" electronic ballast circuit which is called the INVERTER circui ... HP L1706 17" LCD Monitor

I have a Sceptre x22 gamer that has been serving me well for about two years. A week ago I started having trouble getting the monitor to ''Wake Up'' after the computer goes to sleep or when rebooting. It has become so bad recently that I had to turn the monitor on and wait 15 minutes before it would start to display anything. I don't think it is an issue with the inputs as there is usually a blue display that comes up whether anything is plugged in or not. Usually you are able to switch modes wh


My problem with my Sceptre 22 Gamer monitor started today. I had a space lcd which I connected and the spare works fine (not a computer or connection problem).\015\012\015\012It sounds like these monitors are somehow engineered to fail a ... Sceptre x22wg Gamer Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7473 seconds