Having problems with your View and View Technologies Computer Monitors ?

Where is the power source? Monitor came with no cord and cannot locate the power source input.


Answers :

I am not sure exactly what type of monitor you are referring to.
But if it's a computer monitor.....

Since I do not know the specific brand and model I can not give you exact location. However there has to be a power input port some where on the back of the unit. It may even be set back up under the back end.
It is a female type port with three prongs in a roughly triangular shape.
It is identical to the power cord used on desktop computers.
It may also be that it originally came with the power cord attached internally but has been pulled out.
If you are referring to another type of monitor or you still are unable to locate it please repost with specific details regarding the make and model.
Hope this helps.
On the back of the monitor you should find three prongs that plug onto the female end of the power cord. The monitor power cord will look the same as your computer cord.
Repair Help & Product Troubleshooting for View and View Technologies Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where is the power source? Monitor came with no cord and cannot locate the power source input.


I am not sure exactly what type of monitor you are referring to. But if it's a computer monitor.....Since I do not know the specific brand and model I can not give you exact location. However there has to be a power input port some ... View and View Technologies Computer Monitors

'input not supported'


All I can say is WOW! I have been using my pc with my monitor for months and I was installing a new printer and must have wiggled something loose, and all I was getting out of my monitor was "INPUT NOT SUPPORTED." So I came to this forum, and low a ... Acer AL1916W 19" LCD Monitor

Front panel lights blink on/off once per second


Hey,\015\012 I would like to agree to the diagnosis that you have done on the monitor . Thanks for a well complied solution. You can try the following website\015\012 ... Dell UltraSharp 2005FPW 20.1" LCD Monitor

My dell flat panel monitor wont come on


Normal 0 false false false MicrosoftInternetExplorer4 \015\012 /* Style Definitions */ table.MsoNormalTable\011{mso-style-name:"Table Normal";\011mso-tstyle-rowband-size:0;\011mso-tstyle-colband-size:0;\011mso-style-nosh ... Dell E173FP 17" LCD Monitor

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

CPU doesn't turn on!!


\015\012\015\012\015\012\015\012\015\012Power supply light on or flashes\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure ... PC Desktops

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

LG1717S - Power light flashing - no image.


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG L1717S-BN 17" LCD Monitor

I have the same problem!


Hi Robert,\015\012\015\012The monitor is on protect mode because an internal fault had been detected.\015\012\015\012To start unplug monitor from power and from computer and test computer with different monitor to find out if it is ... Microtek C893 18.1" Flat Panel LCD Monitor

Monitor power light is blinking and cannot see anything.


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... TDV Vison TDV FV19B 19" Flat Panel LCD Monitor

BLUE LIGHT BLINKS BUT MONITOR SCREEN REMAINS BLANK


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... Gateway FPD1975W 19" LCD Monitor

HDMI/DVI input problems


You could try opening the housing, with the power cord unplugged. Find the location on the circuit board where the HDMI/DVI port interface with the circuit card. Check the condition of the solder joints and look for signs of a cold joint or bad conne ... Gateway FPD2275W LCD Monitor

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

My monitor has gone blue, what do I do - LG W1934S-BN 19" Monitor


Assuming the monitor is powered (if unsure, check the that power cord is connected to a live 120 volt source and the other end is connected to the monitor), check the data (analog VGA or DVI) cable between the monitor and the computer. Make sure the ... LG W1934S-BN 19" Monitor

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

Dell monitor dialog box says monitor is in the power save mode


Actually, it most likely is not the monitor which is in "power save mode", it is the computer itself.\015\012\015\012When you cannot get a computer out of "power save mode" by any other means, typically the cause is that ... Dell Dimension 2400 PC Desktop

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

Cd drive My cd writer will not open, how can i fix this?


1.If the keyboard has a CD/DVD Eject key, press it. The Eject key is usually placed by the volume knob and is marked by a triangle pointing up with a line underneath. 2.Double-click My Computer . 3.Right-click the icon for the CD, CDR ... HP Pavilion a1330n (EL466AA) PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed


Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

The disc arm for the bravo disc publisher primera is telling me that the disc was not picked up, and to press the left button on the machine to try again. I have done this plus I have turned off both my computer and the machine to see if the settings reset. is there any thing else I can do to fix this problem? the machine is new so shouldnt be experienceing such problems


Hi, i think you already need to clean your equipment.this is part of the manual of your equipment and follow their tips to prevent damage.go to this link: http://www.primera.com/manuals.html to download the f ... Bravo PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1455 seconds