Having problems with your VIA C3, 800 MHz (VIAC3800) OEM / Unboxed Processor ?

Who to overclocke my motherboard'z FSB or my processor?

\015 Hi sandew\015\012i have a serius problem.i wanna know what i can do to get up my CPU up to 1GH or more; or how to get up my FSB which is at 133Mhz.\015\012this is the description of my PC:\015\012Mercury PVCLE266M_L with Onboard PRO 2000+ Processor\015\012133Mhz FSB\015\012VIA C3 CPU onboard\015\012512+256 Mhz RAM\015\012I haven't seen a command about in the SETUP BIOS\015\012please if you what i can do to overclocke my motherboard ; i will be happy to know.thanks\015

Answers :

Hello.
\015\012It is not save for your system making it work faster by overclocking it.
\015\012Some times it works fine just using the right cooling methods, but some times its leads to system freezes, crashes and even to permanent processor damage.
\015\012So i advice you to keep that in mind.
\015\012
\015\012If you want to proceed anyway.
\015\012- In newest computers you will find an option to set the processor speed to automatic( system recognize the cpu speed) or manually, in the last one you hve to set the RATIO( Processor speed divided by FSB speed), this means:
\015\012- The FSB of your P3 Motherbord (133 Mhz) x 7.5(ratio)= 1Ghz
\015\012- In older motherboards the speed option is set using jumpers
\015\012configuration in the Board, inthat case you will have to use the motherboard manual( some boards have printed tables) to show you the config.
\015\012Note: if your motherboard doesn't show you the RATIO you need is because it doesn't support that speed.
\015\012
\015\012Good look.
Repair Help & Product Troubleshooting for VIA C3, 800 MHz (VIAC3800) OEM / Unboxed Processor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Problem in overclocking my Processor.


You problem is with your high overclocking dont increase your fsb very high like 20-50 increase it 5-10 when ypu remove your plug and your pc is overclocked too much then your motherboard reset all the values to default try to go little slowerthe te ... Intel Computer Processors

Need 2 install the fastest PIII processor possible on CpxJ650GT


You obviously seem to have the adequate knolledge so why dont you overclock it...\015\012overclocking used to be a touchy subject but know its undrstood that that it creates no problems..the chips are designed to be overclocked,in fact overcloc ... PC Laptops

How to overclock a pentume 4 processor - Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor


When starting/rebooting your pc, repeatedly press the delete key to open the BIOS, if the delete key does nothing (you can tell if does nothing it you see you windows xp/vista boot screen), reboot again and try to see if it says anything about settin ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

How to get AMD athlon 3700 socket 754 engineering sample cpu run at proper speed


Here's a little history\015\012http://compreviews.about.com/cs/pchardwarebasics/a/aaBIOS.htm\015\012\015\012More advanced st ... Computer Processors

How do i change the memory bus speed on my dell optiplex 170l? The CPU is an Intel Celeron 2.4GHz. The mother board processor speed is 400MHz and the Bios indicates a memory bus speed of 266MHz and does not seem to have an adjustable option. If the CPU can run at 400MHz then why can't I get the memory bus to run at 400MHz? Origanuly this system was shipped with 2 X 128MB 333MHz DDR CL2.5 Non-ECC DIMM modules and yet the bios indicates memory speed at 266MHz.


The following is stated upon your computer being a Dell Optiplex 170L1) The BIOS program, and version that's on your Dell Optiplex, does not allow voltage changes, nor FSB changes, nor changing ram memory parameters, manually. ... Dell OptiPlex 170L PC Desktop

Who to overclocke my motherboard'z FSB or my processor?


Hello.\015\012It is not save for your system making it work faster by overclocking it.\015\012Some times it works fine just using the right cooling methods, but some times its leads to system freezes, crashes and even to permanent process ... VIA C3, 800 MHz (VIAC3800) OEM / Unboxed Processor

Upgrading the CPU


Overclocking is adjusting the speed of which a cpu works at (processor = cpu) replacing a cpu is not overclocking and wont cause any problems aslong as the cpu is ment for the motherboard and is supported. depending on the motherboard you may not be ... Acer Aspire 5315 Notebook

Overclocking can i overclock aspire am1100-e1401b


I never overclock my processors... because I have fried a couple.\015\012\015\012AND I don't really need any extra power/speed... because now I only surf the web and do some Word/Excel stuff and my duo core Intel chip is awesome for that. ... Acer PC Desktops

How do I overclock a Celeron 733mHz PGA370?


I have a hp 6730 ,originally a celeron 600mhz... which currently runs at 1.1 gig ,i used a 733 celeron and a linlin adapter . the lin lin is jumpered to let the clock speed go to 100 mhz.. . the only reason it can be overclocked is "the chipset. ... Intel Celeron, 600 MHz (SL46U) Processor

Toshiba L305-S5944 T 3400 Want to upgrade ???processor the bus speed is F/S bus speed is 667 can I break this Limit?? with a processor??? are is that it fast as it will go??? what does efect the board speed bios? or the controler? on the board??? T5800 came in my thinkpad has a board speed of 800Mh now have a T7870 1066 init doies my board run the new speed or the same???????? signed Obsest


Hi,With laptops you are severely limited with what you can do regarding the processor. It's highly unlikely that you will break the 667 front side bus barrier at all. A laptop BIOS just doesn't support CPU overclocking and neither does a ... PC Laptops

I want a faster processor using the one I have now............


First off, there is no pint in overclocking a celeron, on top of it a laptop, u may just end up ruing every thing.but if u still insist... there are softwares' which can help u...http://www.overclock.net/downloads/255892-setfsb-2-0- ... HP Compaq WF1907 Monitor

Foxconn or my processor fried while i tried to overclock my comp


Foxconn are miserable at overclocking and X2 - 6000 is a proc already overclocked from factory - you can't push it any further without a serious water cooler.\012Reset the BIOS and hope it will start again, otherwise you will need at least a ne ... PC Desktops

How can I overclock my 166mhz classic computer?


Get a Pentium 4, shove it in your *** full of ****\012and it will become a Socket 7 processor.You can then insert it and it will run at Pentium 4 clockspeedand FSB!Try it! ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

Is it possible to overclock the processor on the v2000 cause i upgraded my processor from a 1.5ghz to a 2.00ghz but when i go to control panel and click on system it shows 2.00ghz then next to that it shows 1.5ghz not sure why and not even sure if overclocking would help but when i had the 1.5ghz it showed 1.5ghz next to it so im wondering if that is the speed its actually running at


Hey, that's Excellent! Did you use one of the Pentium M 755's?(sSpec number, SL7EL, SL7EM. 2GHz maximum operating frequency rate. 2MB L2 cache, 400MHz FSB. 20x multiplier)It may be a limitation with Windows. (Don't know of any BIOS ... HP Compaq Presario V2000 Notebook

I have dg31pr motherboard & 2.53Ghz processor with 2Gb of ram & 512 graphics card .i want to overclock my processor for the sake of extrem gaming purpose.please guide me.thankyou


Go into the bios when your computer is booting up.\015\012then change processor speed.\015\012dont overclock it too much or it will explode. ... Computer Processors

COMPUTER Sir nice to see ur specialty on the expert's lounge! What is the best combination when assembling your own PC with regards to all its components giving the user the best option.


I start out on the Asus site. I ask the customer what they need the computer to do. Then I look up the chipsets on the motherboards to see what they are capable of. If you want good graphics for photo programs, or gaming, you would want a good gra ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

Raising stock processor speed.


Sorry my friend but Dell doesn't support overclocking.You need a new motherboard and power supply and a better cpu heatsink to overclock your Dell. You would need extra fans too. They lock there BIOS settings as far as 1:1 clocking to prevent trouble ... Dell Dimension 3000 PC Desktop

Processor fan not turning


Failure of motherboards/processors due to thermal errors is usually due to breaking capacitors or overheated cases. In places with heavy dust build up this can cause components to fail due to heat issues. A few years ago a capacitor company sto ... HP Compaq Business Desktop d330 Slim Tower

I have pentinum4 intel(R) celeron processor 1.3 GHZ processor. I want to increase the speed of my processor without any hardware change. I have 40 GB HD & 512MB with windows XP RAM.plz help


You cannot change the speed of your processor unless your processor supports overclocking. however your processor does not support that.\015\012\015\012if your computer is running slow try upgrading the RAM to 1GB.\015\012also check ... Intel Celeron D 335, 2.8 GHz Processor

Overclocking i want to increase the speed of my processor i am having a intel(R)4


First off... be warned overclocking is not for the faint of heart... now let us begin...MAKE SURE YOU HAVE ADEQUATE COOLING!!!!I can't stress this out enough if you plan on overcloking it's worth spending some money on some fa ... Intel Socket 478 CPU COLLING FAN & HEAT SINK up to 3.2GHz

PC stops on processor initialization during boot up.


Yor processor probably overheats!\015\012Have you overclocked before, of left it on for weeks at a time. Or check if the fan is not working!\015\012Take the fan off, and pull the processor out and have a looksee.\015\012\015\0 ... AMD Athlon 64 X2 3800+ Dual Core Processor - Socket 939 (AMDX23800)

Starting problem. I have change my porcessor 1.6 to 2.8 there after my system do not start, power supply is ok . There is no beep sound and no display.


Well there are MANY things to consider and to do when changing the processor: Is your motherboard able to accept the new chip (speed, manufacturer, socket type...)?Did you set all of the jumper on the mother board correctly ac ... PC Desktops

Overlocked my Intel Pentium 4 3.00 Ghz


You have to go into your bios and see what your front side bus and memmory speeds are. If you overclock you cpu, sometimes you need to underclock your memmory. Say step your memmory down to 333mhz and overclock your front side bus(fsb).\015\ ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

Overclocking my pc is a compaq presario desktop its p4 2.93GHz help me how to overclock it like overclocking all components


Are you sure that your pc is built for overclocking? dont be risky it might get you trouble on your pc. i suggest that you shouldnt overclocking it and besides your processor is high ed.\015\012\015\012\015\012CHARCOIS ... Intel (P42000400256SK478) Pentium 4, 2 GHz (p42000400256sk478 ) Processor

Processor update.. I currently have a Acer Aspire AM1100-U1402A desktop pc with a Acer F690GVM mobo. It currently has an AMD Athlon 64 X2 Dual Core 4400+ (AM2 socket) 2.3 Ghz CPU installed. And now i would like to update my processor to a faster and better and im curious how far i can go. If you have any tips about any good processors i could use you are welcome to post aswell :)


The problem with Store bought PCs is that there is no way to tell how fast a proccessor you can safely put into one before it becomes overclocking, but in theory your exact motherboard should support an AMD Athlon X2 5800+ 1000 Mhz FSB. Now if your w ... Acer Aspire M1100-U1402A Refurbished AMD Desktop PC - AMD Athlon X2 4400+ , 2GB DDR2, 320 SATA II, D
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0630 seconds