Having problems with your Vantec Thermalflow Double Ball Bearing Cooling Fan Case Cooling Fan, Temperature Monitoring Device ?

No display on Monitor. Its goes Black Right from the start.

\015 My cpu doest gives display on the monitor..I tried 2-3 monitors bt the same problem exists.The screen is black..Not even shows any notification for NO DISPLAY DEVICE or anything like that..Pease help me.!!!\015

Answers :

If your computer boots correctly and there is no beeping or warning tones coming from it and you have tried several monitors I would say that your video card has died

if your computer supports it you can obtain a new one at your local best buy, walmart ect or you can order one very cheap at the following links

you may have a geeky neighbor or computer nerd like me have a quick look at it so you can see what slots are available and see what card your PC will support

link 1

link2

I have used both these places many many times and found them to be very reputable

I hope this helps good luck
Repair Help & Product Troubleshooting for Vantec Thermalflow Double Ball Bearing Cooling Fan Case Cooling Fan, Temperature Monitoring Device

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Monitor goes black but shows icons...


I'll assume this is an LCD panel screen.If what you are saying is the screen shows up and then goes dim or starts dim, and you can see a dark image of the system starting up and then displaying Windows...Your problem is a bad ... HP vs15 15"LCD Flat Panel Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Thinkpad R40 display good for a few minutes, then spazzes out


Hello,you've really been using this laptop for a long time (6 years). From the information you provided, I discovered that the fault is most likely from the flex the connects from the screen to the mother board.I t ... IBM ThinkPad R40 2897 Notebook

Black screen after replaceing lcd monitor


I don't know what the other people have been telling you, can you start up in safe mode, then right click on your my computer, or computer. its either on desktop or in start menu.click on manage from the right click menu.on th ... HP Pavilion zd8000 Notebook

If we close the screen a little bit it goes bright white. Have to switch off and restart. Also, after doing a power point presentation the display is only opening about 80% of full screen with a black strip down the right hand side and 1/2 inch grey at the bottom. How do we display the screen to be 100%? Thanks


Installing the correct drivers for the GFX card and setting the correct NATIVE RESOLUTION should fix that issue...\015\012\015\012\015\012\015\012Try playing around with other resolutions (right-click empty area of\015\012Desktop->Properties ... ASUS PC Desktops

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

Monitor Goes Black


Every now and then I inadvertently push a button on the lower right side of the monitor that causes the display to go blank as if it has stopped receiving a signal from the computer. Unfortunately I can not recall what the settings or buttons are tha ... Gateway FPD2275W LCD Monitor

Problem with Fan - Dell Laptop Inspiron B130 ?


Hello,\015\012\015\012If the fan is dead, then the laptop will shut itself off after a short while to prevent heat damage. It is normal for the fan to spin up when you turn on the laptop and then stop turning. The fan will kick in again w ... Dell Inspiron B130 Notebook

I have a VX1962WM monitor. When I power up my PC I can see an image briefly then the screen goes black. When I power the monitor down and back up I again see an image briefly and then it is gone. I have tried this on two computers and have the same problem on bothh. Any suggestions? From this page it seems to be a backlight inverter?


That's right, the problem is related to inverter, but source of it - backlight lamps (if you see an image for fractions of seconds) or MOSFETs (if you see an image for few or more seconds). Image shows up, that means inverter starts, but then goes of ... ViewSonic VX1962wm LCD Monitor

Monitor Display Offset


Hi HarryH,\015\012\015\012\015\012Sounds like the web cam software may have changed a .dll or some other system file that the video chip is using. I would try uninstalling any software from the cam and removing and reinstalling the video drivers.\015 ... Kogi l4bx-na ko 14.1" Flat Panel LCD Monitor

Monitor flashes image for split second then goes blank but green LED flashes as well


Have you checked the capasitors?,if they,re ok then the proublem is one of the transistors it will have the letters DKQA on it ,they control the backlight power ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

No display on Monitor. Its goes Black Right from the start.


If your computer boots correctly and there is no beeping or warning tones coming from it and you have tried several monitors I would say that your video card has died if your computer supports it you can obtain a new one at your local bes ... Vantec Thermalflow Double Ball Bearing Cooling Fan Case Cooling Fan, Temperature Monitoring Device

The graphic software failed. no display - HP Pavilion dv6000z Notebook


When you turn the computer on, do you see the HP logo? \015\012\015\012If you don't, keep the computer on and try holding the computer screen under an overhead light at an angle. If you see a faint image of anything on your monitor, then ... HP Pavilion dv6000z Notebook

No display at all


Hi,from what you have mentioned it seems that, it can either be one of the following situation1) you see the power light, hp/compaq logo and the windows startup logo but don't see any logon screen or desktop2) you don't even s ... HP Pavilion DV5234US Notebook Laptop

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

LCD display Proview


I would look on the power supply board and check for any capacitors that are bulged or popped. They look like little barrels with a cross or 3 line star on the top. This is the vent and it should split before the capacitor pops like a firecracker or ... Proview PL913S 19" Flat Panel LCD Monitor

After Windows has started and the setup screens show, my Kogi monitor says "out of range" and the screen goes black. How can I fix this?


When you switch from a CRT to LCD, your refresh rate will decrease. This is \015\012easily completed by changing the refresh rate on your computer. To make this \015\012adjustment please connect your old CRT monitor to your computer.1) Op ... Computer Monitors

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

I have this monitor.. For some reason at times the screen goes completely black. Actually it fades white, and likes drowns da colors of what ever is on da screen, than it fades black and stays black. When this occurs, it normally would take ten or more minutes to snap by to regular as tho nothing just happened and goes back into working normal until the next occurance. Now a days it's been doing it more and it doesn't seem to want to snap back anymore. Its a HD monitor but I don't have it set up


This is your graphic driver related issue.For that when you power up the computer press F8 key then enter in "Enable vga mode".Then go to start menu ->control panel->display property->settings.Change screen resolution to 1024*76 ... Samsung 2333SW 23" Widescreen DVI LCD Monitor

Toshiba satellite a135 monitor goes black


You could have a defective screen - a defective inverter or a CCFL lamp.To determine if you have a LCD screen or video card problem, read this and follow the instructions.Defective CCFL backlight, it may have the following symptom: ... Toshiba Satellite A135-S2386 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7809 seconds