Having problems with your SVA-USA SVA VR 15A 15" Flat Panel LCD Monitor ?

New flat screen SVA VGA 15" monitor works fine as long as I boot up with my old monitor then switch plugs...Enabled vga mode, booted up to the windows xp loading screen then quit and will not boot up the display screen beyond the windows xp loading frame.


Answers :

With your old monitor connected, set the display to 800x600 or 640x480 (or another low setting) and 60Hz (in advanced settings). Shut down completely. Connect your new monitor, and start up.
\015\012
\015\012After windows boots, set the settings to where you want them. The refresh rate may be the problem here.
Hi,

It sometimes takes up a minute for video card to detect new moitor. Try attaching new monitor only and boot it in save mode.

Mark
Repair Help & Product Troubleshooting for SVA-USA SVA VR 15A 15" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New flat screen SVA VGA 15" monitor works fine as long as I boot up with my old monitor then switch plugs...Enabled vga mode, booted up to the windows xp loading screen then quit and will not boot up the display screen beyond the windows xp loading frame.


With your old monitor connected, set the display to 800x600 or 640x480 (or another low setting) and 60Hz (in advanced settings). Shut down completely. Connect your new monitor, and start up. \015\012\015\012After windows boots, set the ... SVA-USA SVA VR 15A 15" Flat Panel LCD Monitor

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

SVA VR 15A flat screen monitor does not complete boot up.


It sounds like that monitor has a leakage problem on the ground or shield. This is a common flaw that forces intel motherboards to keep from booting. If you carefully cut the outermost layer of monitor cable away (it looks like a basket weave made ... SVA-USA SVA VR 15A 15" Flat Panel LCD Monitor

Randomly lost display on my pc.. and its not a faulty card.


Try to set your PCI-E card as a first one in BIOS. There also should be an option to turn off onboard video. ... Gateway GT4022 PC Desktop

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

The screen turns black and stays like that


Normally it's because the resolution is set too high for the monitor. This has happened to me when I switch a computer from a flat screen to a old "biggy-size" monitor.try rebooting the computer and BEFORE you see the windows splash scre ... Apple Computer Servers

Computer monitor becomes distorted after boot up.


Hi,\015\012 \015\012Download and install the correct driver for the monito as well as the deiver for your video card, if the video is onboard, you may need the motherboard and AGP driver as well.\015\012You will pro ... HP PC Desktops

Laptop to TV connection problem


When your laptop boots up, Windows treats the second monitor (your TV) as a mirror of the primary monitor (your laptop screen). When Windows loads up and finishes initializing the more advanced features, it goes back to it's default setting of a sin ... IBM PC Laptops

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

I have a virus on my computer Toshiba Satellite


You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

Screen will not display


Hi,Have you ensured that your display card driver AND correct monitor driver is installed. This is to make sure that your display card only generates signals that your Acer monitor is capable of handling. If you do not have the driver CD for yo ... Acer H233H bmid Monitor

My computer wont boot up the fan and light turn on for a second then goes right off....


Follow these steps to determine why your computer won't turn on.\015\012\015\012Computer shows no sign of power ... HP Pavilion dv9000z Notebook

My HP Notebook first showed a black screen and then after a hard shutdown and restart it only shows a black screen with colored lines. It seems that it is starting up even though I can't see the screen.


Try this,Start in VGA mode.Once started,update your video drivers\015\012\015\012To use a Safe Boot option, follow these steps: \015\012\015\012Restart your computer and start pressing the F8 ... Microsoft HP Pavilion DV6276US Notebook PC

Screen says mode not supported h:53.4khz v;84.ghz


You should reboot your computer. Immediately after you see the BIOS splash screen (Dell, Acer, HP, etc...) start pressing the F8 key 2 times every second. If you're quick enough, you'll get the Windows boot menu. When you see the menu, select "VGA ... HP Compaq d530 CMT Intel Desktop PC - Intel Pentium 4 2.8GHz, 512MB DDR, 40GB HDD, DVD-ROM/CD-RW, Gi

I was watching an exercise DVD this morning on my Vaio and after about half an hour the image on the screen was replaced with different coloured blocks / stripes. I had to turn the computer off with the power switch. I think the fans were blocked and it overheated - is this a temporary problem that will resolve when the laptop cools down?


There are 2 likely causes for this problem. 1, the screen is damaged. 2, there is a problem with the connection between the screen and the motherboard. The latter is the most likely.\015\012Do you get the lines w ... Sony PC Laptops

I have an NEC S970 laptop and cannot boot it


May be this can help you if not contact me [email protected] f8 goto enable vga after login just set the resolution into 800x600 then restart the laptop in normal mode or els c ... PC Laptops

Monitor says: "Out of range" - BenQ FP767 17" LCD Monitor


It means your system display card settings are too high for your monitor. Boot your system into safe mode and set the display settings lower. Right mouse button click on an empty space on your desktop and go to properties. Then settings-& ... BenQ FP767 17" LCD Monitor

Intstalled starlogic moniter to PC and got error message


Hi,\015\012the "Out of Range" message usually appears when the video card is putting out a video resolution or frequency that the monitor isn't able to handle. You should reboot your computer and BEFORE the Windows screen shows up, press the F ... Computer Monitors

Dell LCD monitor has flashing lines, color distortion; random


I'm not an expert but I will give you a couple suggestion, who knows might help might not. It's worth shot.\015\012 First open your internet explorer, when webpage comes up, go to the top of you screen and click Tools, Internet Options, Advanc ... Computer Monitors

N10 white screen


I think this is an issue with your desktop settings are your display driver. Reboot the notebook, unplug the external monitor. Press the F8 key when you see the Windows logo screen. It will give you a list of choices. Use the the VGA selection. ... E-Machines PC Laptops

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0876 seconds