Having problems with your Star Logic 17" LCD Monitor ?

I've turned the monitor off and on for about 50 times now and each time I turn it on, it only stays on for about a second and then it turns off automatically.


Answers :

This unit has had a component failure in the power supply board. The unit should be sent or taken to a service center for a complete testing and servicing. The customer support website is www.fourstari.com. They should be able to tell you how to get service for you problem. I hope this information helps you with your problem.

\015\012\011 \015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012
\015\012\015\012\011\015\012\011\011\015\012\011\011\011\015\012\015\012\015\012\015\012\015\012\011\011\011\015\012Welcome to Fourstar Group's customer support site.\015\012\011\011\011The purpose of this Web site is to enhance the support services we provide \015\012\011\011\011to our customer's customers. We've provided a number of resources here to \015\012\011\011\011help you report and resolve problems, suggest improvements and learn \015\012\011\011\011about our products.\015\012\011\011\011
\015\012\011\011\011\015\012 \015\012\011\011\011\015\012Things to have on hand for support\015\012\011\011\011\015\012
    \015\012
  • \015\012\011\011\011\011Item # \015\012\011\011\011\011
  • \015\012
  • \015\012\011\011\011\011Model #\015\012\011\011\011\011
  • \015\012
  • \015\012\011\011\011\011Original receipt\015\012\011\011\011\011
  • \015\012
  • \015\012\011\011\011\011Store name \015\012\011\011\011\011
  • \015\012
  • \015\012\011\011\011\011Purchase date\015\012\011\011\011\011
  • \015\012
  • \015\012\011\011\011\011more\015\012\011\011\011
\015\012\011\011\011\015\012\011\011\011\015\012\015\012\011\011\011
\015\012\011\011\011\015\012\015\012\011\011\011\015\012Technical Support Information\015\012\011\011\011Technical support is offered Monday - Friday* \015\012\011\011\011*9 a.m. to 5 p.m. (EST).
\015\012\011\011\011\015\012\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011*Closed major holidays \015\012\011\011\011\011\011\011\011and the day after Thanksgiving
\015\012\011\011\011\015\012\015\012\011\011\011\011\015\012\015\012\015\012\011\011\011\011\011\015\012Phone :\015\012\011\011\011\011\011\015\012(508) 435-4830 or \015\012\011\011\011\011\011(800)-639-3803\015\012\011\011\011\011\015\012\011\011\011\011\015\012\015\012\011\011\011\011\011\015\012E-Mail :\015\012\011\011\011\011\011\015\012\015\012\011\011\011\011\011\011 \015\012\011\011\011\011\011\011[email protected]
\015\012\011\011\011\011\015\012\011\011\011\011\015\012\015\012\011\011\011\011\011\015\012E-Mail :\015\012\011\011\011\011\011\015\012\015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\[email protected]
\015\012\011\011\011\011\015\012\011\011\011\015\012\011\011\011\015\012 \015\012\011\011\011\015\012Services \015\012\011\011\011Automatically submit!*\015\012\011\011\011\015\012
Repair Help & Product Troubleshooting for Star Logic 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitror keeps cycling through on-off


I had the same problem used with my mac mini using the DVI connector. The problem continued with the monitor not plugged into anything.\015\012\015\012The Solution: When I unplugged the monitor cable from the monitor & cycled the power for the monito ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

X2gen mw19u 19'' widescreen monitor going black


X2GEN - MW19U, same problem as described in the other posts. A week ago after a reboot it did not turn on. Pressed the power button, it turned off. Pressed it again after about a minute, all was fine until this morning. Same as before except t ... X2Gen MG19MY 19" LCD Monitor

Monitror keeps cycling through on-off


Found one of these in the dumpster at my shop today. Had the "stays on for 3 sec then turns off" issue. Problem is the bad batch of electrolytic caps of a few years ago. 2 on the power supply board were visibly swelled up (470u/16V and a 1000u/16 ... Envision EN-7220 17" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

Monitor keeps shutting off after a few seconds- hp dv4000notebook


You may have a defective CCFL backlight, it may have the following symptom: Screen flashs on red/pink and off. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture flickering on and off. All ... HP Pavilion dv4000 Notebook

The picture disapears, though the monitors stays on - every few seconds


Check the cable connections on the back of the monitor and the PC it sounds like the connection isn't made properly make sure they are tight. ... BenQ FP71E+ (Black, Silver) (Silver, Black) 17" LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Display goes blank when brightness is above 70 percent


This is a generic symptom that could happen to any LCD\015\012monitor.\015\012\015\012The following is a generic answer applicable to most.\015\012\015\012\015\012\015\012Two possible causes are bad capacitors or a bad light inside\ ... Mag Innovision LT776s 17" LCD Monitor

Fujitsu-Siemens P15 TFT power/picture problem. it take time to turn on.


It does indeed sounds like the capacitors, I had this problem last year with a Medion monitor where it would turn on and off, when I spoke to Medion they did say that it would need a repair but at the time I wasn't enclined to pay the repair fees for ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

Monitor going black


My HP f1703 is almost 3 years old and started having this same problem. My fix got the display to stay on. Don't know how long this fix will work. I set the monitor brightness to 51 and contrast to 41. You may have to adjust to your levels to your ap ... HP Pavilion F1703 17" LCD Monitor

Lg flatron w2234s monitor is flashing ??


HI,\015\012\015\012thank your for choosing Fixya.com\015\012\015\012go to control panel and look power option.\015\012\015\012Go to power scheme\015\012Select Turn Off Monitor "20mins"\015\012Select tur ... LG L1932TQ LCD Monitor

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Microtek 997M monitor doesn't stay on...


The inverter is the most common item to fail on a LCd monitor. Capacitors usally fail the most. Are the tops of any of them popped up. If you had any shorted transistors the fuse would probably be blown. Usally labeled F1. I would replace all the cap ... Computer Monitors

I have a Dell 1707fp monitor. When I power the monitor on it powers on normally. After a few miniutes, even though the power button is still green the display goes blank. I have tested this on other known good PC's. Any ideas what I need to replace? I am not affraid of taking the monitor apart. Thanks.


I just fixed my for less then 1 minute. Here was the problem, when turn on the PC with the monitor connected. The screen appear like normal for about 2 seconds then shut off black but the GREEN power LED stay on, if i press the power off and turn it ... Dell E173FP 17" LCD Monitor

Westinghouse LCM-19w4 Problem with Monitor turning back on


... Westinghouse LCM-19v1 Monitor

Viewsonic VE175b Monitor Powers Up Doesn't Display Windows OS


Hi; I had the same problem. I know that sometimes devices require you to perform some type of '10-30 second' "hold" of one or some of its buttons in order to 'reset' the device, so to speak. So, having said that, try this:1) Turn your m ... ViewSonic VE175b 17" LCD Monitor

My monitor will go to black after a while and is


First, try connecting the monitor into another computer to isolate the\015\012problem. If it's proven that the monitor is the problem, this monitor\015\012needs repair. \015\012\015\012I'm not sure if your monitor has a board called inver ... Dell E173FP 17" LCD Monitor

My monitor shuts down after one second. - Dell Dimension 3100 PC Desktop


Dell monitors automatically go into power-save mode after a preset\015\012amount of time when the computer is inactive. The Dell monitor will go\015\012completely black, instead of showing a screensaver. This doesn't mean\015\012that your ... Dell Dimension 3100 PC Desktop

Startup problem Hi, I have an IBM NetVista 8303 42G. when I turn it on, it turns itself off automatically and then powers up again by itself and stays static-there is no further loading-the whole time it does this the screen remains blank. The monitor is working perfectly ok-I have checked it on another pc. It seems to be a problem with the processor. There is a green light on it, but the light for loading doesn?t come on. Also if this is any help: there is one beep to be heard when it powers


Try pressing F8 on start up and getting into the safe mode and highlight last known good configuration.\015\012\015\012If still no luck try this:-\015\012\015\012Only other solution is to remove right side panel of pc and locate the JBAT1 terminal an ... IBM NetVista M42 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8697 seconds