Having problems with your Sony VAIO PCV-RS312 PC Desktop ?

Computer problems my computer says no input signal go to power save and then it shuts of what do that mean


Answers :

The computer isn't giving you that message; it's coming from the monitor. It means the monitor is working properly but is not getting any signal from the computer. Your computer is not starting up for some reason. You'll need to find out what is keeping the computer from starting properly.
Repair Help & Product Troubleshooting for Sony VAIO PCV-RS312 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer problems my computer says no input signal go to power save and then it shuts of what do that mean


The computer isn't giving you that message; it's coming from the monitor. It means the monitor is working properly but is not getting any signal from the computer. Your computer is not starting up for some reason. You'll need to find out what is keep ... Sony VAIO PCV-RS312 PC Desktop

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Monitor says no signal


Is this a brand new system? What is the make/model?\015\012\015\012This is a peculiar problem, as the computer was working fine for several months after you purchased the computer, then suddenly started this behavior. The fact that you ... PC Desktops

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Monitor not seeming to work when computer is powered up.


Hi there! Try reseatting the video card and clean the video card if needed and the memory module. ... Computer Monitors

Gateway GT4022 has issues powering up and restarting


1.Yes the Power On switch is okay. (PS. If you hold down the Power On button for 10 seconds on any computer, it will turn off)2.The heatsink held down by springs on the Northbridge, and Southbridge chipsets, is an excellent idea. Wo ... Gateway GT4022 PC Desktop

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

Problem for LG 22" FLATRON Widescreen LCD Monitor LCD Monitor My monitor says analog power save and shuts off. Day before Yesterday I bought a new computer. I got the above mention problem on by monitor mostly when I connect it to UPS. But after that when I connect the monitor to mains the problem still remains. I have to restart my computer. Also before I bought the UPS on main power supply it gives same problem. Asha Joshi


The monitor is going itself to the Power Saver mode.It is not a problem of the monitor.This happens when there is no signal on the monitor.The monitor will display properly when there is an output signal on it.Please connect it to the computer and ch ... LG 22" FLATRON LCD Monitor

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

The laptop freezes after being on for a little while.


Does she have the power saving settings turned on? If so try to turn them off and see if the problem continues. \015\012\015\012What do you mean by the fan does not kick on? If the fan is not working that could definately be part of if no ... Dell Latitude C600 Notebook

Toshiba 5205-s503 won't start up


In my 15 year career in electronics, among other companies, I have most notably worked for United Technologies as Test Engineering Technician and as an Electronic Failure Analysis Technician for Jabil (Circuit.) I am unemployed due to US electronics ... Toshiba Satellite 5205-S503 Notebook

Hp w1907 monitor not detecting vgi input from original HP x3122 computer


It sounds like your computer has been having some trouble for some time. My hunch is that there is nothing wrong with the monitor at all.\015\012\015\012Usually, when you see this warning on the screen that there is no signal, the monito ... HP Pavilion Slimline S3123W Desktop PC - REFURBISHED

My monitor cannot pick up signal.


If your monitor displays No Signal, it means there is no video signal coming from the computer. Monitor is working fine.It may just be the monitor cable. Do you have another one, or one you can borrow from another computer, for a test? ... HP L1706 17" LCD Monitor

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

Wireless connection will not let me surf the net.


Sorry this is going to be a long answer, would be easier in a real time talk, please go one by one on my suggestions to pinpoint the problem and thank you for your patience in advance :)Start your internet explorer/firefox, go to google m ... PC Desktops

When i started my computer it says power save mode ....


Power save mode means there are no signals from your CPU to your monitor.\015\012Check weather your cpu got power on by checking the fan is rotating or not.If it not then replace the power supply.If it working then \015\012check your mem ... Dell Dimension 4700 PC Desktop

Help MONITOR SAYS SIGNAL LOST - REPLACED HARD DRIVE - THOUGHT I HAD A VIRUS. EVERY ONCE IN AWHILE SYSTEM WILL RUN IN EITHER SAFE MODE OR REGULAS WINDOWS. THEN SIGNAL LOST APPEARS. WONDERING IF POWER TO HARD DRIVE IS A PROBLEM MY INDICATOR LIGHT STOPS FLICKERING AND STAYS SOLID. ANY IDEAS. MOTHERBOARD, POWER SUPPLY, ETC?


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

Monitor does not come on when powered on, it says no input signal


Check your video card. It sounds like it has went bad. Hope this helps. ... Gateway 420GR PC Desktop

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Diablotek radeon 9200 problems.....please help


OK, turn-off the computer, remove and replace the BIOS battery, then start it up with the VGA cable in the onboard graphics port.\015\012Press the corresponding key to go into BIOS setup (Del?) and go to the Integrated Devices menu.\015\0 ... Dell OptiPlex GX260 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4109 seconds