Having problems with your Sony SDM-HS75/B 17" LCD Monitor ?

Sony Monitor says "No Input Signal, switch to Power Save"

\015 Just moved into an old house. Yesterday our home computer worked. Just plugged it in and now the monitor says "No Input Signal, Switch to Power Save". Also, Microsoft Ergonomic keyboard normally has lights on it, now it is dark. Computer has power, Monitor has power, CPU is running, but nothing. Help! We start the new job in two days . . . any ideas?\015\012\015\012CPU (Compaq Presario S6000CL) has two lights on front, one Green and one Amber. Amber has a cylinder icon next to it, and normally it is never showing. Today, in the new old house, both Green and Amber are showing.\015\012\015\012Also, we have a really nice battery backup/surge protector. This too has a new light showing on it, light is red by the icon of an Exclamation Point inside a Triangle. ??\302\240\015\012\015\012Are all of these connected symptoms?\015\012\015\012Thanks so much for your help!\015

Answers :

Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and plugging the cpu and monitor into a reagluar wall socket or another working surge protecter. I recommend using the wall outlet for this test. if the cpu and monitor are still reasponding in this manner, its becuse of the surge. its has fried the motherboard.
First of all make sure all the Cable are plugged in tightly....
\015\012
\015\012If that's not an issue, then we need to check the screen resolution... Some time it happen if your screen resolution is greater we will not get any display....
\015\012
\015\012So, we need to restart the computer in Safe Mode:
\015\012
\015\012Windows XP and 2000
\015\012To get into the Windows 2000 / XP Safe mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu" as shown below. Use your arrow keys to move to "Safe Mode" and press your Enter key.
\015\012Note: With some computers if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the startup menu.
\015\012Trouble Getting into Windows 2000 or Windows XP Safe mode - If after several attempts you are unable to get into Windows 2000 or Windows XP Safe Mode as the computer is booting into Windows, turn off your computer. When the computer is turned on the next time Windows should notice that the computer did not successfully boot and give you the Safe Mode screen.
\015\012
\015\012Windows Vista
\015\012
To get into the Windows Vista Safe mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu" as shown below. Use your arrow keys to move to "Safe Mode" and press your Enter key.
\015\012Note: With some computers if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the startup menu.
\015\012
\015\012
\015\012Now you need to right click on your desktop > properties > Settings > Change the screen Resolution to 1024*768....
\015\012
\015\012If this doest resolve the issue we need to check the Video Card on the Motherboard....
\015\012 Reseat the video card and make sure your connections to the card are all good - No broken pin pins etc...
\015\012
\015\012Please reply to me if that doesnt help....
\015\012
\015\012
\015\012
\015\012
Repair Help & Product Troubleshooting for Sony SDM-HS75/B 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Black screen with message about no input signal


Might be something wrong with your monitor's data cable ... Sony SDM-HS95P/B 19" LCD Monitor

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

When the PC starts the monitor does not come out of the power standby mode


Hi The problem is to do with a 680uf capacitor that tends to bulge and fails.this stops the monitor staying on when trigerd to do so,change this and happy day. ... LG Flatron L1715S 17" LCD Monitor

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

Upgraded RAM, Now CPU Says "No Input Signal. Go To Power Save."


I would check the documentation to ensure you purchase the correct memory. If you purchase the wrong memory type, it could cause issues like these. ... PC Desktops

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

17" Sony monitor black, on/off switch yellow


It may not be a inverter problem if your light is orange, if when you\015\012turn it on it says "no signal going to power save" then it is not the\015\012inverter because you can see the message. i am having the same problem\015\012with my sony sdm-h ... Sony SDM-HS73P 17" LCD Monitor

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

Problem Using stand alone monitor with laptop computer


It could just be in the power saving mode. if it is its easy to fix. just go to the notebook mobile settings or battery settings and change the screen brightness or mabey you have a screen brightness changer on your keyboard? ... Dell Inspiron 8600 Notebook

Old monitor not recognized by new computer, stuck in power save.


... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Hi. i have a sony sdm hx7 monitor. when i hook it up and turn it on it says no input signal and input3 dvi-d then it goes into power save, what do i do?


... Sony Computer Monitors

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9323 seconds