Having problems with your Sony SDM-HS73P 17" LCD Monitor ?

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Answers :

Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right input connection on the back of the desktop computer. please check the connection from the monitor to the desktop computer, all connection should be hand tight. Then restart the computer, once the computer restarted on the booting process you should hear a beep sound. and display will pop up on the monitor, if still there is no display from the monitor, try to connect a different working monitor to the desktop computer. If the problem still exist, there is a possible problem with your video card, turn off you computer, unplug the power of the computer to the wall outlet and open the your computer in order for you to see the mother board, look for the video card, remove it from the motherboard and try to clean the gold plated part, the contact were you snap it to the motherboard, rub the gold plated part with an eraser (steadler) in order to remove the dirt that is stick on the contact, then insert the videocard back to the board make sure that its sitted on the slot. then connect the input cable from the monitor to the videocard input and turn on the computer, this should fix the issue, if the problem still exist, replace your video card..
Repair Help & Product Troubleshooting for Sony SDM-HS73P 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Problem Using stand alone monitor with laptop computer


It could just be in the power saving mode. if it is its easy to fix. just go to the notebook mobile settings or battery settings and change the screen brightness or mabey you have a screen brightness changer on your keyboard? ... Dell Inspiron 8600 Notebook

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

Black screen with message about no input signal


Might be something wrong with your monitor's data cable ... Sony SDM-HS95P/B 19" LCD Monitor

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

The screen will not come up but gave this message 'No input signal, go to power save


To isolate the problem, you need a friend with another computer since right now, we don't really know if the video section (or card) of the PC is at fault or the monitor.\015\012\015\012You need to swap displays with someone so you can be certa ... Sony DELUXEPRO SDM-X82 18.1" LCD Monitor

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

Power save mode


Yes, you arent getting a signal to your monitor from your video card. Try replacing. If its onboard then the Mainboard may be bad. These machines are known by Dell to go bad and is covered under warranty, provided you still have it. \015\012 ... Dell OptiPlex GX280 PC Desktop

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

LCD Monitor Why is 19mvwk sometimes work and sometimes all of a sudden says no signal going to sleep. Is sounds like there is a short in the monitor but I am not sure if that is the problem.Please help me


Hi rhymers3,First, check that monitor power save is disabled. Right click on desktop, properties, Screen Save tab, power button. Select "Never" for the "Turn Off Monitor" drop-down box.Also, check that the monitor itself doesn ... Computer Monitors

Old monitor not recognized by new computer, stuck in power save.


... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Not booting up showing green light wont show on screen


Power supply failing. Inside your personal computer power supply are components that can easily fail, and have been a known issue. Nor just Compaq computers, but a vast majority of pre-made computers.Electrolytic Capacitors. ... HP Compaq Presario SR1610NX (ED865AA) PC Desktop

Desktop Computer: No video output until it hits the desktop?


Hi,Well this is a first for me. All the post information and the splash screen is one of the first things you see on initial boot.The nVidia 8800GT is more than good enough for that machine unless it has a fault with it.What i ... Intel PC Desktops

'input not supported'


All I can say is WOW! I have been using my pc with my monitor for months and I was installing a new printer and must have wiggled something loose, and all I was getting out of my monitor was "INPUT NOT SUPPORTED." So I came to this forum, and low a ... Acer AL1916W 19" LCD Monitor

External monitor says laptop is in power save mode and goes blank


Hey jkepthis has nothing to do with power, here is what to do right click your desktop-> properties-> click the settings tab->click the advance button->click the display tab->depend ... Acer Aspire 5610 Notebook

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

No Signal Input at Login Screen


Try safe mode and check power settings. Disply,screensaver tab, power settings. It really does sound like a wire though. ... Computer Monitors

Monitor not seeming to work when computer is powered up.


Hi there! Try reseatting the video card and clean the video card if needed and the memory module. ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1161 seconds