Having problems with your Sony PC Desktops ?

Need to know how cd-r/rw drive unit is connected to motherboard and hard drive sony model #CRX140E -DL interface connector which does clip go on master - slave - cable ?

Answers :

\015\012normaly the harddrive and the cd rom will be the primary master just make sure that the jumpers on the harddrive are set to match the cable ie master on the drive and master on the cable and same for the cd rom also rember this that the colored strip on the connector cable always goes to pin 1on the device ok? hope that this helps please dont forget to rate this solution for me it helps me also.
\015\012best regards mike
Repair Help & Product Troubleshooting for Sony PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to know how cd-r/rw drive unit is connected to motherboard and hard drive sony model #CRX140E -DL interface connector which does clip go on master - slave - cable ?

HELLO THERE\015\012normaly the harddrive and the cd rom will be the primary master just make sure that the jumpers on the harddrive are set to match the cable ie master on the drive and master on the cable and same for the cd rom also rem ... Sony PC Desktops

Installed a new Optical Drive and require assistance in the wiring

What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

DVD drive How do you change out the DVD drive in a northgate pc?

This is a pretty simple procedure, and is basically the same for any desktop pc. Firstly you need to open the case, MAKE SURE THE POWER IS OFF, find the DVD drive you want to take out, it should have 2 screws on either side or clips. disconnect the r ... Northgate (STAX2517C2) PC Desktop

Hard drive problem

Although I covered most of the ways to speed up Windows boot time in another article, I encountered a unique roadblock recently that made me write this article. During the last week I was asked by a customer to upgrade one of their office ... PC Desktops

Installation of a 2nd hard drive steps & tips

Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

New larger hard drive can only be detected as Primary Slave

Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

CD drive is not recognized

Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops

Code 39 i av a acer aspire 7720 my pioneer dvd-rw k17rs ata as stopped work and gives code 39. help

.Turn on the PC. When the HP/Compaq logo screen appears, press the F1 key repeatedly until the BIOS Setup screen appears (on some models this key press may different, F2 or Del) 2.Use the Left and Right Arrow keys to select Main. 3.The ha ... PC Laptops

I was installing a dvd drive, unhooked main power supply in computer, now when I turn on computer it says it needs a systems reboot disc can you help

The computer can't see the hard drive. IF the hard drive is on the same IDE ribbon as the DVD then you have a jumper problem. You need to look at the old cdrom if there was one and jumper new one the same as old one. (Master, slave or cable select) ... PC Desktops

How to install a second dvd player in my compaq

The computer needs to be opened up to properly install the CD or DVD drive into the computer. The method for opening the case will vary depending upon the case. Most new systems will use a panel or door on the side of the system while older systems m ... Compaq PC Desktops

My cd-roms work seperstely but not as a pair. The small 3-prong hookup wire is not connected to anything

By 'work' are you referring to loading software, being able to see the drive in windows and find/access files on the drive,... or are you referring only to playing cd music directly from the drive(s). Most likely the 3 conductor wire you are referri ... Compaq Presario 5000 PC Desktop

Trying to add another internal hard drive to Dell Dimension 3000

Leave the cable connection as it is. That is, one ribbon cable for the 2 dvd drives and the original cable for the old hard drive. You dont need to set the jumper on the second hdd. It has to be set to 'cable select'. Then make sure to connect the se ... Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

Sata as boot and install eide drive as d:or e:

You can slave the EIDE hard drive off of the CD Drive, as long has it is also EIDE. There should be a flat grey ribbon cable plugged into the back of your CD Drive. That IDE ribbon cable should have 2 connectors on it, one of them should be plugged ... PC Desktops

Slave drive how to make a slave drive on dell optiplex 210L

If you are referring to creating a slave HDD, then it is not necessary - as this model utilizes SATA hard drives, there is no master / slave concept; it is in the order in which you connect the drives to the connectors on the motherboard. If your ref ... Dell OptiPlex 210L N (210LNDCELMIN) PC Desktop

Won't reconize DVD burner

Well, the CD ribon cable goes into the IDE 2 slot on the Mainboard and the furthest connector on the other end is the master, the second one closest to the board is the Slave connector. The CD drive has a jumper on the back between where the ribbon ... HP Compaq dc7100 PC Desktop

2nd internal hard drive

\015\012I’m assuming that you have an IDE hard disk drive ribbon cable with 2 connectors on it. One connector is for the primary or master drive. The other is for a secondary or slave drive. Return all jumper ... Dell Dimension 3000 PC Desktop

Have rs480m motherboard need the 2pin sequence to hook up the hard drive ''e-machine t6520''

I assume you are looking to connect another hard drive in your computer.\015\012Most desktop computers have two IDE controllers.\015\012The 1st controller will have the "C" drive set to Master (MA) and there maybe another drive CD or DVD ... E-Machines T6520 PC Desktop

My hard drive is not being noticed - E-Machines eMachines Desktop PC

You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper s ... E-Machines eMachines Desktop PC

Can I add an additional internal hard drive? - HP Pavilion a350n PC Desktop

Hi,Yes, you can add additional hard drive.Please follow the below steps to add the drive sucessfully.STEP 1:Make sure you have room for an extra hard drive, here's one way to do this: 1. ... HP Pavilion a350n PC Desktop

Installing a second dvd drive

1. In your ID cable there are three connectors first one go’s\015\012to mainboard that is blue other two connectors black can go ether any one of\015\012your drive.\015\012\015\0122. Jumper ether one should be in master and other should b ... PC Desktops

I am trying to instal a second disk drive but the system can only trecognise one at a time, how do i get to see both of them? it is a hp desktop 2004

From your problem, it sounds like you are installing an IDE drive. If so, then both drives are most likely set to master. You want your original drive as master and the new drive as a slave.\015\012\015\012If your system supports Cable Se ... HP Pavilion a1410n (ER890AA) PC Desktop

Add slave hard drive

I am assuming IDE not SATA ? did you set the jumpers on the drives themselves? the seagate 80 to master the 20 to slave. The jumpers are on the front of the drives next to the connectors. Next connect to the motherboad behind the master drive or s ... PC Desktops

The computer is asking for system diskette,what should i do?

Are their any disks in the CD/DVD or the floppy drives? That would cause this. It is the most common cause. Is S.M.A.R.T. turned on in the BIOS? You will see a message during the POST that says it is enabled or disabled. The POST is the " ... Acer Veriton 7100 PC Desktop

I need help! I'm a computer novice so please excuse my ignorance. I recently bought an Acer Aspire M1100 desktop (Acer Aspire AM1100-B1410A Refurbished AMD Desktop PC - AMD Athlon X2 4000 2 .1GHz, 2GB DDR2, 320GB SATA2, DVD±RW, Vista Home Premium). Acer told me that these are the specs for the motherboard: ACER F690GVM ATI RS690C SB600 MARVELL 88E8056. I want to upgrade my PC and want to install; AOPEN 20X DVD Rewriter IDE Interface - 20x DVD±R, 12x DVD-RAM, 8x DVD R, 6x DVD-R, 8x DVD±R

Here is what you will need to complete this project: \015\012\015\012Your new DVD burner with the included screws and cable. \015\012A phillips screwdriver. \015\012your new ha ... Acer PC Desktops

When I attempt to log on to my computer, I get message "Loading personal settings", but it immediately changes to "Logging off"...I can't even log on.....HELP!!! I am using an emachines w4685....

Hi, My Name is ArmyMason, I am here to help you. Are you seeing any flash of Blue Screen before it reboots? If not it sounds like you have a boot virus. If you can't boot to Safe Mode best the way to fix this is to pull out the hard drive and p ... eMachines W4685 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6794 seconds