Having problems with your Samsung T220HD LCD Monitor ?

Samsung T220 22" monitor cycles through digital and analog.

\015 T220 cycles through digital and analog. Sometimes it will only stop if I push the menu button. It did it when hooked up analog. I put in a new video card and it did it in digital. Any fixes??\015\012\015\012\015

Answers :

Repair Help & Product Troubleshooting for Samsung T220HD LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung T220 22" monitor cycles through digital and analog.


... Samsung T220HD LCD Monitor

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.


OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

I have s samsung monitor T220 and will not come to show that my computer is connected, I have a message on the screen that says check signal cable with the word digital at the bottom of the message box. The cable was changed and I still have the message. Any suggestions? Thanks in advance


Oh i had the same issue with T220, remove all ur memories , disconnect the monitor , remove the graphic card, clean it and instert it back , insert the memories and then connect the monitor to analog cabl;e first,,, put it on and then shut it down an ... Computer Monitors

No digital signal for SyncMaster T220


... Samsung T220 22" Widescreen LCD Monitor

Samsung t240 monitor lost pic


This problem with the T240 (t240M or T240 HD depending on the coutry) monitor on Windows 7 and maybe on Vista is due to Samsung´s driver witch is not updated to Win 7. You will have to lower your video resolution to 1600X1024 (highe ... Samsung SyncMaster T240HD 24" TFT LCD Monitor

T220 turns itself off / cycles between Analog and Digital Signals


... Samsung T220HD LCD Monitor

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?


The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, ... PC Desktops

I recently purchased a Samsung T220 monitor for my HP pavilion. I do not have a digital plug on my Nvidia sound card. The monitor keeps going blac and analog and digital keep flashing in left top corner. What is going on?


Does it work ok without it plugged in\015\012if so use external speakers they are better sound quality anyway ... PC Desktops

Monitor shuts off and on


I had the same problem, so I switched the Auto Source feature to "Manual" and so far it's working fine for the past 2 days, if I run into the problem again I'll update this message.On the side panel of your monitor, press the top button t ... E-Machines T6520 PC Desktop

LCD display turns pink then goes off


You may be blaming the wrong device.\015\012I suggest you try the monitor with another system, the problem you describe could be located in the video output of your system instead of a monitor fault. ... Samsung SyncMaster 920WM LCD Monitor

Samsung monitor flickers on digital but not analog


Hello,The reason your unit is flickering when in digital mode and not analog mode is because digital mode requires more power than analog. The power supply in the unit is beginning to have a failure in the output filter capacitors so the powe ... Samsung SyncMaster 204B 20.1" LCD Monitor

Monitor switchs between digital and analog


I had a similar problem, the monitor was going blank once in a while (since I don't have a VGA input), so I switched the Auto Source feature to\015\012"Manual" and so far it's working fine for the past 2 days, if I run\015\012into the problem again I ... Computer Monitors

2232bw samsung DVI in problem


There is nothing broken, but you must become aware of the different standards in DVI connectors. 1)DVI-D which you have, does not have the 4 analog control pins around the alpha bar meaning it only works on digital devices.2)D ... Samsung 226BW Monitor

Monitor I purchased a new HP PC with a digital Samsung monitor. IThere is power to the monitor and it worked for a few days but now the power light is flashing. When you hit SOURCE it flashes analog/digital. There isn't an analog option on this PC. How do I get the monitor to operate properly?


Double check the monitor cable, both going to the monitor, and going to the computer. Ensure it's securely connected. If this doesn't change anything, try rebooting your computer. When the power light flashes, it's in sleep mode and doesn't detect ... Gateway FPD2275W LCD Monitor

Samsung T220 Monitor flashes on and off between Digital and analog settings only when I am in drawing programs like Autocad.


... Samsung T220 22" Widescreen LCD Monitor

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

ViewSonic VX2035wm flashes on and off randomly


... ViewSonic VX2035WM LCD Monitor

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

I have a Samsung Syncmaster 2053bw. Screen


First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW. Reply! ... Samsung Computer Monitors

Can't get monitor to connect


There are a few things to look at. It is very obvious that the screen is in good condition since you can see the message on it. Now the problem lies with either the RAM and/or the VGA. If you are using an onboard VGA, try a PCI VGA card. Try to r ... Samsung SyncMaster 2233BW 22" LCD Monitor

Samsung syncmaster 931a... connected to computer


Hi,\015\012its unlikely to be the cable. Most likely cause of this is a faulty inverter board. If you are lucky it will only be 1 or 2 blown capacitors which are easily identifiable and replaceable once you have got inside it. it could however, be al ... Computer Monitors

Samsung syncmaster 730b blinking. switches from


Oct 23, 2009\015\012- This is how it went for me..I have a Samsung SYNCMASTER ... Computer Monitors

Samsung SyncMaster 2243 Monitor wont display analog


Have you tried the dvi output yet? All the onscreen menu's work fine correct? It sounds like its possibly set on the wrong input or setting. But it is possible its something more serious. Once I have more input from you I can assist you further. ... Samsung SyncMaster 2243BWT Monitor

Can't see the bios or dual boot option on my brandnew monitor!!


Have you replaced the VGA video cable (thick cable with many pins). Do you have TWO video outputs ? One on the main board and one video card. If the BIOS is set to run off main motherboard video, the video card output won't work. If you have a vid ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4007 seconds