Having problems with your Samsung SyncMaster 913V 19" LCD Monitor ?

Samsung 913V LCD Monitor--No display when vga plug plugged in

\015 The Samsung 913V shows self test runs fine but when the 15 pin VGA plug is plugged in there is no display. Very confusing. Thanks for your help.\015

Answers :

1. please check by pressing num lock or caps lock key to verify that your machine is booting up, if yes then check the cable and if after changing the display cable it doesnt show up anything, it means you have a faulty unit

2. if numlock/caps lock key doesnt work, then your machine is not booting up, please check for loose ram etc.
Hello
\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.
Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by me and shows how to open monitor, how
\015\012to solve dark screen problem, how to check and replace capacitors, how to solve the problem non-optimal mode (without reprogramming MCU or
\015\012changing the main board) photo are included. 100% functional. The repair process is very simple 30-40min. (does not need a lot of
\015\012experience in electronics and expensive instruments) and is not expensive. With this manual you can solve problems by yourself and save
\015\012money.
\015\012
"Not Optimum Mode 1280x1024 60Hz"
- The monitor turns on but turns off by itself, the LED blinks green.
- If you detach from the PC points to "control cable" the picture runs continuously in the vertical direction or presents while line , and
\015\012as soon as it is reconnected, the monitor goes off.
- The monitor does not turns on and dont dispaly anything, the LED blinks green-lit, if you detach from pc points to "control cable".
- The monitor turns on, works well some time, but after a window apiers "Not optimum mode. Mode recommended 1280X1024 60Hz"
- The monitor turns on, works well only with low resolution 800x600, when try to change a window that reads "Not optimum mode. Mode
\015\012recommended 1280X1024 60Hz"
\015\012
\015\012the manual you can find on ebay (my ebay name is asnerejas123):
\015\012Samsung monitor repair manual guide 710n,913v,510n more
220498646211
\015\012Riparazione - repair Lcd Samsung monitor 710n,913v,510n
220498645860
\015\012Reparaturhandbuch für Samsung 710n,913v,510n und andere
220499443698
Repair Help & Product Troubleshooting for Samsung SyncMaster 913V 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung 913V LCD Monitor--No display when vga plug plugged in


1. please check by pressing num lock or caps lock key to verify that your machine is booting up, if yes then check the cable and if after changing the display cable it doesnt show up anything, it means you have a faulty unit2. if numlock ... Samsung SyncMaster 913V 19" LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Ground Noise Problem Possibly Attributed to Samsung Monitor


Do you have another power adapter to try? Sometimes those go bad, and are pretty cheap to test out (around $35-$50). Otherwise it is the DC-in board on your PowerBook. I replace about 2 of those per month with our clients up here on the PowerBooks ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

RESOLLUTION ISSUES OR GRAPHICS CARD UPGRADE?


Can you please put forth the problem in minimal words? ... HP Pavilion a6650f Desktop PC

Connecting Laptop to LCD


VGA cable doesn't carry any audio: use your audio output from PC into TV audio Input (standard RCA).You need to configure your Display Properties to manage TV screen to get an effective connection.Either you have a generic Video Grafic D ... Acer Aspire 3680 Laptop

Samsung lcd 913v self test ok, no image when vga connected


This problem often occurs in samsung SyncMaster LCD monitors.The\015\012solution is open your look for the LCD monitor power supply module\015\012(which have PCB connector to the AC power), on that board look for\ ... Samsung SyncMaster 913V 19" LCD Monitor

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

Samsung SyncMaster 17" LCD Blacks out


If you have a second monitor, you could use your computer until the monitor goes black... then plug in a replacement monitor. My guess is that one will display black too...\015\012\015\012My gut feeling is that your VGA card is on the fri ... Samsung SyncMaster 17" LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Samsung SyncMaster 215tw screen goes black after about 1 sec.


I have the same problem its defenitly a problem with the lcd monitor not with the graphics card nor the pc. I hooked up the digital and afterwards the vga connection both had the same result. 1 s perfect screen all visible but than black. pushing the ... Samsung 215TW SyncMaster 21" LCD Monitor

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.


Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

Samsung 945NX LCD PC Monitor - whole display is of reddish


Replace the monitor ... Samsung SyncMaster 152 B 15" LCD Monitor

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

HP 2140 mini note does not recognize monitor.


Try pressing the Fn key and F2 key at the same time. Also make sure your tv is on the correct imput. ... HP Mini 2140 Notebook

Whole display is of reddish colour -Samsung 945NX LCD


Try to update the lastest version of your video card driver ... Samsung SyncMaster 152 B 15" LCD Monitor

I have 2 ibm thinkpads t40, on one of the systems the lcd inverter and screen get no power but when i take the lcd and connect it to the 2nd ibm tkpad it works fine, What would be wrong with the one lap top that the inverter wouldnt get power when the colling fan harddrive? again on one system base both lcds work fine, when i connect them to the seconf base the base turns on harddrive works and fan spins but no power to inverter board. how can i fix this


On the second Thinkpad laptop, that doesn't show a display with an LCD screen. Plug a VGA monitor into the VGA port on the back of the laptop. Hold the Fn key down, tap once on the F7 key (Toggle your display over to an external monitor) ... IBM ThinkPad T40 2373 Notebook

Syncmaster 913v I have just unboxed a syncmaster 913v. It would not display from my laptop so I connected a VGA/SVGA test pattern generator. nothing!!!! When I disconect the VGA lead, Check signal appears. I once had a "Not Optimum Mode","Recommanded Mode 1280 x 1024 60Hz"  appear but can not make this happen again. the Screen is ok and the green led seems to stay  on once a signal is detected but no image!!! Is there a common component fault I am looking for?


Hi\015\012\015\012I am a technician-informatic. I have repaired about 60 Lcd Samsung\015\012monitors with thees problems - not optimal resolution mode and dark\015\012screen problem. So i decided to made manual how to repair lcd samsung\0 ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Monitor not working


You will need to change the display settings for the type of lcd monitor you have, it is a wide screen I am assuming, you can change this by right clicking on the desktop select properties then settings the screen resolution should be on the middle l ... Computer Monitors

I just purchased two 40in lcd samsung monitors and connected them via vga to a digital player. One monitor works fine and displays the picture correctly. The other monitor is only displaying the top left portion of the picture and it is much larger than it should be. The company I purchased the player from insists there is something wrong with the monitor settings. Please Help.


If the two monitors are identical adn the player works on one then it should work on the other.Try plugging the monitor that appears "broken" into another device (such as a PC) and see if it works or not. ... Samsung Computer Monitors

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.


More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

Dell latitude d500 had a power socket problem, but now resolved pc will not boot-up, drive spins-up, then nothing, completely dead display i think most likely scenario is mobo is fried, but open to suggestions how tio get this working again


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Latitude D500 Notebook

Lcd monitar not working


If you use OS Windows, try this :Start Menu - Control Panel - Display (double click) - in tab Setting - read this sentences :Drag the monitor icons to match the physical arrangement of your monitorClick in the right-mouse on screen ... Acer Aspire 5500 5570-2609 Laptop

Connecting Toshiba Lap Top to NEC LCD TV


From user manual (page 68):Your computer comes with a built-in display panel, but you can alsoconnect an external display device to an available video port, asfollows:❖ An external monitor or projector via the RGB (m ... Toshiba Satellite A135-S4527 Notebook

Samsung 540n TFT display comes for about 15 sec. with low breightness and then no display power remins on. This happens even when VGA cable is disconnected.


Gptajipcf, When very strange things start to happen with LCD DISPLAYS the first place a Technician will investigate would be the monitors "switch-mode-power-supply" and it's "inverter" supply that supplies 800-1200vac to light up the "cold-cathode-fl ... Samsung SyncMaster 540N 15" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7176 seconds