Having problems with your Samsung SyncMaster 913V 19" Flat Panel LCD Monitor ?

Not optimum mode

\015 When i powered the pc on i always get a black screen with a floating box that states: not optimum mode recommended mode 1280 x 1024 60hz. I can't even see anything to interface and attempt to change. There was no problem before and the resolution or hz rate was changed. hello , i have the same problem , i am a dutch guy and i test it on 2 difrence computers ( good working computers ) both computers wen i started him up the title not optimum mode . so its not the computer , the cable from computer to the monitor is new . i think i gif him a bullet . somwone a better id ??\015

Answers :

This means your computer windows resolution is not display in the correct resolution which your samsung LCD will take.

What you need to do it boot the computer in safe mode. (pressing F8 at start up and select safe mode) This should bring the windows to start up in the generic 800x600 resolution.

Once you are able to see the display in safe mode, go onto the display properties and change the resolution.
* right click on desktop -> properties -> settings

Please rate this if it solves your issue. If you need further assistance please post.
I have the same monitor with same probelm. I dont know if this is problem with samsungs specific model but the only way to work is the follow.
1. connect your pc to another monitor and set the resolution to 1024x768.
2. set the herz to 60mhz.
3. save the settings .
4. connect your samsung monitor with your pc
You must get clear picture. I dont know why it works 1024x768 with 60hz and not at higher resolutions but this is the only way to work the samsung syncmaster 713bm
Repair Help & Product Troubleshooting for Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have the same problem. I get a box with "not optimum mode. But what I need is a picture of the mainboard with the 50 ohm resistor between pin5 and pin6.


\015\012hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done w ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Samsung syncmaster 711p power issue


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 931B 19" LCD Monitor

Not optimum mode


This means your computer windows resolution is not display in the correct resolution which your samsung LCD will take. What you need to do it boot the computer in safe mode. (pressing F8 at start up and select safe mode) This should bring ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

New Samsung monitor returns only a blank screen when turned on. what can I do?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 910MP 19" LCD Monitor

Blank screen i have 3 samsung 740B 17" monitors its been 2 years and i have 2 down,both source buttons light up telling me power is good.ive tried different monitor with the same cpu and it works fine. i have 7 work stations at my work 4 have dell monitors running for 5 years +, and 3 are samsung,which i only have 1 left working now. only had them for 2 years. just woundering if theres anything i can try or are they garbage?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 740b 17" LCD Monitor

Samsung 19" monitor 913n


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... HP Pavilion dv9005us Notebook

Samsung 710V Comes on for a second then shuts down


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 214T 21.3" LCD Monitor

Monitor is going out...


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 940N Flat panel Monitor

Half of the screen is black - Samsung SynchMaster 710N


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 710N 17" LCD Monitor

''not optimum mode'' icon continues to show


Http://www.ehow.com/how_4758816_repair-samsung-lcd-monitor.html#ixzz0wwWvUAf6 ... Samsung SyncMaster T200 LCD Monitor

Monitor turns black and with a not optimum mode pop-up


Press F8 when you boot your PC, Then boot on SAFE Mode...Right Click on Desktop>>Properties>>>Settings>>>Advance>>>Check the Apply the New Setting without restarting.Click Apply then OK ... Samsung SyncMaster 740N 17" LCD Monitor

NOT OPTIMUM MODE


Solder a 50 ohm precision resistor between pins 5 and 6 of the Novatek NT68F63LGI had this same problem on 3 Samsung 710N displays and this fixed the problem.I have read others have also been successful but the va ... Samsung SyncMaster 710N 17" LCD Monitor

NOT OPTIMUM MODE


!!!! IMPORTANT POST !!!!\015\012!!!! IMPORTANT POST !!!!\015\012!!!! IMPORTANT POST !!!!\015\012\015\012I WILL BUY EVERY SAMSUNG LCD MONITORS WITH THE ERROR : NOT OPTIMUM MODE\015\012\015\012CONTACT ME ON [email protected] \ ... Samsung 510N 15" Flat Panel LCD Monitor

Showing "not operating in optimum mode"


Havu you checked on ohter cpu if it showing same problume then 100% your LCD monitor haveing Logic Board Problume it must be in warranty if not in warranty you can contact me ... Samsung 710V 17" LCD Monitor

"Not optimum mode" on SyncMaster913v monitor


In Windows (since it's a laptop I'll assume you're running Windows XP)\015\012right-click on the desktop, select properties, and go to the settings tab.\015\012Click on the display with the 2 in it, then set the resolution to 1280*1024. ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Same problem not optimum mode recommended mode 1280x1024 60hz


Hope this is helpfull \015\012http://www.ehow.com/how_4758816_repair-samsung-lcd-monitor.html for me it was ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Not optimum mode recommended mode 1024 x 768 60hz


Hook up a different monitor and set resolution to no higher than 1024 x 768. Samsung monitor will then work fine. It appears that something fails in the monitor and it will no longer support anything higher than this. ... Samsung 710V 17" LCD Monitor

Floating box non optimum mode recommended mode


You need to adjust the Display screen resolution.\015\012\015\012\015\012Control Pannel\015\012Display\015\012Settings\015\012Screen Resolution ... Samsung Computer Monitors

Samsung LCD 510N Monitor not optimum mode error


Paiarunk,\015\012\015\012OK, I was having a mental block for a bit. Your PC will only boot into VGA Mode, I?m assuming if you don?t Windows will crash or something. Exactly what led up to this, have you added a new video card or loaded new drivers? W ... Samsung 510N 15" Flat Panel LCD Monitor

Samsun 710v not optimum mode problem


You must chang your Mainboard for LCD to fix it ... Samsung 710V 17" LCD Monitor

A box stating not optimum mode-get distorted internet images


Sounds like your resolution is not set correctly.Try going to Start-->Control Panel-->Display and choose the Settings TabUnder there change the resolution slider bar to 1280x1024Should do the trick! ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Samsung syncmaster713bm not optimum mode


Try to adjust resolution you monitor may not support higher resolution change it in the display properties ... Computer Monitors

Not optimum mode


Change windows resolution and refresh rate to 1024 X768 and 60 Hz.start->control panel->display->settings-> change the screen resolution to 1024 by 768 pixels-> advanced-> monitor->change refresh rate to 60 Hz-> ok-> ... Samsung 710V 17" LCD Monitor

Not optimum mode 510v 17" LCD Monitor


Samsung have a lot of liquid crystal display there. The solution is simple: the replacement of an MCU will be able to repair. Samsung LCD MCU sales: ... Samsung 710V 17" LCD Monitor

Cannot display this video mode optimum resulotion 1280*1024 60hz


Hi,Chances are that the video driver for XP and 2003 differs (even if only slightly). You might want to start the 2003 in "Safe Mode" first to lower both the Screen Resolution and Screen Refresh Rate to the lowest possible. Thereaf ... Dell E173FP 17" LCD Flat Panel Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1357 seconds