Having problems with your Samsung SyncMaster 740N 17" LCD Monitor ?

I have samsung sync master 740nw monitor when i on it starts blinking without any display and keep on blinking if i off my monitor also then i plugged out the vga cable after 10 mins the speed of the blinking was reduced and displayed 'check signal cable' then i plugged the vga cable in .the it is working properly but everytime i used to do like this for 2 days.is there any solution

Answers :

There was a problem with your video card. Try to reinstall the video card driver.
Repair Help & Product Troubleshooting for Samsung SyncMaster 740N 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lcd monitor power light flashing with no img. seems 2 be frozen

The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I have samsung sync master 740nw monitor when i on it starts blinking without any display and keep on blinking if i off my monitor also then i plugged out the vga cable after 10 mins the speed of the blinking was reduced and displayed 'check signal cable' then i plugged the vga cable in .the it is working properly but everytime i used to do like this for 2 days.is there any solution

There was a problem with your video card. Try to reinstall the video card driver. ... Samsung SyncMaster 740N 17" LCD Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.

OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

My on button just blinks on and off but when I push it to turn it on..nothing happens..its like it isnt getting any connection

Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5520-5908 Notebook

My monitor just went to a black screen and the green light on the front just blinks. I took it to Best Buy and they connected it to their power supply, but with the original cables, and it worked fine. Brought it home, hooked it up again, and it won't work again. I have an old monitor that I am using and I evem changed the plugs from the old monitor to the new one and it still won't work.

Blinking light is a sign of no signal, try to remove the VGA cord (blue) from the system unit while the green light is blinking,there must have a display, cable disconnected or no signal. if it does, the monitor is okay and your VGA driver/graphics c ... HP Compaq FP5315 15" LCD Monitor

ViewSonic VG2030wm speakers not working

You are unable to get an image on your ViewSonic monitor, first check\012that the necessary cables are attached correctly and that the proper\012drivers are installed. ViewSonic offers drivers for download directly\012through its website (see Resourc ... ViewSonic VG2030wm LCD Monitor

Monitor Turns Black

This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

I've been trying to use s-video cable to connect

\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.

No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Notebook with a cracked monitor

Not to sound argumentative, but it's not a useless paperweight yet. You can still connect an external monitor, and toggle over to it.(Connect a VGA monitor, to the VGA connector on the back of the laptop, turn the VGA monitor on. Hold the ... PC Laptops

Is it my monitor or my video card

1.there might be a problem with your signal cable. if one of the pin in the signal cable is open. it might also happens2.adjust signal cable.3.Check VGA video card is working properly. unplug the VGA card and Re-plug to its slot. if your ... Samsung SyncMaster 551 15" CRT Monitor

VX900, Backlight Works, But no picture.

It is impossible to see defective components visualy, unless there was a serious burn-up or something like that. \015\012\015\012Without at least a DVM you cannot even verify if the power supply is functioning properly!!! \015\012 ... ViewSonic VX900 19" LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.

This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Screen goes blank when I move the mouse

Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Laptop to tv

\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

An Out of range box

Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors

Check signal message when data cable unplugged. blank screen when data cable plugged

This problem is most likely to be caused by a bent or broken pin on the CRT video cable at the VGA connector, OR, this could also be caused by a damaged VGA connector on the back of the laptop.\015\012\015\012If neither VGA connector is at fault, the ... IBM E74 17" CRT Monitor

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.

More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

NEC MultiSync FE2111SB 22in monitor problem

A blinking green light usually indicates no video signal. check your cables, and if you have another computer, try it on that. otherwise, carefully check your vga signal cable, and the connections on the neck board [where the crt plugs into] ... NEC MultiSync FE2111SB 22" CRT Monitor

Hyundai LCD monitor L70N Stuck in sleep mode?

I'm not sure if this is the solution, but something happened. I plugged in the monitor one last time before I was going to throw it out. I plugged in the power but left the VGA cable unplugged in hopes that I could get into the menu screen of the mon ... Hyundai ImageQuest L70N 17" LCD Monitor

DVI input on monitor not working

Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga ... ViewSonic VX2025wm 20.1" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

When it's turned on, the light on my monitor blinks but the screen doesn't display anything. Why might this be happening, and how can I fix it? Monitor will go on for a split second, then screen will go black. Power light is still on and when i turn the screen off and back on the screen displays for a second, then goes black again. I currently have another monitor on the system and it works fine. But something is wrong with the monitor.

They normally turn off like this when they aren't receiving a video signal from the pc (same as when you turn off the pc). make sure that it is connected properly, and that the video output is activated. try disconnecting from the other monitor whil ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0615 seconds