Having problems with your Samsung SyncMaster 713BM 17" LCD Monitor ?

Screen goes blank then displays Not optimum mode. recommended mode 1280x1024


Answers :

Change your screen resolution to 1280x1024 or lower than that.If that too doesn't work log on in safe mode and restore the system to an earlier time.
Hello !!

Welcome to Fixya.com

Right-click on an open space of your desktop and select properties.\015\012Select the settings tab towards the top of the screen. Use the Screen\015\012resolution slider at the bottom left until it diplays 1280 by 1024. Or\015\012conversely, you can click the Advanced button on the bottom right and\015\012then select the Adapter tab at the top of this new window. At the\015\012bottom of the window there will be a "List All Modes" button. Click\015\012this and select 1280 by 1024, True Color (32 bit), 60 Hertz. Either one\015\012of these should do the trick for you. Good luck!

Regard's
Anurag Shukla
Repair Help & Product Troubleshooting for Samsung SyncMaster 713BM 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung 19" monitor 913n


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... HP Pavilion dv9005us Notebook

Screen goes blank then displays Not optimum mode. recommended mode 1280x1024


Change your screen resolution to 1280x1024 or lower than that.If that too doesn't work log on in safe mode and restore the system to an earlier time. ... Samsung SyncMaster 713BM 17" LCD Monitor

Blank screen i have 3 samsung 740B 17" monitors its been 2 years and i have 2 down,both source buttons light up telling me power is good.ive tried different monitor with the same cpu and it works fine. i have 7 work stations at my work 4 have dell monitors running for 5 years +, and 3 are samsung,which i only have 1 left working now. only had them for 2 years. just woundering if theres anything i can try or are they garbage?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 740b 17" LCD Monitor

New Samsung monitor returns only a blank screen when turned on. what can I do?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 910MP 19" LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

Toshiba Satellite a60 password help?


Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess w ... Toshiba Satellite A60 Notebook

Monitor is going out...


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 940N Flat panel Monitor

A box stating not optimum mode-get distorted internet images


Sounds like your resolution is not set correctly.Try going to Start-->Control Panel-->Display and choose the Settings TabUnder there change the resolution slider bar to 1280x1024Should do the trick! ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Half of the screen is black - Samsung SynchMaster 710N


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 710N 17" LCD Monitor

Screen blank pc monitor screen goes blank after a while of being on computor, a box floats around screen saying not optimum mode, recomenned mode 1268x1040 with a small box with a ? mark inside, ? any solutions. thanks carl


Dear car\015\012start system in safe mode ( u can go to safemode by pressing f8 ) then\015\012uninstall display drivers. then restart ur machine it will appear like\015\012normal after that install display drivers. every thing will be normal\01 ... Computer Monitors

Samsung SyncMaster 17" LCD Blacks out


If you have a second monitor, you could use your computer until the monitor goes black... then plug in a replacement monitor. My guess is that one will display black too...\015\012\015\012My gut feeling is that your VGA card is on the fri ... Samsung SyncMaster 17" LCD Monitor

I have the same problem. I get a box with "not optimum mode. But what I need is a picture of the mainboard with the 50 ohm resistor between pin5 and pin6.


\015\012hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done w ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Samtron 73v white screen


This make of monitor is v. strange - refuses to work in non optimum modes etc. I'd get another 2nd hand one... I work in IT and have no end of issues with this model. ... Computer Monitors

Samsung syncmaster 711p power issue


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 931B 19" LCD Monitor

Samsung 710V Comes on for a second then shuts down


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 214T 21.3" LCD Monitor

Monitor problem: not optimum mode recommended mode: 1280x1024 60 hz ? cannot click on screen. Samsung model 913T s


It appears your display adapter is set to a different refresh frequency or resolution, \015\012either accidentally or due to some power glitch.\015\012If you cannot set the resolution because this message is preventing you from getting to ... Computer Monitors

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

I have this monitor and just bought a new computer. When the computer boots up and gets past the "windows" graphic monitor goes black. It worked fine with my old computer and my new computer works with an old crt moniter. I tried setting the res to 800x600 and it still won't work. right before it goes blank I get a box that says "oversize command mode 1280x1024". Any ideas?


You may try the following steps:Boot the computer in safe mode.While booting press the F8 key and on the Windows Advance boot screen, select safe mode and press enter.Once you are on the logon screen, select Administrator acco ... Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Forgot password on windows vista - HP Pavillion ZV6000 Notebook


Vista?\015\012Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last re ... HP Pavillion ZV6000 Notebook

I bouth the computer on auction an already has a password that we do not know and i want to put a new password what i need to do


Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess w ... Dell Latitude D810 Notebook

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

I have a 913t monitor and about 3 months ago it started to go to a black screen with an error message "not optimum mode recommend 1280 x 1024 60 hz" any help???


Click START-SETTINGS- CONTROLL PANEL - DISPLAY - select the SETTINGS tab at the top - click onthe ADVANCED button (bottom right)- select the monitor tab- in the screen refresh rate dropdown box select 60htz- click on apply & ok - back at the disp ... PC Desktops

My monitor has a message floating up and down saying not optimum mode recommended mode 1280x1024 60Hz what do i do


You will have to change the resolution of your screen as well as the refresh rate. Go to the Display settings of your computer and set the resolution to 1280x1024 and refresh rate to 60Hz. Assuming you are using windows vista: ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0969 seconds