Having problems with your Samsung SyncMaster 712N 17" Flat Panel LCD Monitor ?

I have a Samsung 712n monitor that passes a self

\015 I have a Samsung 712n computer monitor that passes a self test but shows no display otherwise. The menu button does not display the menu. It does this on any computer. I have another monitor just like this one that works fine on any computer. I have swapped cables but the results are the same. I have updated drivers but the resulta are the same. I'm wondering if there is some type of default resetting method available in some button sequence. In case you missed it before, the menu button does not display the menu.\015

Answers :

Jcriley, If your SAMSUNG is not to old, try to get them to replace it or do a cash+old unit for a same model refurbished unit! You may have a monitor that has a "switch-mode-power-supply" that is in partial or full shutdown mode. When very strange and weird things start to occur with a LCD fluorescent lamp backlit monitor or for that matter LCD tv/monitor I would always suspect the culprit to be the SMPS!!! Get back to me [email protected] aim or 12fixlouie on fixya after you perform SMPS evaluation test using the flashlight trick to see if the screen data is still being displayed even though the screen appears to be blank. It may only be BLACK, but not blank!! Read some of my other posts here on fixya and also visit a website www.ccl-la.com/badcaps.htm FYI !! It is run by another tech on fixya nickname "buddymc". If you do a second post, give us a little history of unit in question such as age and screen appearance just prior to BLACK SCREENof DEATH setting in! 12fixlouie
Repair Help & Product Troubleshooting for Samsung SyncMaster 712N 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Samsung 712n monitor that passes a self


Jcriley, If your SAMSUNG is not to old, try to get them to replace it or do a cash+old unit for a same model refurbished unit! You may have a monitor that has a "switch-mode-power-supply" that is in partial or full shutdown mode. When very strange an ... Samsung SyncMaster 712N 17" Flat Panel LCD Monitor

Samsung lcd 913v self test ok, no image when vga connected


This problem often occurs in samsung SyncMaster LCD monitors.The\015\012solution is open your look for the LCD monitor power supply module\015\012(which have PCB connector to the AC power), on that board look for\ ... Samsung SyncMaster 913V 19" LCD Monitor

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

My samsung lcd monitor is very dark and can't be adjusted


Hi strat1971,\015\012\015\012So the monitor buttons don't work also right? Yeah, normally you should try to adjust the brightness control first on the monitor. If that doesn't work next step would be ofcourse to check the cabling of the m ... PC Desktops

Samsung Synchmaster 712n problem


This is a common issue with lcd monitors about 2-3 years old. The power supply has an issue. The unit sounds like it has a 1 or more blown capacitors in the power supply. If you are comfortable with working on electronics and with soldering you shoul ... Computer Monitors

Where I can get part for 216bw Samsung


Thanks but The monitor was checked, the technician told me that he tryed to get the video card of the monitor Samsung 216 BW but they don't know were buy a part like this to replace it the broken.\015\012If you can please, let me know where ... Samsung SyncMaster 216BW Monitor

Sansung monitor going black!!


Hello, I have done some research about your product. If you have checked all the cables and connections to make sure the pins are not bent and cables are connected properly, etc. You stated that you hooked the monitor up to a different comput ... Samsung SyncMaster 216BW Monitor

A black flickering line about 5" from the bottom on my samsung syncmaster 793s 17" CRT Monitor


Hi rkarthea,\015\012\015\012Well to narrow down the problem I would suggest first that you try to disconnect the monitor from your APC Back-UPS and just plug it directly to the wall outlet, UPS or surge protectors may cause interference a ... Samsung 793S 17" CRT Monitor

Switching between sources on a Samsung SyncMaster 2033


A computer monitor is not truly designed for the purpose you have in mind\015\012\015\012As far as the VGA connector is concerned it is still meant for connection to a COMPUTER\015\012\015\012The same for the HDMI.\015\0 ... Samsung SyncMaster 910MP 19" LCD Monitor

The monitor turns on and off every 1-3 sec, how do I fix it?


Hi dcalderon128;I'd cover your basics first. Try checking the monitor cables at both ends, make sure they are tightly connected. Next, if the monitor is plugged in to a power strip or surge protector disconnect it and plug it in to the wa ... Samsung SyncMaster 173T (Black) 17" LCD Monitor

My Samsung Syncmaster 245bw LCD displays a blank screen.


Wardysbiz, I should think SAMSUNG would ship you a replacement unit. It might be what is called a REFURBISHED unit of same model.\015\012In future try not to use the word BROKEN. I thought an elephant stepped on it, or it fell from a great he ... Samsung SyncMaster 245BW Monitor

New Samsung 245/bw monitor w/native resolution of 1920x1200


Ensure that your video setting is at 60hz when at 1920x1200. According to the specs of your monitor, the freq from the video card might be set to something higher. ... Samsung Computer Monitors

Samsung 913v Self Test fine but screen goes blank in seconds


Monitor is definitely going bad, one thing you may want to check, if you can get in the back of the monitor you'll uncover two boards, a power board and a main board. Look for any capacitors that are puffy. Instead of a flat silver top they will ha ... Samsung SyncMaster 913V 19" LCD Monitor

My Samsung 216BW is dead I think?


It seems it is the power suply, because some componets inside make that noise that you said. \015\012Or It may be the power cord so be sure the 120 volts are passing some time it can be break in the base rear the monitor.\015\012The probe ... Samsung SyncMaster 216BW Monitor

REDDISH Screen with Samsung Monitor


You should changes the connections first!!!Monitor connected directly to TV/ CPU without passing the projector unit.I think that's the problems!!! ... LG Flatron F700B 17" CRT Monitor

Dell GX270 Maxtor 7Y250M0


If you are getting bad block reports on your hard drive, it means that your hard drive media has suffered some degradation. It could very well be that some system files are being affected by this, thus continually triggering the problem. You may no ... Dell OptiPlex GX270 Small Mini-Tower Desktop (162823025)

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Samsung laptop monitor brightness won't ajust by fn keys


... PC Laptops

When you turn it on, you will see a picture for about 1 second, then it goes blank


Try self test on the screen to do that unplug the blue cable from the tower and turn on the monitor and if you could see 3 or 4 bars then the monitor is ok if not then you need to replace the monitor if it passes the self test then try to boot in bio ... Dell E173FP 17" LCD Monitor

I have a new Samsung 24'' LCD Monitor. I have alot of distortion, almost like a waving effect. Any patches to fix this?


Hi friend try this:\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012- ... Samsung SyncMaster T240HD 24" TFT LCD Monitor

My samsung 940N acts like a florescent tube, tries to start and doesn't


Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

Samsung SyncMaster 213T - DIM DISPLAY


\015\012I would follow the self-test below. If you see the same issue in the test screen then your monitor has lost it's sync and would need a board replaced.\015\012\015\012If it dosn't appear during the test, then you might want to ... Samsung SyncMaster 712N 17" Flat Panel LCD Monitor

Monitor will not stay on


HOw about the light on the tower? if its stedy green then the tower is ok then run a self test on monitor if it passes the monitor is also ok then unplug the power cable from the monitor and data cable also and press and hold the power button for 10 ... Computer Monitors

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5120 seconds