Having problems with your Samsung SyncMaster 2243BWT Monitor ?

Samsung SyncMaster 2243 Monitor wont display analog

\015 My SyncMaster 2243 monitor was working fine. I disconnected the analog cable from the Inspiron 2200 laptop for a few days and turned off the monitor. When I plugged in the cable again the monitor wont display anything. The blue power light comes on and the digital-analog message flashes a few times but the screen stays blank. Touching the menu button shows the message "test good". After a few moments the power light starts flashing. Have substituted a known good VGA cable and tried the monitor on a desktop computer without success. Any ideas, please.\015

Answers :

Have you tried the dvi output yet? All the onscreen menu's work fine correct? It sounds like its possibly set on the wrong input or setting. But it is possible its something more serious. Once I have more input from you I can assist you further.
Thank you,
Ok there is a couple of things that could fix this. First Question you need to look at is does the laptop turn on? Sometimes your BIOS battery can die. That is the part of your computer that keeps the time and date and settings like that. If that as died then your computer is just freaking out. If you unplug the computer for about 15 min it should reset the battery and then just plug your computer back in and it should boot. If that does not work, then the driver on the laptop might have corrupted. This is something that can happen and it has nothing to do with you the user. It is just something that computers do. what you need to do is follow the instructions below to check to see if your driver is bad:
\015\0121. Look for the icon named "Computer" or "My Computer" and right click on it and select properties, this will open a window named "System Properties".
\015\0122. In the system properties windows click on the tab named "Hardware", and Select "Device Manager".
\015\0123. On this window you will see all the devices installed on your computer, look for the device not working properly (printer, dvd rom, keyboard, camera, mp3 player, etc), if there is a bigger problem, more likely you will see a cross by it, or an alert stating there is an issue with it.
\015\0124. Right click on the device you where having problems with and select uninstall, it will give you a confirmation, press OK
\015\0125. Once the device disappeared from the list, click on the menu bar icon that looks like a computer with a magnifying glass this will cause for the system to scan for any devices not registered and will force the re installation of the device.
\015\012This should fix the issue. If you are still having problems then please a comment for us here at Fixya and we will get back to you ASAP
Repair Help & Product Troubleshooting for Samsung SyncMaster 2243BWT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung SyncMaster 2243 Monitor wont display analog

Have you tried the dvi output yet? All the onscreen menu's work fine correct? It sounds like its possibly set on the wrong input or setting. But it is possible its something more serious. Once I have more input from you I can assist you further. ... Samsung SyncMaster 2243BWT Monitor

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?

The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, ... PC Desktops

Moniter keeps blinking analog and digital at the

This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

Samsung syncmaster 931a... connected to computer

Hi,\015\012its unlikely to be the cable. Most likely cause of this is a faulty inverter board. If you are lucky it will only be 1 or 2 blown capacitors which are easily identifiable and replaceable once you have got inside it. it could however, be al ... Computer Monitors

No 1440X900 Resolution Option in Display Settings

Windoze is not detecting the monitor correctly. Right click the desktop as you had before to get to the display settings. Click the "advanced" button at the lower right, on the next window, click the "Monitor" tab, and remove the check from the box f ... Computer Monitors

Extenced Display Identification Data from Monitor's DVI Port is Incorrect

... Samsung SyncMaster 245BW Monitor

Samsung 24bw screen fasdes out like burn in...

... Samsung SyncMaster 245BW Monitor

Samsung GH19LS LCD Monitor wont display computer signals

You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

Samsung SyncMaster 174v will display image for 2 seconds then go black. When I turn monitor off and then on again, it displays image with normal brightness for 2 seconds and then goes black. When I plug the monitor into another computer it does the same thing.

Hi\012\012\012\012\012\012 \012 Normal\012 0\012 \012 \012 false\012 false\012 false\012 \012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012 \012 \012\012\012\012\012\012 /* Style Definitions */\012 ta ... Computer Monitors

Lcd monitor power light flashing with no img. seems 2 be frozen

The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Samsung syncmaster 2253BW blurry/out of focus HELP!

Cables wont make a difference, are you sure your display settings are set to 1680 x 1050? i have had problems when it is set to 1600 x 1000 and i had to reinstall the video card drivers. ... Samsung SyncMaster 2253BW LCD Monitor

Vista shows monitor as a Generic PnP Monitor on ATI Radeon 9550

Hi,You need to download and install analog driver for SyncMaster 930B from ... Samsung SyncMaster 930B 19" LCD Flat Panel Monitor

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little

I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run opt ... PC Desktops

My Samsung SyncMaster 245bw suddenly will not sync with my Dell XPS M1210 laptop. I don't think the monitor is broken because I still get the "check signal cable" box and the "digital" and "analog" messages. It just suddenly started not connecting. I've turned it and the computer off and on in any number of sequences. Help! Laptop screen too small to do my work!

On the laptop keyboard there should be a picture of a monitor on one of the function keys like F8 when you find it press the fn button and and monitor key to go through the external display options. usually the options are press fn and th ... Samsung SyncMaster 245BW Monitor

LCD display turns pink then goes off

You may be blaming the wrong device.\015\012I suggest you try the monitor with another system, the problem you describe could be located in the video output of your system instead of a monitor fault. ... Samsung SyncMaster 920WM LCD Monitor

Samsung SyncMaster 215tw screen goes black after about 1 sec.

I have the same problem its defenitly a problem with the lcd monitor not with the graphics card nor the pc. I hooked up the digital and afterwards the vga connection both had the same result. 1 s perfect screen all visible but than black. pushing the ... Samsung 215TW SyncMaster 21" LCD Monitor

My Samsung syncmaster 730a monitor wont come on. the green light is solid but screen is black. could i have done something or might it have gone bad?

Hi friend,You need you check your display cable. it should be connected in your CPU. sometime cable lose in CPU..then monitor not given any display ... ... Samsung SyncMaster 753S 17" CRT Monitor

Syncmaster 910t blinks image perfectly once and goes back to black

I've had same problem and I fixed it!With good CCFLs, clean supplying voltages, all good capacitors and resoldered junctions, the backlight still turns on for fraction of second and goes off.It is in the Power Supply / Inverter board. In ... Samsung SyncMaster 910T 19" LCD Monitor

Samsung syncmaster713bm not optimum mode

Try to adjust resolution you monitor may not support higher resolution change it in the display properties ... Computer Monitors

Samsung SyncMaster 17" LCD Blacks out

If you have a second monitor, you could use your computer until the monitor goes black... then plug in a replacement monitor. My guess is that one will display black too...\015\012\015\012My gut feeling is that your VGA card is on the fri ... Samsung SyncMaster 17" LCD Monitor

Samsung SyncMaster 710N Monitor SLEEP MODE

Hello,\015\012\015\012The monitor is not going to sleep the power supply board is shutting down.\015\012If you can solder you should be able to repair the monitor yourself.\015\012The problem is caused by blown capacitors on the power boa ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

NO Display I have samsung syncmaster 793mb 17" monitor. I was watching movie, suddenly smoke comes out of my monitor.I have switch off mu monitor and when i switch on there is no display but the green light glow continously even my monitor signal cable is unpluged. I have open it back cover but i did not find any burn out parts. I am willing to check it myself. As I have learned the maintainance course also. EHT is not getting on and my crt back light is also not gloing, so please help me.

I have samsung syncmaster 793mb 17" monitor. I was watching movie, suddenly smoke comes out of my monitor.I have switch off mu monitor and when i switch on there is no display but the green light glow continously even my monitor signal cable is unplu ... Samsung SyncMaster 793MB 17" CRT Monitor

My samsung monitor syncmaster 743nx is not turning on..plss help me...tnx

How to troubleshoot a Samsung SyncMaster 743NX LCD \015\012Monitor?\015\012 My Samsung SyncMaster 743NX \015\012monitor turns on slowly. I mean,last week when I started up my pc,it \015\012took 5-10 mins before my monitor displayed a ... Computer Monitors

Syncmaster paower button blinking and no display

First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW. \015\012 \015\012\015\0 ... Samsung SyncMaster 204B 20.1" LCD Monitor

Samsung syncmaster 730b blinking. switches from

Oct 23, 2009\015\012- This is how it went for me..I have a Samsung SYNCMASTER ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5571 seconds