Having problems with your Samsung SyncMaster 2233BW 22" LCD Monitor ?

Monitor says "Check signal Cable"

\015 Ok, I have a computer that when I hook up to any of the 3 monitors I have (which all worked fine), the monitors won't work. Any help with this would be most appreciated....\015

Answers :

Lilsidetrack -

An obvious cause is that your video card may have taken a dive on you, and it needs to be replaced. If you don't "see" anything on boot up, but what you hear sounds like it's booting, your video card has probably gone bad.

Another possibility is that your video card's settings got changed accidentally, and it's not sending the proper signal to the monitors you've tried. Try booting into Safe Mode (if you have a Windows OS). This loads only the most basic drivers, and if it successfully enters this mode, indicates that your video card is probably OK, and setting might be the issue. Press "F8" during boot-up to get the boot menu, and choose Safe Mode.

You don't say what kind of card or monitors these are. Does your video card have a "TV-OUT" or "S-Video OUT"? If so, the video card is probably set to output to one of these other sources, and not to the monitor. Once in Safe Mode, you can go to you video settings and be sure they are set correctly.

Thanks,

videoman7
Repair Help & Product Troubleshooting for Samsung SyncMaster 2233BW 22" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

My Samsung 913t says "Check Signal Cable." HELP PLEASE!!!


Cheap CRT monitors can be picked up at Thrift Stores, quick and cheap way to test your computer output. ... Samsung SyncMaster 191T 19" Flat Panel LCD Monitor

Help MONITOR SAYS SIGNAL LOST - REPLACED HARD DRIVE - THOUGHT I HAD A VIRUS. EVERY ONCE IN AWHILE SYSTEM WILL RUN IN EITHER SAFE MODE OR REGULAS WINDOWS. THEN SIGNAL LOST APPEARS. WONDERING IF POWER TO HARD DRIVE IS A PROBLEM MY INDICATOR LIGHT STOPS FLICKERING AND STAYS SOLID. ANY IDEAS. MOTHERBOARD, POWER SUPPLY, ETC?


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Wont go to normal start up screen!!!


The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

My lcd screen does not show images projected by the computer, when the RGB cord is unplugged it says check cable setting and when adjusted and it picks it up it still shows nothing


Good day sir/maam, there are several reasons why your LCD monitor acts like the one you say. but let us start with the common ones.\015\012\015\012check your PC if there is the video signal going out to your mo ... Computer Monitors

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Error message on Syncmaster- check signal cable


Sounds like it might be a graphics card. if u have an old graphics or vidio card, open the case and remove your card then install the old one. if it works now youll know your card is bad. If u have an old video card and an open pci slot install i ... Samsung SyncMaster 940B Monitor

Acer monitor lcd problem


... Acer Professional P211 21" CRT Monitor

I have a HP tower and compaq monitor, does this affect the speakers on the monitor? Since I changed the towers out the sound hasn't worked


HP and Compaq are actually now one company. So depending on the age of your tower and the age of the monitor they should be compatible.First you should check the small speaker icon located in the task bar in the lower right hand corner of ... HP Compaq WF1907 Monitor

Hanspree monitor says,''No signal input check video cable''


Ask the shop for a replacement cable. it could be broken. ... Computer Monitors

Problems connecting my acer laptop with tv


Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit


This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

My monitor says Please check the signal cable? I don't get what the problem might me, my monitor is working, because all it shows is Please check the signal cable. All the cables are connected


Try playing with the input settings on your monitor, its happened to me a few times, but yeah just try to do that. ... Likom Futura LD7 17" CRT Monitor

NO signal input, for NO reason!


Check the linked conversations here and ... Computer Monitors

L1928nv monitor no signal or options


May be you have not connected the cable from monitor to the CPU correctly ....just have a check ...if you inserted correctly also just remove it & reinsert it ...check after that ...if same problem persists the ... Westinghouse L1928NV Monitor

NO Signal, check cable


Hi there,you can enable a second monitor when it is plugged into the rear vga-jack while windows boots up and auto-detects it.-by right-clicking on the desktop background, goto: properties - display -settings- advanced ... Computer Monitors

Dell Inspiron Vostro 530s won't boot.


Hi,I work for Dell, If the power button led light is flashing amber or amber (the Power supply is faulty) The Yellow light you saw inside the motherboard is the "Flea Light" (that is one way you could check if there is still power on the ... PC Desktops

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000


Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8798 seconds