Having problems with your Samsung SyncMaster 2233BW 22" LCD Monitor ?

Floating box says check signal cable

\015 It came with a power cord and cable connection\015

Answers :

Plug the blue cable connection into the VGA port (also blue) on the back of the PC and then turn it on. If you have multiple VGA ports and it doesn't work the first time try the other port.

If the cable is white check that you have a white DVI port on the back of your PC and use that port.
Repair Help & Product Troubleshooting for Samsung SyncMaster 2233BW 22" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No display on SyncMaster 710N

I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

Says to check signal cable

... Samsung SyncMaster 2233BW 22" LCD Monitor

Samsung SyncMaster 226BW - floating box "Check Signal Cable"

Had the same issue, called up customer care of samsung and they suggested me to change the cable to D-15 10 series. I was getting the comp o/p on TV but with the "Check Signal Cable" messg with the old VGA cable where some pin is not grounded used fo ... Samsung SyncMaster 2233BW 22" LCD Monitor

Floating box says check signal cable

Plug the blue cable connection into the VGA port (also blue) on the back of the PC and then turn it on. If you have multiple VGA ports and it doesn't work the first time try the other port.If the cable is white check that you have a whit ... Samsung SyncMaster 2233BW 22" LCD Monitor

Samsung Syncmaster 20 inch no signal

It is a fault with your CPU's Ram module(90%). Rest goes to motherboard/Graphics card. ... Computer Monitors

Problems connecting my acer laptop with tv

Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

Dell 1800FP, no signal found (analog). Green LED on, get message

Check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is broken.if any of the pins are broken,try and change the whole signal cable and re-connect it again\015\012after foll ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Acer L5100 and TV Tuner

Try normal arial first.\015\012If OK, try freeview box again. \015\012Check what tuner card you have fitted in Device Manager and check specs on google. Can it receive satellite freeview?\015\012May be new drivers - check Tuner card ... PC Desktops

I have a HP tower and compaq monitor, does this affect the speakers on the monitor? Since I changed the towers out the sound hasn't worked

HP and Compaq are actually now one company. So depending on the age of your tower and the age of the monitor they should be compatible.First you should check the small speaker icon located in the task bar in the lower right hand corner of ... HP Compaq WF1907 Monitor


The resolution setting may have been in inadvertently change to one that your monitor does not support you mentioned that you have another monitor that does work with your computer what i would do is to set the video resolution to the lowest possible ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Sky box saying no sattelite signals

Check the coax connector and the cable, try anoter cable if you have one available.\015\012Good Luck. ... E-Machines eMachines Desktop PC

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Can't get picture

Hello matthew95765,\015\012\015\012The TV is working, the message is coming from the dish box. What you need to do is to determine if the dish box is connected to the dish and that it has signal at the box, because the message it is delivering ... SVA-USA SVA HD4208TIIIBU 42" Plasma Monitor

Dell172fpb 17" monitor

Self-Test Feature Check (STFC)\015\012Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run ... Dell E171FPb 17" Flat Panel LCD Monitor

Main screen only has three boxes BGR

The monitor is telling you it's not getting a signal from the computer. The message is displayed to show the monitor is on and can display an image, but the computer is not sending video. Probably the computer is not starting up, or there has been a ... HP Pavilion a305w (DM181AR) PC Desktop

RGB No Signal Message

First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

Tv does not turn on

When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try first leaving the TV power cord unplugged for some times, let say one hour or so.\015\012 ... Zenith L13V36 13" Flat Panel LCD Monitor

Zenith L13V36 When I turn-on the power button to my 13" television, the screen goes on for about 1/2 second with no sound or picture (it's just black, but you can see the channel number in the upper right hand corner), then it automatically shuts off. What to do? Thanks so much for any assistance.

That sounds like a bad power adapter, a bad inverter , or a bad controller board.When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try fi ... Zenith L13V36 13" Flat Panel LCD Monitor

Mitsubishi diamond pro says "no signal"?

You have tried the monitor on more than one known good computer, yes?\015\012\015\012I believe about 4" inside this monitor in the back the vga cable or connector connects to a board with an in-line connector. Can you see if this connect ... Mitsubishi Diamond Plus 100E Monitor

NO signal since yesterday in area SY7 0QF on Tv can not get any picture or sound was working before

If there is no signal in the area. I mean, if the problem is extended to more than one TV set, then call the TV provider company.If the problem is concerning cable TV (eg. NTL, Virgin), then a local node may be faulty.If ... Tvone LM-1501R 15" Flat Panel LCD Monitor

Monator has no signal

Plugging into the laptop as an alternative monitor needs you to set the Laptop to divert the signal to the external monitor.As you did not mention the laptop I cannot go further  except to suggest you read the manual with regard this situa ... Gateway FPD1810 18.1" LCD Monitor

Powering up problems.

Try using another monitor that you know works. Then try another video card. The fans are running because the computer is running ---but the monitor is not. Green to Amber means monitor is not on.\015\012A lot can go wrong with loose wires that ... E-Machines eMachines Desktop PC

ProView monitor CY-465 Model 468

Jomilshe,\015\012Your monitor not detecting your PC. Check your cable for any damaged pins or changed another cable. Still the same problems...Used another monitor on the same PC. If it OK! Then the other monitor AD board need to be replaced ... Relisys RLT1720 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 3.0478 seconds